tx-phy-rate is 2.3Gbps, so the wireless interface is not the limiting factor. You're maxing out at 97.1Mbps, that sounds suspiciously like you have a 100Mbit ethernet connection somewhere. The first screenshot showing the speed is RouterOS tool (tools-->SPeedtest) from one LHG 60 to the other LHG60...

Hello, I have a LHG-60G and the connection works, but is very slow. Screenshot 2024-06-06 152202.png [admin@Richtfunk-ALMA] > /interface w60g monitor 0 connected: yes frequency: 58320 remote-address: 18:FD:74:6A:15:26 tx-mcs: 8 tx-phy-rate: 2.3Gbps signal: 95 rssi: -56 tx-sector: 5 tx-sector-info: r...

Hello, I have a point from where I need two wireless lines. One is One is about 280m One is about 40 meters. However the lines "only" differ about 45° angle (one is from roof to roof, the other is from roof to ground). If I use two wireless wire lines the dishes on one point will be very c...

I now tried another Intel E810 under esxi, I also tried another DAC-Cable and Mikrotik XQ+31LC02D with the same result.

EDIT: Intel E810<>Intel E810 DAC works perfectly.

Hello, I have a CRS504-4XQ-IN. I connected it with a CRS354 over 40G DAC cable. To do that I set qsfp28-4-1 to qsfp28-4-4 to 10G each, disable auto-negotiation Now I want to connect a linux server using 100G. I got an Intel E810 and the linux drivers installed. However on the RouterOS side I only ge...

I do NOT want to use L3 anything.

I did a factory reset. (System --> Reset configuration). After reboot I changed the admin password. I did not do anything else at all.

CPU: 100%

No VLANs no nothing. That cant be normal, right?

how do i correct that best? is it enough if I delete the bridge? are the coresponding vlans deleted to? or do I need to totaly factory reset the switch?

thanks
Daniel

Did you enable l3hw offloading? This is primarily a switch and while there are some layer 3 routing features offloaded to the switch chip, the CPU is not going to be able to handle much routing outside of the functionality in the l3hw offloading specs. As far as i am aware simple VLAN should be L2 ...

my config: export hide-sensitive # jan/02/1970 19:45:50 by RouterOS 7.3.1 # software id = 7GPA-Q0WH # # model = CRS354-48G-4S+2Q+ # serial number = XXXXXXX /interface bridge add admin-mac=DC:2C:6E:B3:AB:FB auto-mac=no comment=defconf ingress-filtering=no name=bridge1 vlan-filtering=yes /interface vl...

Hello, I have multiple CRS354 switches. I added VLANs in RouterOS. Now the switch has 100%cpu load and a high package loss. I believe I used this to set up the VLANs: https://help.mikrotik.com/docs/display/ROS/Bridging+and+Switching#BridgingandSwitching-BridgeVLANFiltering I used (my comment after #...

Ok thanks for that info. I already found the compatibility matrix, however I am unsure how to interpret it. The XQ+BC0003-XS+ (100G QSFP28 to 4x25G SFP28) would work with the CRS504-4XQ-IN. However would it also work with the CRS354? I did not find it in the compatibility list there. Thanks Daniel E...

Hi, we just bought a CRS504-4XQ-IN which has 4 100G QSFP28 ports and two CRS354-48G-4S+2Q-RM which have 40G QSFP+ Ports. What are the options on connecting the 100G QSFP28 to the 40G QSFP+. Is there a 100G QSFP28 to 2x40G QSFP+? Or 100G QSGP28 to 4x25G QSFP+? And can the CRS354 handle 25G QSFP+? Tha...