MikroTik

4L3xN3t

I was able to upgrade my MikroTik RB5009 and hAP ax^2 without any problems, but have some issues with my CRS310. I was able to upgrade / reboot the packages without any issues, but when I did the upgrade of the firmware the switch got stuck during the reboot and the fan was running at 100%. I waite...

4L3xN3t

Sorry, but I think that when someone receives a notification for a new post in a topic I do not get any notifications by email even for subscribed topics. Been a long time since I last received such an email. Either broken or disabled (globally?). I receive notifications, but AFAIK it's configurabl...

4L3xN3t

the latest beta show the band in wifi/registration but only what ap is using it and what not it is getting better as they do more but yes it would be nice to have Screenshot 2024-10-16 215159.png at least something is alive under the registration hood :lol: the "general" band it's ok, I d...

4L3xN3t

oh, right, I didn't think about the adlist. clearly if you tell devices to ask directly to the external DNS it didn't use the adlist rules.

4L3xN3t

Hi, I did a bit of research and didn't find anything freshly related to this topic. The request is quite simple: it would be nice if it would be easy to identify devices connected to the wifi. I would like to have a column called "device name" where the relative value could be just taken f...

4L3xN3t

happy to help, let me know if it works as expected im running the adlist on the mikrotik not a container anymore I was just wondering why you "downgraded" to the adlist. isn't it more difficult to use and with less configurations capabilities? I use Pihole (both with a raspberry and a cont...

4L3xN3t

Hi everyone, hope you are all doing fine. So, i'm a newbie into containers in MikroTik, but i know some stuff about Docker, i have this problem where i'm trying to setup PiHole as my DNS Server but the container simply refuses to run. I was following this tutorial from The Network Berg but i've enc...

4L3xN3t

Hi everyone, well in the screenshot you posted, please look at the last lines, the filesystem. Normally all content of a container-filesystem (container-store) may not be visible. It is only stated out as a single "container-store" entry. Several times I saw that the container "break...

4L3xN3t

according to my understanding and the way I use successfully those configs, the IP->DNS sections is ment to tell devises what are the servers to use for "local" names resolving. In fact if I remember correctly it's configured out of the box with just the router's IP (eg: 192.168.1.1). The ...

4L3xN3t

Not to be rude...but I think you all have gone a bit too much off topic. Version numbering standards has nothing to do with this specific release and wifi performances depend on hardware, as you said too. Sorry, but I think that when someone receives a notification for a new post in a topic about a ...

4L3xN3t

I remember that I enabled it because otherwise something didn't work, but cannot remember exactly what... I think many "accidentally" enabled it because the mobile MikroTik app requires "Detect Internet" in order to show the traffic graphs on its home screen. mh no, it was more ...

4L3xN3t

Please do yourself a favor and disable detect-internet. I remember that I enabled it because otherwise something didn't work, but cannot remember exactly what... Anyway just did it on the testing devices and it worked...now I'm a bit afraid of repeating the process on the "production" dev...

4L3xN3t

Hi All! I have a RB5009, a CRS309 (connected via SFP+ to the RB5009) and a cAPax (connected via ethernet to the RB5009). They were on 7.15.3 working perfectly till yesterday when I decided to upgrade to 7.16 all of them. First of all something strange happened to the CRS309. Downloaded and installed...

4L3xN3t

maybe I can't understand the typical scenarios on which the project of the CRS304 is based on.... but if I would be interested in buying one I would ask myself "why they put POE in on the 1gbit port? If I was interested in expanding my 10G router ports capabilities, maybe I would be interested ...

4L3xN3t

Hi,
where will be shown these information?

4L3xN3t

I'm from Italy too (I say that since country settings do matter) and I own an AX3. First, I must say that I discovered that some IoT devices do not work well when I tried to play with country settings: greater tx power, but inconsistent behaviour. Maybe it was the asymmetricity (the client was able...

4L3xN3t

I can't change clients antennas so the only possible solutions are: tuning settings, moving the AP or using more than one of them (after testing different positions of course). Yes, but I was referring to the (Mikrotik) AP's. Of course you cannot do anything on a CAP or on another similar device wi...

4L3xN3t

Ahahah sembra una barzelletta, cosa ci fanno due italiani in Lettonia? :lol: Ok, let's continue in English so someone else will understand too :D I can't change clients antennas so the only possible solutions are: tuning settings, moving the AP or using more than one of them (after testing different...

4L3xN3t

Well, after a couple of days I understood something: the cAPax placed in the middle room it's enough but also not :D 5GHz is ok everywhere in the house (mainly thanks to the fact there are only 3 or 4 other AP on that frequencies, so there's room to find a free slot), near the AP there's almost no d...

4L3xN3t

Ok! I took one cAP ax and configured it last night, so I have still nothing particular to share with you about the range etc...except the fact that placed near the old AP (they're still both powered for now) and standing near them, a simple speed test from my phone (in 5GHz) shows bit better results...

4L3xN3t

If you want to keep static DHCP assignments of IPs for that switch, another option is to disable the auto-mac setting , then set admin-mac to the value it would have if veth1 wasn't there competing for "bridge MAC address". I've recently disabled auto-mac for other reasons, because I want...

4L3xN3t

Hi All, I had a RPi4 Pihole for a couple year perfectly working and heard of the possibility to configure a Pihole container into my RB5009 so I decided to give it a try. I'll avoid for now to fill this message with all the ROS configuration, maybe I could post it later if something punctual is nee...

4L3xN3t

No, I meant spherical, this is the thread, I remembered, but that for *some reasons* I couldn't find earlier https://forum.mikrotik.com/viewtopic.php?t=183719 but it doesn't make sense, as in the back if the devices the signal will be 0 or much lower, as there are (AFAICU) reflectors behind the ant...

4L3xN3t

It is not clear at all (at least to me) which "shape" is the coverage of a cap Ax, I have found an old post stating that the older cap (I think it was about the cap XL) that has the similar 4 small antennas had an almost spherical coverage (as opposed to the doughnut like shape of a commo...

4L3xN3t

How do you suggest to position them? on the ceiling? vertically on a wall or maybe on a shelf facing upward?

4L3xN3t

Well, actually I can get 200 to 400 Mbit all around the house (probably the limitation is the device used to do the speedtest. Wired devices goes up to 750. I have 1000\300 fiber that goes 750\275 effective). My minimum needs are 20\30Mbit per devices (3 or 4 at the same times) but sometimes I want ...

4L3xN3t

Hi All, I'm a proud owner of Mikrotik stuff (RB5009 + CRS309 at the moment) and would like to implement my network to try solving some issues I have with other brand equipments. I'll attach my house scheme at the end so it would be easy to understand what I need. JUMP THE BOLD PART IF YOU DON'T CARE...

4L3xN3t

Well, apparently I accidentally discovered the reason why container weren't able to start after a reboot. It was an USB issue discussed here https://forum.mikrotik.com/viewtopic.php?p=1050954#p1050954 I think I will go with the container in the same ip range of the DHCP, but I'm still bit curious ab...

4L3xN3t

it's 3days I'm struggling to understand why randomly the container didn't boot...and I have exactly a SanDisk UltraFit with the same exact behaviour.
I'm going to test the script (and maybe buying another usb stick!)

UPDATE: just to help...the Kingston DataTraveler Micro works perfectly

4L3xN3t

Hi All, I had a RPi4 Pihole for a couple year perfectly working and heard of the possibility to configure a Pihole container into my RB5009 so I decided to give it a try. I'll avoid for now to fill this message with all the ROS configuration, maybe I could post it later if something punctual is need...

4L3xN3t

problem solved.
thanks all

4L3xN3t

Hi All! I'm new here and I'm new to the MikroTik world (I already have a CRS305 swith but I always used it with SwOS so no configuration needed, just plug and go). Well, I have this brand new RB5009 with RouterOS 7.0.5 and I've already configured the basics. so I have now WAN on ether1 and a bunch o...

Search found 32 matches

Re: v7.16.1 [stable] is released!

Re: v7.16.1 [stable] is released!

Re: [FEATURE REQUEST] Adding useful infos in Winbox under Wi-Fi Registration list

Re: DNS Multiple entrys

[FEATURE REQUEST] Adding useful infos in Winbox under Wi-Fi Registration list

Re: DNS Multiple entrys

Re: PiHole Docker container simply refuses to run on a MikroTik RB3011UiAS (RouterOS 7.13.3)

Re: PiHole Docker container simply refuses to run on a MikroTik RB3011UiAS (RouterOS 7.13.3)

Re: DNS Multiple entrys

Re: v7.16.1 [stable] is released!

Re: v7.16 [stable] is released!

Re: v7.16 [stable] is released!

Re: v7.16 [stable] is released!

Re: Newsletter #120 | September 2024

Re: Script to display clients in WLAN (with hostname and accesspoint)

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

Re: Docker - pihole

Re: Docker - pihole

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

Re: WiFi Home Configuration Suggestions

WiFi Home Configuration Suggestions

Re: Docker - pihole

Re: RB5009, RouterOS 7.9.1, USB slot keeps changing

Re: Docker - pihole

Re: Help configuring new RB5009 needed

Help configuring new RB5009 needed