MikroTik

rolo95

ohh, so i only needed to add VLAN100 to the WAN list
corrrect ?

rolo95

# 2024-10-14 14:33:54 by RouterOS 7.16 # software id = M9E3-20WA # # model = RB952Ui-5ac2nD # serial number = 12345678901 /interface bridge add admin-mac=00:00:00:00:00:00 auto-mac=no comment=defconf name=bridge /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40...

rolo95

Hello, networking level from 1 to 10, i am in number 2 i have a RB952Ui-5ac2nD using it as HOME AP DUAL ( in quick set ) when i plug the RB952Ui and connect ETH1 ( WAN ) to the wall i did not get any ip on the WAN interface so i asked the IT guys on the office and he told me that they use VLAN 100 a...

rolo95

Report it to MT
so they fix it in the next update, ( i hope )

rolo95

I have the same issue after updating to 7.15 but when I downgrade to 7.14.3 IOT connect normal

maybe the OP can compare your config vs his, and that way see if it is config problem

rolo95

can you access the unit trough winbox ? if so try ( see the pics below ) https://prnt.sc/D9_ousClOpPi then click like the pic below https://prnt.sc/AQeBtLLi9C10 that must reboot the unit and go back to factory user admin pwd must be on the label in the bottom of the unit or now pwd and will as for p...

rolo95

i saw something similar on other post
problem was the MTU , it was tweaked some how
so set it back to the default

cant recall
on mine is 1500

try 1500 and report back

rolo95

Esebm, i hear your frustration with Mikrotik Routers, i just want to add that Mikrotik are along the lines of Cisco and Juniper, so that is enterprise level networking equipment. if you do not have prior experience setting/config those devices like the ones i just mentioned sorry but you are out of ...

rolo95

no ,they are not equal

rolo95

Those 3 return public IP address of my current location but literally nothing more.
I guess that's the intention ?

same thing as
https://www.whatismyip.com/

rolo95

i have the cloud on and the idme thing gave me the same ip was when i go to whats my ip web page it is 107.x.x.x but inside winbox under quickset i see internet ip 10.x.x.x that is double NAT right cause my PC have the MT NAT 192.168.88.x then the internet have 10.x.x.x then the oustside is 107.x.x....

rolo95

They are ATT data sim cards
but if i reboot the LTE modem
they change
if that is what you mean

rolo95

Thanks for that encouraging tidbit LOL. LOL c. find an MT friend who has a public IP that will allow them to use their router as a conduit, your android and MT device connect to his router and get connected there together. a static ip qualify ? if i think i have a friend who have Spektrum biz and t...

rolo95

Anav, RBSXTR is a mispbe device only Arm,Arm64 and TILE devices have the BTH function embedded in to ROI i guess mispbe flash area is reduced so there was no space to include the BTH code maybe some MT guy can chime in and explain so no BTH what are my options if any.... or just get an ARM device an...

rolo95

crossing my fingerS !!

rolo95

Hello, can someone help in how to setup a wire guard VPN so i can connect my MT android app to my LTE device thanks a dump file below for reference # 2024-05-29 09:26:22 by RouterOS 7.14.3 # software id = A2N8-****** # # model = RBSXTR # serial number = HG1******** /interface bridge add admin-mac=18...

rolo95

10-4
Thanks for you Help !

rolo95

It's a pity they don't support the MIPS platform for BTH for some weird reason. But there's always the "regular" WireGuard that BHT also uses. The important thing is that you never expose ROS services directly to the internet. Btw, you can attach files to your posts using the "Attach...

rolo95

...i added the firewall run so to open port 8291 but no luck, i cant connect to the router with winbox from the wan port @rolo95 - Just some friendly advice: never ever expose your router services, like port 8291, for external access through the internet on the LTE/WAN port. Instead, use a VPN like...

rolo95

I lost you, in the title you talked of a WAN port? :-? It is entirely possible that you have changes in the configuration that reverse the default logic of Mikrotik (winbox access only allowed from LAN side) Anyway, if you can *somehow* connect with winbox from one of the ethernet ports or via WI-F...

rolo95

i can reach the box via the public IP
when i ping it
but some how winbox refuse to connect.
it just times out

rolo95

it is a SXT R that have an EM06-A LTE RADIO
and so im assuming the WAN is on the LTE side ?

what commands i need to do on the terminal so i can pull the info you need
i dont know on what part to look in winbox

rolo95

Guys, i added the firewall run so to open port 8291 but no luck i cant connect to the router with winbox from the wan port ping to the wan works firewall rules are stock i just added the winbox one look the pic below .. line 5 . https://prnt.sc/uQJN3eIScuM2 routerboard model below https://prnt.sc/fq...

rolo95

Thanks! i did that and now is working but , i saw posts that other people make it to work without tapping the pins it was a ROYAL PITA to just hit that little gap of pins does anyboday have done it wothout tapping the pins ? and how come the SXT series work with the EP06A right off the bat and the w...

rolo95

Ok, so the only way I made it to work was Tapping off the 4 pins that USB3.0 use So looks like the Wap series only support USB2 And the SXT are USB3 PCIm capable Can someone confirm this? PD. Is MT going to add M.2 slots to their LTE router boards? The high end 5G modules do not use PCIm but the M.2...

rolo95

I used this on mine https://www.amazon.com/SING-LTD-Female-Pigtail-Antenna/dp/B07Y6926KN/ Just draw 2 holes on the sides to install the sma pigtails And used 2 of these https://www.amazon.com/600-3980Mhz-Directional-Connector-Wireless-Extender/dp/B0BG6PLX2L/ Just a word of caution .... I choose SMA ...

rolo95

ok looks like the wAPR is only usb2.0 complaint and the Quectel comes as USB3 mode by default so i need to stick the EP06A in an usb3 device... change the mode to USB2 and try again i do not have a USB3 device so maybe an external USB to PCIe adapter and use a PC to switch the mode? as of today my w...

rolo95

is it my perception
or MT are just looking to the other way regarding wireless subjects ?

rolo95

Set the APN to
If you using a phone registered sim card
NXTGENPHONE

If it is a data only sim card (hotspot)
Use
Broadband

That is for AT&T

rolo95

Quick follow-up to this. After reverting back to our CCR1036s 6 months ago, the issue has subsided completely. There's clearly a hardware issue with the CCR1072 platform, but obviously MT are never going to admit this. Yes, absolutely. They will just keep making new products and funny youtube video...

rolo95

hey, i have the same issue ************************************************** After the second reboot... the card SHOULD just show up under /int/lte BTW: Install ROS 7.1beta5 *********************************************** nop... my card EP06-A do not show up.... do i need to downgrade to to 1 beta5...

rolo95

I just installed an EP06-A in to an RBwAPR-2nD and i cant see the modem in the interface list i had an R11e before and it worked ok i am on 7.9RC1 and downloaded the extra packages and installed the LTE package rebooted and nothing. i saw a thread were somebody needed to short some pins on the board...

rolo95

nice suggestions guys, leaving the sim inside is a recipe to short something inside i do not want to take the risk as as water sealing i will put something in to the line where the 2 pieces close together Arrgghh why MT do not use screws and maybe rubber seals that "snap in" plastic approa...

rolo95

Guys,

i accidentally dropped my sim card inside and i shake the unit to try to get it out with no success
so i need to open the 2 halves of the case to retrieve my sim card.
Thanks

rolo95

I have opened a support call with Mikrotik, we'll see if I can get them help me downgrade but I am doubtful. For now they've asked me to provide some logs and config dumps. i hope that they help or hope that Quectel help to get the original Radio Firmware. i use to have one old CAT4 LTE module from...

rolo95

but you need a reader app or something so to read the binary from a quectel radio maybe if you contact quectel they will provide a reader/writer app i can copy that from one of my "VIRGIN" ones but i dont have a MiniPCI USB reader also , how do you open those things i mean mine SXTR&EP...

rolo95

Upgrade to V034 since 13 days : No CA since the upgrade (RBLHGGR) Reboot, upgrade to lastest ROS 7.4.1: no CA. No problem with CA with the previous version, of course. Hello, I have a strange issue with my SXT-LTE6 which I think could be coming from this V034 firmware. On my site I've been enjoying...

rolo95

Hello. What latest fw build for
R11e-LTE
R11e-LTE6
Thank you

For some reason MT did not provided a way to Upgrade the Firmware on those via AIR (cell provider)
they want you to use an USB to miniPCI adapter.

why ? idk
they just did not want to or was too lazy to implement it

rolo95

There is different command set on R11e-LTE cards. Currently we don't have complete reference guide published out yet. Scan is running in background at all times, latest RC releases should print some usefull info in logs. I guess 5 years is more than enough to roll out a complete reference guide for...

rolo95

Thanks guys!!! that was it!!!! DUH!!! and i downloaded the extra packages but did not UL any of them when upgraded to 7.8 neither when downgrading to 7.6 and yesss.... whatever version you install on your mikrotik you need to use their matching version of extra packages 7.6...with 7.6 extras 7.8 wit...

rolo95

Guys, i just get an L41G-2axD came with 7.6 all was good, so i do not follow the "if aint broke dont fix it" so i installed 7.8 and my radio interface dissappearead then i downgraded to 7.6 and same thing. what i notice is that on quickfig there is not homeAP anymore, only ethernet does th...

rolo95

Most of us do not block ping because its an essential tool for debugging issues and because its useful for some functionality. Most of us have no issues with this setup. In other words dont feel as if it something you have to do, I certainly dont recommend it. To access the winbox remotely use wire...

rolo95

Thanks Buddy.
btw,
how do you block the ping from WAN
right now i can the Public IP of the box

i dont want to be a target of those guys doing IP scans
and attacking whoever responds to the ping
also i want to access the box with WINBOX from my remote location

rolo95

gezz the the device is 2 hours from me
and do not have the remote admin enabled.

hopefully tomorrow i will go to the remote cabin and pull the config file
ahh
just found this

MIKROTIK.DHCPSERVER.jpg

rolo95

Hello, i just get an SXTR&EP06-A US model latest model 1st thing i notice is that the default IP was not 192.168.88.1 as always it changed to 192.168.188.1 then the default password was not BLANK... i had a super hard time resetting the box several times and could not access it the when i was lo...

rolo95

anyone ?

rolo95

Hello, i am on RouterOS 7.3.1 with an R11e-LTE-US RADIO on Firmware v05.03.183961 using winbox i click on upgrade firmware and it says checking..... and it stays there but it do not upgrade, also the data flow stops from the LTE link i need to reboot my LHG unit in order for the LTE data to go back ...

rolo95

So the whole truffle thing is a scam, no real carrier aggregation ala LTE cellular radio style

rolo95

Yeah,
mikrotik released the US version of the CAT6 modem just after i bought the International version,
anyway, i returned the unit and got a CAT4 one US,

rolo95

i was able to disassemble the whole thing, you just need to pull the center tab on the front cover and the whole thing comes out ( board with antennas ) the bas thing about the sim card holder is that you can push the sim card much more deep than the required position, that makes a NO sim card error...

rolo95

Guys,
i always wondered why miKrotiK use those super hard finicky SIM slots
this is not the 1st time i get a stuck sim on LTE units

on the LHG LTE KIT i was able to open it and remove the SIM
but on the wAP i did not see how to open it
any ideas?

rolo95

have you checked this ? https://mikrotik.com/product/lhg_lte18 yeah but is the international band version not the the US LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) the US versi...

rolo95

Dear miKroTIK, when you guys plan to release the US version of the CAT6,12 and 18 LTE Radios ( for USA frequency LTE bands) I have the R11-e-LTE-US ( that is a CAT4 LTE radio ) works great i can get speeds up to 70Mbits with it, so i am excited on what speeds i can get with the CAT6,12 or 18 i tried...

rolo95

ic
the bonding device is called the truffle from mushroom networks
i do not know they achieve what they claim.

rolo95

Hello All, i know that RouterOS can load balance between different interfaces What i want to know if there is plan to implement true interface bonding similar to LTE carrier aggregation imagine having 2 home cable modem service that gives you 40mbit DL speed each can be possible to implement the CA ...

Search found 55 matches