hi! With help form MT support as it turs out it can be achieved only after 7.17rc1. You should do as per instructions in help but with this twist on CAPsMAN /interface list add name=wifiliste_guest /interface bridge port add bridge=bridge interface=wifiliste_guest pvid=20 /interface wifi datapath ad...

Hi! With help from https://help.mikrotik.com/docs/spaces/ROS/pages/224559120/WiFi#WiFi-CAPsMAN-CAPVLANconfigurationexample: I did manage perfectly fine wifi-qcom-ac environment where CAPsMAN is RB4011iGS+ which has no Wifi it self. In home environment I have Chateau 5G as main router and tried to mo...

After full restart of all caps "busy" went away. All good for now.

Hi! did updated hap ax3, hap ax2 and hap ac3 from 7.13beta1 ->7.13beta3. Hap ax3 act as CAPsMAN. now i have this in capsman. /interface/wifi> print Flags: M - MASTER; D - DYNAMIC; B - BOUND; I - INACTIVE, R - RUNNING Columns: NAME, MASTER-INTERFACE # NAME MASTER-INTERFACE ;;; busy 0 MDBI 2Ghz-2a_TV1...

I am having probelm with "assocation rejected, can't find PMKSA" with CAPsMAN on ax3 16:04:11 wireless,debug 12:**:**:**:78:91@wifi1 assocation rejected, can't find PMKSA 16:04:13 wireless,debug 12:**:**:**:9E:78:91@wifi1 assocation rejected, can't find PMKSA 16:05:11 wireless,debug BE:**:...

Hi! I constantly getting "SA Query timeout" with win11 22H2 with Intel(R) Wi-Fi 6 AX201 whcih results that it goes far to anather CAP. I have CapsMan setup Hap ax3 is controler. this from log: 14:18:19 wireless,debug **:**:**:**:**:F9@wifi2 associated, signal strength -48 14:18:19 wireless...

Ok, case can be closed, thanks to MT suppoert. They did point out to read more cerefuly Quectel_EG18_Series_CA_Feature_V1.2 spec. 4x4 not works on all posible comubinatioins, more specifcaly, if you have more then 3 bands on tower, 4x4 will not work. Made tests - works according to spec.

@mkx I know that +QRSRP prints only primary, and I am for sure now that my tower have 4x4 for 1,3 and 7. And I know, that 20 do not support (or rather no one do 4x4). All my test was made on 1 , 3 and 7 as primary (by locking that with … ="at+qnwlock=\"common/4g\....) and then after separa...

Hi! My tower has 4 bands (20,1,3,7) and 1-7 beaming 4x4 MIMO. I notice, that looks like 4x4 MIMO don’t work as soon CA takes place. /interface lte at-chat lte1 input="AT+QRSRP" output: +QRSRP: -88,-93,-140,-140 if i remove CA (by forcing to use only 1 band) then 4x4 MIMO kicks and i see so...

hAP ac3 RBD53iG-5HacD2HnD with wifiwave2 still dont sport VLAN. # mar/26/2023 20:34:29 by RouterOS 7.9beta4 # software id = WYZC-DIZ1 # # model = RBD53iG-5HacD2HnD /interface/wifiwave2> print Flags: M - MASTER; B - BOUND; X, I, R - RUNNING Columns: NAME, CONFIGURATION.MODE, CONFIGURATION.SSID # NAME...

ATLGM from 7.8 -> 7.9beta went brick. Netinstall accepted only 7.8. ATLGM has APN passthrough with minimum defoult configuratin. This is it there, no FW, just passthrough, VLAN for admin and scheduler. export # mar/26/2023 19:50:17 by RouterOS 7.8 # software id = RFMG-YXHU # # model = ATLGM # serial...

LV operators (and probably not just LV) lately turning off high bands during nights to save electricity. Meantime, if you have lots of active devices: specifically IoT (e.g. cheap Chinese CCTV) which keeps constant connection to some sort of cloud services to push notification to your phone etc, the...

Unfortunately, vlan-id is supported only on 802.11ax interfaces. Documentation has been adjusted.

Is this temporary, while missing functionality will be added or it will be "Lost functionality"?
And how you suggest to set up Guest network on hap ac3 wave2 with Caps-man?

@Guntis, but how about CAPsMAN and VLAN?
On CAPsMAN therer is all good with VLAN, but on CAP VLAN is shows as not supported.
See post: viewtopic.php?t=192458#p983369

More over, at least i did not manage to get VLAN on hAP ac3 wifiwave2 managed by CAPsMAN from hAP ax3. See my previos post viewtopic.php?t=192458#p983369. Basically now i hold all my continusly impovments in my network deployment while this is sorterd out.

Hi! Ok, now did manage to get wokring CAPsMAN on hAP ax3 and hAP ac3 as CAP. As it stated then there is no CAPsMAN forwarding mode (hope it is temporary). Trying to set up with VLAN, no luck there too (see picture) . Am i doing someting wrong, or it is not suported for now? VLAN works on CAPsMAN it ...

I have flapping POE port also. hAP ax3 (C53UiG+5HPaxD2HPaxD) with 7.8beta3 powreing ATLGM (7.7) and since 7.8beta3 on hAP ax3 it tryes to negosiate 1G, then it drops donw to 100Mbps and then link down and back to 100Mbs. 07:12:02 interface,info ether1 link up (speed 1G, full duplex) 09:07:54 interfa...

Hi!
How far is wifiwave2 caps-man in 7.8beta3? Looks like datapath.local-forwarding is set YES, or rather this paramater do not exist and caps-man forwarding do not exist. Would be nice to have it soon back, manage diferent sumbnets in CAP netwokr is a hassele.

Addad hAP ac3 with WifiWave2 as CAP controled by Capsman on hAP ax3 . Still dont wokr. All i can see: on Capsman hAP ax3 /interface/wifiwave2/capsman/remote-cap> print Columns: ADDRESS, IDENTITY, STATE, BOARD-NAME, VERSION # ADDRESS IDENTITY STATE BOARD-NAME VERSION 0 MikroTik Ok RBD53iG-5HacD2HnD 7...

Hi, somhow i can not manage do capsman on hAP ax3 on its own interface. My config: # jan/20/2023 20:51:47 by RouterOS 7.8beta2 # software id = KVAM-7GMC /interface wifiwave2 # managed by CAPsMAN set [ find default-name=wifi1 ] configuration.manager=capsman-or-local .mode=ap disabled=no # managed by ...

Hello! I was so happy yestereday with finaly getting HAP ax3 in my posession and was about to deply my CAPsMAN managed network. However, did miss detailes in wifiwave2 - CAPsMAN compibility. In 7.7rc4 *) wifiwave2 - added initial CAPsMAN support (only compatible with wifiwave2 interfaces) (CLI only)...