MikroTik

hajid

hi all, i got error 778 when dialing pptp connection to mikrotik pptp server. i use v3.30, echo: pptp,ppp,debug,packet <192.168.8.69>: rcvd LCP TermReq id=0xd echo: pptp,ppp,debug,packet \1DY\04\9A\00<\CDt\00\00\03 echo: pptp,ppp,debug,packet echo: pptp,ppp,debug <192.168.8.69>: LCP closed echo: ppt...

hajid

i have network like this : Office A Mikrotik --- router / cisco --- RB411A wireless AP routing mode --- RB411A station mode --- Office because i need to bridge from office A to office B then i make EOIP tunnel, EOIP work Ok but when i did bandwidth test with EOIP tunnel bandwidth decrease a half. wh...

hajid

i want create file backup with .rsc file, format file=config+date ex:config dec/12/2008.rsc

:global date [/system clock get date];
:global tgl [:tostr $date ];
/export file=("config" . "" .$tgl);

was error " file name "

any one could help me.

hajid

hello guys....any body can help me with ipsec configuration.

hajid

i try tunnel 2 mikrotik router with ipsec. but stil not success. this my configuration : i still can't ping to local lan 172.13.1.0/24 or 192.168.10.0/24 [mas@router] /ip ipsec policy> pr Flags: X - disabled, D - dynamic, I - inactive 0 src-address=172.13.1.0/24:any dst-address=192.168.10.0/24:any p...

hajid

hi dohkoo,

would you please share your config here. i need some reference for ipsec configuration.tq

hajid

hi all, my bgp multihop still not work. i have add static routing to my bgp peer. this my bgp configuration name="peer" instance=default remote-address=x.x.x.x remote-as=xxxxx tcp-md5-key="" nexthop-choice=default multihop=yes route-reflect=no hold-time=3m ttl=255 in-filter=in-pe...

hajid

i can ping and trace to my ip bgp peer. i ever face this problem was long time ago but i forget,
i remember change the value of scope and target scope... please someone could help me please. this urgent
regards

hajid

hi guys,

help me to solve this :

09:11:49 route,bgp,info Failed to open TCP connection: No route to host
09:11:49 route,bgp,info RemoteAddr= x.x.x.x
09:11:49 route,bgp,info RemotePort=179

i use bgp multihop for this.

hajid

hello.....

is there any body can help me....please

hajid

hi all, could any one can help me how to configure bonding with 2 link wireless. i still not success with my configuration: [admin@MikroTik] interface> pr Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R ether1 ether 0 0 1500 1 R wlan1 wlan 0 0 1500 2 R wlan2 wlan 0 ...

hajid

hi all, this my configuration....could any one correct it, i still not success bonding 2 wireless link. tq [admin@MikroTik] interface> pr Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R ether1 ether 0 0 1500 1 R wlan1 wlan 0 0 1500 2 R wlan2 wlan 0 0 1500 3 R wds1 w...

hajid

could any one can post the full bonding configuration here. i still not success bonding 2 wireless link.

hajid

hi all, i still confused with user manager configuration. i want create voucher for time based, how to create with this scenario : limit times : 15 minute but voucher doesn't have limit. it's only limit internet used for 15 minutes but voucher there is no limit. i have create credit : subscriber=com...

hajid

hi all..... this problem same with me but i didn't used bridge configuration.... interface> monitor-traffic interface: INT received-packets-per-second: 2 received-bits-per-second: 1425bps -------????? sent-packets-per-second: 943 sent-bits-per-second: 2.5Mbps interface> monitor-traffic interface: Ga...

hajid

hi all, i have router with this interface below: interface> pr Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R INT ether 0 0 1500 1 X Backup ether 0 0 1500 2 R Gateway-Lt7 ether 0 0 1500 "INT" interface is my uplink to provider and "Gateway-Lt7" ...

hajid

hi all...
could any one explain about this error "route,bgp,error HoldTimer expired"

hajid

hi all... please help me with routing filter.... from my peer i want only recieved /23 and /24 network. i create rule like this, but not work chain=in-indonet prefix=0.0.0.0/23 prefix-length=23 invert-match=no action=accept chain=in-indonet prefix=0.0.0.0/24 prefix-length=24 invert-match=no action=a...

hajid

i all...
it work with routing filter set distance parameter..but at interface 1 see unknown..
please advice

hajid

that will work, however you should already be receiving both routes, and one is not active while the other is correct? The AS PATH length will determine which one it uses most likely. Are you getting both routes via BGP and they are showing in your route table ? yes...i will getting route table vua...

hajid

i have 2 bgp peer. from this peer i will received same dst-address at routing table, so i need configure distance parameter for failover....please help

hello guys....please advice....
is this can work with routing filter...action=accept set-distance=100 for example

hajid

---- yes, i will try to understand this post. - ppp secret is local user list created for ppp interface when it user without centralize AAA. - pptp server [VPN-server] is point to point tunnel protocol server will service tunnel protocol - pptp client [VPN-Client] is point to point tunnel protocol ...

hajid

i have 2 bgp peer. from this peer i will received same dst-address at routing table, so i need configure distance parameter for failover....please help

hajid

ah ... realtek. I think that explains it. I think the only cards that will hit that high of a packet rate reliably are the intel NICs. . . they have way better performance. PCI-X or PCI-e if you can with the mobo you have. Your p4 3.2 should be enough. If your still having problems it might be beca...

hajid

fungsi ppp secret di mikrotik apa yak ?

fungsi pptp-server n pptp-client di mikrotik apa ?

thks

if you from indonesia you can join to mikrotik indonesia forum.

hajid

i usually used command from terminal : #routing bgp advertisement print my-peer

to see network that i had advertise to my peer. what bgp command to see received route from peer ? tq

hajid

Are you trying to load balance between two different gateways? We need a little more information to help you. OSPF and load balancing should do what you want. The manual has examples at the bottom of the pages on how to do OSPF. not load balance, just fail over. i have 2 ADSL internet connection at...

hajid

The manual has some great examples of how to do this:

http://www.mikrotik.com/testdocs/ros/2. ... g/ospf.php

i have tested with 1 gateway to internet and work. then how we set up ospf if we have 2 gateway to internet at different router.

hajid

Seems to work without any problems...

would you please share the configuration with me ? i also want to implemented this.

hajid

internet internet | | LAN 192.168.0.0/24--R1------------------R2--LAN 192.168.1.0/24 | 10.10.10.0/30 | 10.10.30.0/30| |10.10.20.0/30 | | | | |---------R3---------| | LAN 192.168.2.0/24 can any one help me how to set up ospf routing for this network configuration.

hajid

hi all,

please help me with this error...

hajid

i now use mikrotik ver 2.9.38, i also got this error with my bgp. i just restart the router and BGP can established again, but the connection to internet is very slow. what's meaning this error? dec/26 23:09:09 route,bgp,info TCP connection established dec/26 23:09:09 route,bgp,info RemoteAddr=202.1...

hajid

last night i got this error at my mikrotik, is there any body can explain this error? i just restart the router and BGP can established again, but the connection i svery slow. dec/26 23:09:09 route,bgp,info TCP connection established dec/26 23:09:09 route,bgp,info RemoteAddr=202.180.54.138 dec/26 23...

hajid

hi all, i have configuration like this: routing bgp network> pr Flags: X - disabled # NETWORK 0 202.180.55.0/24 1 202.180.54.0/24 2 202.180.53.0/24 3 202.180.48.0/24 4 203.191.43.0/24 5 202.180.49.0/24 4 chain=bgp-out prefix=203.191.43.0/24 prefix-length=24 invert-match=no action=accept 5 chain=bgp-...

hajid

I don't think mikrotik great for bgp right now.... I've problem with it since 2.9.20+++, never tried it again then ;p I think 203.191.43.0/24 already advertised by other provider?? Is this your own ip? your customer ip? or your upstream provider ip? 203.191.43.0/24 is my customer IP. and this IP no...

hajid

what mikrotik command that similar with this command below: show ip bgp neighbor 218.100.27.129 advertise thx /routing bgp advertisment print PEER-NAME Gregor thx Gregor for you info... i have filter like this : 4 chain=bgp-out prefix=203.191.43.0/24 prefix-length=24 invert-match=no action=accept 5...

hajid

what mikrotik command that similar with this command below:

show ip bgp neighbor 218.100.27.129 advertise

thx

hajid

ya sergejs.., i think so that user's uptime is expired, "uptime-used" is equal to "uptime-limit", so how to reactive this user. i have try to add extend time to this user. but this user still can't login. 28 subscriber=cengkir.com name="SOC-Dedicated Link 064" time=5w5d...

hajid

Have you checked the User Manager logs for a reason? Without this info we can't help you too much I am afraid. 17:04:40 pptp,ppp,info <pptp-0>: waiting for call... 17:04:43 pptp,ppp,info <pptp-0>: terminating... - user SOC-DL64-ni3bv authentication failed (6) 17:04:43 pptp,ppp,info <pptp-0>: discon...

hajid

hi all, there is my client can't login to user manager with error messages "failed authenticated". when i look at credit-left=5d7h1m46s, it's mean client still have 5d to login. but i doubt with value uptime-limit=4w2d same with uptime-used=4w2d. then i try to add extend time but at add t...

hajid

hi all, there is my client can't login to user manager with error messages "failed authenticated". when i look at credit-left=5d7h1m46s, it's mean client still have 5d to login. but i doubt with value uptime-limit=4w2d same with uptime-used=4w2d. then i try to add extend time but at add ti...

hajid

hello.....
any body can help me....please urgent.

hajid

hi all, there is my client can't login to user manager with error messages "failed authenticated". when i look at credit-left=5d7h1m46s, it's mean client still have 5d to login. but i doubt with value uptime-limit=4w2d same with uptime-used=4w2d. then i try to add extend time but at add ti...

hajid

is there any one implemented auto failover with 2 bgp peer. would you share with me. if 1 bgp peer down so the network will advertise to other bgp peer automaticly.

hajid

Are you trying to torch on the bridge interface itself? Can you see any traffic flowing through the interfaces? i try to torch all interface at that router but i can see any traffic. FYI Vlan trunking through this bridge configuration. R1 : interface : 1 R Gateway ether 0 0 1500 2 R PTP ether 0 0 1...

hajid

i try torch, but i didn't see any traffic passing through R1. please help..

hajid

i still not success with transparent shaper, is there some one can share with me ?

hajid

hi all,

i have router configuration like this :

R1 as bandwidth manager i configure as bridge.
R2 as Gateway to client distribution.

Internet ---- R1-----R2-----Client
i used queue tree at R1. my question, what interface for upload and download at R1 ? is bridge interface ?

hajid

hi all, i try make firewall to allow pptp connection, i have turn on gre and pptp at service port. then i make firewall to allowed pptp connection to this router. this my firewall configuration : Flags: X - disabled, I - invalid, D - dynamic 0 ;;; Checked For Viruses Port chain=input action=jump jum...

hajid

hi all,

please help me with this case.
----
hai friend,
i think dhcp host should be run like ethernet interface.

Hasbullah.com
----

i don't undestand.. would you please explain more detail.

hajid

hi all,

please help me with this case.

hajid

hi all, i try connfigure pptp server connection with userman authentication. when i see at ppp active session there is 2 user with same login user. is there any configuration to avoid this ? [ajit@Radius.Corexindo] ppp active> pr Flags: R - radius # NAME SERVICE CALLER-ID ADDRESS UPTIME ENCODING 0 R...

hajid

i have hotspot configuration like this : Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R vlan1 vlan 0 0 1500 1 R Public ether 0 0 1500 2 R Local ether 0 0 1500 # NAME RANGES 0 dhcp_pool1 192.168.183.100-192.168.183.254 1 dhcp_pool2 192.168.184.100-192.168.184.254 # ...

hajid

A lot of useful information is placed in the HotSpot documentation,
http://www.mikrotik.com/docs/ros/2.9/ip ... ent#7.41.2

still not understand where is the hotspot zero config.

hajid

dear all,

could please share with me how to configure zero config at hotspot.thanks

hajid

you can try '/tool user-manager export' and then 'import' to another router.

i got this error :

[admin@MikroTik] > import userman.rsc
Opening script file userman.rsc
Script file loaded and executed successfully
input does not match any value of subscriber

please help. urgent

hajid

hi all, i have configuration like this: router 1 : AP bridge (wlan-1) for distribution to customer as access point router 1 : AP station (wlan-2) for backbone to router-2 router 2 : AP bridge (wlan-1) for backbone to router-1 router-2 : AP bridge (wlan-2) for distribution to customer as Access Point...

hajid

hi all,

how to backup user database and userman configuration ? and restore at new ROS.

hajid

in v2.9.28 we will have this feature - the user will be able to login using his hotspot username to the usermanager and check the status of his activities and also change the password... We will update soon the manual how to do that. You should modify the status.html file and you will get a button ...

hajid

Now my 2 bgp peer works.
this solve with add static route to my IP bgp peer and change ttl to"5".thanx all

hajid

change ttl=1 to however many hops you wish to allow.

Sam

i chnge ttl value to 5 i got error
09:20:24 route,bgp,info Failed to open TCP connection: Connection refused
09:20:24 route,bgp,info RemoteAddr=202.53.251.193
09:20:24 route,bgp,info RemotePort=179

hajid

this my bgp log, although has this error state can established. but sometime it will error. another question, is mikrotik bgp default will advertise the network if we not fill "out filter" parameter. because like you can see below i didn't make routing filter out but my peering recieved so...

hajid

for multihop to work you have to add a host route for the remote bgp router to tell it where the peer is. bgp is designed not to talk to remote routers unless there is a static route for it (it wont use learned routes) ok let say I have 2 ISP and 2 peer ISP A : IP Point to Point 10.1.2.0/30 my ip :...

hajid

It means that you are unable to route to the destination. Check if you can ping 202.53.251.193. Eugene Terminal vt102 detected, using multiline input mode [IDC] > ping 202.53.251.193 202.53.251.193 64 byte ping: ttl=243 time=30 ms 202.53.251.193 64 byte ping: ttl=243 time=124 ms 202.53.251.193 64 b...

hajid

hi all,

please help me with this error. i used multihop bgp

16:14:21 route,bgp,info Failed to open TCP connection: No route to host
16:14:21 route,bgp,info RemoteAddr=202.53.251.193
16:14:21 route,bgp,info RemotePort=179

hajid

hi, i still got this error from other my peer and status now doesn't established. 08:47:10 route,bgp,info Failed to open TCP connection: No route to host 08:47:10 route,bgp,info RemoteAddr=202.53.251.193 08:47:10 route,bgp,info RemotePort=179 please how to solve this. the gateway of static route 0....

hajid

hi, i still got this error from other my peer and status now doesn't established. 08:47:10 route,bgp,info Failed to open TCP connection: No route to host 08:47:10 route,bgp,info RemoteAddr=202.53.251.193 08:47:10 route,bgp,info RemotePort=179 please how to solve this. the gateway of static route 0.0...

hajid

ok now works.. but how about default route 0.0.0.0 i still configured static route for it. i recived 0.0.0.0 from my 2bgp peer, when i disable it didn't work. also how do i know my blok IP was advertise to my peer. 0 A S dst-address=0.0.0.0/0 gateway=219.83.46.217 interface=PTP Indosat gateway-state...

hajid

what default value for BGP "target scope" and default value for static route "scope". btw, i still confuse with routing filtering i have read the manual also the wiki and looking for other example at this forum but still not understan... is any can help me.

hajid

how to change this:

by default, bgp routes have "target-scope" value less then "scope" value of static routes. You should set "scope" of the static route to a lower value.

hajid

hi, all i also used multihop..and my BGP route interface became "unkown" then i found this thread. would you please tell me how to change this value. also i got this error 08:54:12 route,bgp,info Failed to open TCP connection: No route to host 08:54:12 route,bgp,info RemoteAddr=202.53.251....

hajid

hi, my bgp peer now established. i have 2 BGP peer. and i have 2 block IP/network. so, i want flexible to advertise my 2 blok IP/network. sometimes used BGP peer 1, sometime used BGP peer 2. please share... this is my configuration: [IDC] routing bgp network> pr Flags: X - disabled # NETWORK 0 a.a.a...

hajid

how can i know that my BGP peer working ? i only see state "active". at old routing packet we can see state "connected" if BGP peer working working.please advice routing bgp instance> pr Flags: X - disabled 0 name="default" as=xxxx router-id=x.x.x.x redistribute-static=...

hajid

the idea of PCG is to use *one* queue for multiple clients. See the following link for details http://www.mikrotik.com/docs/ros/2.9/ro ... 7797108865

Eugene

please, give me clue for my case.

hajid

hi all... i have made mikrotik as bandwidth manger like this configuration : interface : public local for : download name = "Download" parent "local" name = "share" parent "Download" name = " 256 1:4 " parent "share" name ="client 1 &q...

hajid

yes, with routing-test you can have multiple peers, each with their own filters.

Sam

ok i have download it, where i can get manual off routing test.thanx

hajid

hi all,

i want ask about BGP at mikrotik.

i have 2 link backbone, at mikrotik i have 3 interface :

public-1
public-2
gateway

then i have 1 ASN, i want advertise my blok IP a.a.a.a to public-1 and blok IP b.b.b.b to public-2, is mikrotik can do this?

hajid

No, use mangle to mark packets with action=mark-routing, that you need to redirect to alternative gateway. policy-routing examples,
http://wiki.mikrotik.com/wiki/Routing

please example for me. btw, i can't use NAT for this..

hajid

hi all, please help ASAP. i have connection 2 ISP ( ISP1 & ISP2 ), i have public blok IP. i had advertised my public blok IP to both ISP ( i don't have AS number ). then i want control incoming packet to dst-address that i have will coming from ISP1 or ISP2. example my public blok IP : 202.53.12...

hajid

hi,

i have 2 internet conection to local internet exchange.
gateway 1 : x.x.x.x
gateway 2 : y.y.y.y

default route x.x.x.x
i have client with IP z.z.z.z and i want incoming from outside to IP z.z.z.z come from gateway y.y.y.y

note : i don't have ASNumber..
how to configure rule for this .

hajid

there are not any problems with NAT. You have to verify your configuration. # ADDRESS NETWORK BROADCAST INTERFACE 1 192.168.183.1/24 192.168.183.0 192.168.183.255 local 2 192.168.184.1/24 192.168.184.0 192.168.184.255 vlan1 3 10.12.10.113/24 10.12.10.0 10.12.10.255 public-2 4 192.168.0.233/24 192.1...

hajid

hi all,

please help me how to configure routing with DVB downlink only, for uplink i will route to another internet connection. for this case i don't want use nat because at mikrotik router distribution i still have public IP that i will give to my client. i still don't have AS number. please urgent.

hajid

hi before i upgrade from 2.9.19 to 2.9.27 i can used several src-nat, to nat my local IP to several public IP, but when i upgrade to 2.9.27 i can't used again. is there any bug with 2.9.27 at src-nat?

hajid

hi all,
now i have to 2 connection Satellite Downstream Only and FO connection.
all outgoing packet will go via FO connection and incoming packet to some IP will come from Satellite connection. how to configure mikrotik for this case. i don't have AS number.

hajid

Yes, probably PCQ queues will be the best option for you. If you want to divide equally traffic between 4 sites. i have made queue type like this : name="pcq-download-512" kind=pcq pcq-rate=512000 pcq-limit=50 pcq-classifier=dst-address pcq-total-limit=512000 but i still not understand ab...

hajid

i have pipe to internet 512 kbps. then i want share to 4 site, ratio 1:4, when bandwidth full i want each site got equal banwidth at 128kbps CIR. i have read manual and suggest to used pcq method, please sharing.

hajid

hi all, i have mikrotik transparent proxy at ip x.x.x.x ( public ) now work well, then at other mikrotik gateway y.y.y.y want used proxy at x.x.x.x if both mikrotik at same segmen IP, at gateway i just mangle port 80 traffic then i add default route to x.x.x.x for port 80 and work. but when other mi...

hajid

i have web proxy setting like this : enabled: no src-address: y.y.y.y port: 8080 hostname: "proxy.problem.com" transparent-proxy: yes parent-proxy: 0.0.0.0:0 cache-administrator: "obby@problem.com" max-object-size: 4096KiB cache-drive: secondary-master max-cache-size: unlimited m...

hajid

hi, i have make several ip firewall mangle and queue tree for limit the bandwidth for each segmen IP of my client. then i want use voip qos to this segmen that i have made. any advice for it. i configured like this: chain=prerouting src-address=124.81.64.80/30 action=mark-connection new-connection-m...

hajid

does any one know how to make bandwidth priority for voice aplication like skype,YM voice, Voip h323 & sip etc.
first i make bandwidth limitation for each block IP segmen( it work )
then i want add voice priority to each block IP segmen. thanks

hajid

at Mikrotik pptp client hard to dial pptp server. i have also tested l2tp and it work ok. is there something i missed ? one more question, what port that l2tp connection used ?

hajid

i have configure mikrotik pptp server then i tested with PC win XP it's work. i can dial to pptp server but when i make pptp client at other mikrotik server it's hard to make connection. please advice

hajid

is there any update for pppoA protocol. i need this for my ADSL conection.

hajid

i have added this command to ip firewall dst-nat for YM port 20,23,25,80,119,5050,8001,8002,5100. i got this from YM help website
example:
add in-interface=LAN protocol=tcp \
dst-address=!192.168.0.1/32:5050 action=redirect to-dst-port=8080
still can't connect to YM.

hajid

i have succesful setup transparent proxy at mikrotik. but when i connected to yahoo messenger it can't. is there something i missed?or what i must do?

hajid

hi,
i want monitoring port usage at mikrotik. so, i can know the traffic port mikrotik used,etc 80,25,110. and make some graph with jfnms or cacti. is there someone can share with to do this.

Search found 96 matches