I forgot to mention that the netinstall would only work on Port 1 - labelled Internet.

Hello MikroTik enthusiasts. I am submitting this topic as it may help someone else who spent hours on attempting to "de-brick" a MK device. The entire situation only happened as my long-suffering wife decided to swap the dining room with the lounge and did not want a cat6 ethernet cable ru...

Hello all, After the last RouterOS and firmware updates I noticed that some of my scripts (using MQTT to Home Assistant) were not working. Logfile showed absolutely nothing but /system script run produced a syntax error at this line: /interface lte info lte1 once do={ (This change is mentioned elsew...

Thank you for this. I came across a similar problem in attempting to send a floating value via MQTT from the LTE1 interface. This is my "noddy" solution: :if ($rsrqLen > 2) do { :set $intpart ($rsrq/10) :set $decpart ($rsrq%10*-1) :set $rsrqvalue ($intpart . "." . $decpart) } els...

Home Assistant monitoring of modem and router...

All the failures were sorted out after a firmware upgrade.
The system is now stable.

r11e-lte6_028 is stable in my opinion.
with ros7.1beta7 I have a flapping lte1.. but ros7.1rc2 fix this. Any bad logs... .

Thank you, SiB. My version of the modem is R11e-LTE6_v025. Should I update it?

I'm seeing this issue again with v33 firmware and can't find a copy of the v28 firmware to load back onto the modem. Anyone able to help? Hello Timmay2, I have added some detail on my experience of the same errors on the General Forum but here is a precis: Only had the kit installed for a day when ...

It seems to have had many problems overnight. Here is the sequence from the last time the modem went down: 09:09:00 lte,error lte1: reply timeout for: AT+EEMGINFO? 09:09:00 lte,account lte1 session: 193s 10412808/580801 bytes 9206/2303 packets 09:09:00 interface,info lte1 link down 09:09:01 lte,asyn...

Hello to you all, Firstly, I am completely new to cell phone technology - indeed my wife says I am living in the stone age - but a quick learner and have spent decades doing IT support, albeit older systems. Secondly, I was quite impressed when our suppliers mentioned they use MikroTik products as a...

I came down this morning to a dead internet due to not running LTE. Log has many of these errors: lte1: sent AT+ZGDCONT=5,"IP","everywhere ",0 lte1: rcvd +CME ERROR: Invalid Param and lte1: *CME ERROR: Missing SN Any ideas on those? Ah - it seems that EE "are aware of a tech...

Please excuse my ignorance as I am new to MikroTik devices. Does the LoRa device use RouterOS or would that be too verbose for it? There is a big push for such devices here in South Wales. I currently use Home Assistant for a few tasks but mainly monitoring a ground source heat pump via MQTT. Few ot...

For the SIM card not inserted error you could try to put a layer or two of scotch tape on the back of the SIM card in order to make it a little thicker. If you make the tape longer than the SIM it’ll make a nice tag for you to pull on in order to take the SIM out next time. That error seems to come...

Sorry if I have missed an obvious topic or forum but is there any advice around for changing the modem's and router's addresses so I can merge the devices in my existing network?

I have created quite a detailed plan to do so but I would like someone to check out if I have missed something.

I assumed that each band carried multiple channels and they were aggregated by some technical magic. I had a really annoying problem last night which I eventually worked out was due to my flitting back and forth using ethernet cable to talk with EE broadband router (which I think is an old version o...

... am I correct in thinking that if the SIM card was dead we would not see an imei? Since modem sees IMSI, this means it somehow cummunicates with SIM. But that doesn't mean that SIM is flawless or that SIM is correctly provisioned in MNOs data bases. So it really depends on what exactly "sup...

Ah - I wonder if my issue is similar to some others where the solution was to update the firmware. Resetting the modem and disabling and re-enabling the LTE1 interface always results in the same: [admin@MikroTik] /interface lte> info lte1 once pin-status: ok registration-status: not searching functi...

Analogy: Can I drive to Rome with that car ? Yes, you can. Can I also take the complete dining room with me ? Errm ...nope. That would require a truck. Requirements. What is needed ? What do you want to do ? How savvy are you ? I like that a lot! Just had MikroTik Sxt LTE6 and Hapac Lite installed ...