MikroTik

ali_hacker

Hello! I was looking around to a find away to run a script based on a filter rule value, for example to add an address list and excute a script handling that list ::: is it applicable? I managed to get the targeted user ip address to be registerd in the address list, and also manage to connect that ...

ali_hacker

Hi
i was looking around for the past few days for a way to block a special section of HTTPS connection , for an example ( https://www.123.com/456)
i would like to block access to it while every thing else is accessible such as (https://www.123.com/) etc.
is that possible
Regards

ali_hacker

thanks for the reply,
but what is the benefits of implementing Eoip tunnels if the load will continue to raise ?
and what is Multicast ? is it capable of doing that? i never worked with this property before

ali_hacker

Hello i was thinking if Mikrotik OS have the ability to do what i have put on the diagram below my idea is to have an IP TV server on Site number 1 that i want to transfer via wireless ptp to my clients on Site number 2 , so if i have let say 100 clients watching tv channels that would result an ov...

ali_hacker

Same question,i was wondering if user-manager work only on hotspot,

ali_hacker

What is the news its been years waiting

ali_hacker

Hi
if you can help me with a script that i can put in PPP profile ((on connect)) that can add the IP address of each new connected client to a specific dynamic address list i would be so much appreciated
Best Regards

ali_hacker

HI I WAS wondering about the script i should put in "on-connect" so it can add the user ip address to the address list:::: if you can help with
Regards

ali_hacker

well i will try and thanks for your reply

ali_hacker

Hello

Is it possible to my pppoe clients to access user panel and check their details or even recharge there accounts , because i tried and every username i tried is not working ,,,it just status that Wrong Username

ali_hacker

Hello

I was woundring if there is a script that can redirect customers that just connected to MT PPPOE server to A specific webpage for few seconds , then they can browse the internet after that normally
if any ideas available i would be so appreciated for sharing them

ali_hacker

Hello i know this sound strange but i did remove the transformer of the ccr1036 and replace it with tow parallel 12 volts battery and its been like this for few years , the problem is that i accidentally connect high voltage to the ccr *(30 volt) and it splash and turned off what went wrong in the b...

ali_hacker

Hello i have a question reference connecting to Mikrotik server using only client wireless device MAC-ADDRESS....SO :D is there is a setting in Mikrotik server that make it able to authenticate clients based on there wireless mac addresses ... if that wasn't quite simple i uploaded a photo for what ...

ali_hacker

Hi guys i do appreciate if you share your experience with us about your best load balance configuration regarding multiple wan, and which is much better for download and upload ,and as i search through the web i didn't see load balance that is talking about upload !so in load balance what happen to ...

ali_hacker

still not working
thank you

ali_hacker

hello
can anyone provide me with most working script to dynamic update my dns with no-ip.com
because i tried most of the scripts and it is not working!
i'm using cloudcore router version 6.1
thanks

ali_hacker

Hi Everybody i have an issue.....i have a special service to my clients which is share server so they can share there files so it was working good until i have problem which is the network start to get overloaded with the data coming from that server so let consider my share server ip address is (19...

ali_hacker

thank you for reading the post but now i just upgrade to v 6.0rc8 it seems to run smoother without the problem shown above
thank you again

ali_hacker

and i forget to mention that i have around 300 online pppoe client and this problem happens randomly between them , i mean its not happening with specific user or client

ali_hacker

Hellooo i just purchased the new CCR1036-12G-4S and i upgrade it so i got a very strange problem reference my pppoe clients which is that so of them get connected with a DR(Dynamic Running) next to there name some is only get the D(Dynamic) just like the image am showing to you below: http://www.im...

ali_hacker

but it got to many bugs just like : pppoe client get connected to router and you got near by the user dynamic but not running!!!!!! and when i remove it and the user logged in again it get running dynamic !!!!!!!! and also interfaces disappear then showed up !!!!is there is solve to that maybe i mis...

ali_hacker

Hello Everyone

i do appreciate if anyone have an idea about how to to downgrade router CCR1036-12G-4S from v6.xx to earlier v5.00 >>>if any one can suggest some sort of method i would be more than grateful..

ali_hacker

Hello my friends, I have a simple question and it is also a suggestion : Can we use (or operate )a usb-webcam that is attached to Mikrotik router OS x86 and make it useable? and accessible? if someone has an idea or even a simple script that can be devloped or suggestion please come forward. greetin...

ali_hacker

Hello
Can anyone please explain in details how to use netinstall to upload a package to a damage

RB .
i appriciate that.

ali_hacker

yeaaaahooo i finally did it now my MT web proxy is working as good as i want him to so thank u guys for your help now i can bypass the cashed objects which available on MT router and deliverd as maximum speed to my clinets and those objects won't be queued (BYPASSED) yea im feeling happy :D :D :D :D...

ali_hacker

patagonia , thanks for th information but i dont know how to make such rules if you can please put an example here and we will be so gratefull for the informatin, by the way im using vpn connection

ali_hacker

i dont know about that lets find out with the other members but if you could explain more

ali_hacker

hulk-bd , i will wait for u when u will be back and i want the information if you could gave it to me

ali_hacker

gmsmstr , what about the TOS if you can please provide me with explain for this option cause i have a very little information about it

ali_hacker

hii there i just wana sk you something.
if anyone know how to config the mikrotik to bypass cash object in another word the cash files will not be queued and would deliver at maximum speed to the clinets when they request it, can any one help me

ali_hacker

hello
i meanthat how to make sure that cashed web page and other object which stored in hard can be deliverd at the maximum speed (as default )but if they want something new from the internet they will be on the limit that i gave them

ali_hacker

please can anyone tell me How to Bypass the cash objects which stored on my microtik hdd?????????pleaaaaaaaaaase[/

color]

Search found 32 matches

Firewall Filter + Script

Blocking part of an URL

Re: Can Mikrotik OS Handle such idea!!

Can Mikrotik OS Handle such idea!!

Re: PPPoE Users

Re: CCR & MetaRouter

Automatic add PPPOE IP address to dynamic address list

Re: Script To Load A Specific Webpage

Re: Script To Load A Specific Webpage

Usermanager With PPPOE. Check balance Not Working

Script To Load A Specific Webpage

Help Needed WIth CCR1036

Can Mikrotik Use Mac Address Base Authentication

Hello Any Idea About best load balance configuration

Re: No-Ip with Mikrotik not working

No-Ip with Mikrotik not working

Helo Needed for limitting one connection from one source

Re: Problem With CCR1036-12G-4S v6.0rc7

Re: Problem With CCR1036-12G-4S v6.0rc7

Problem With CCR1036-12G-4S v6.0rc7

Re: Downgrade CCR1036-12G-4S to v 5.xx

Downgrade CCR1036-12G-4S to v 5.xx

How to Configure USB-Camera with mikrotik

How to use netinstall

Re: MT 3.6 webproxy

Re: MT 3.6 webproxy

Re: Bypass Bandwidth for cashed

Re: MT 3.6 webproxy

Re: MT 3.6 webproxy

Re: MT 3.6 webproxy

Re: How to Bypass the cash objects

How to Bypass the cash objects