Thanks, this is a great first release! Very happy. Works really smooth on an M1 Mac on Ventura. Don't see any lag that some others mention. Adding a +1 for tabbed interface and increase in contrast (incl. colourful icons that were easier to distinguish one from another) of course - but pleased that ...

Hi. Wonder if this is possible - I have one thunderbolt dock with one NIC/MAC address and I'd like to set my MikroTik router to behave so that if a specific laptop is plugged in (i.e. my work laptop), it gets connected to my guest VLAN interface (pvid 20), but for any other devices plugged into that...

Thanks @mkx and @fragtion for your responses back in April. I did not dare reboot at the time as I was not physically near the router to be able to troubleshoot if something went wrong. Very fortunate there has been no power outage for 170+ days in a row! So, sitting next to the router a few days ba...

[admin@Mikrotik-MS] /system/resource> print uptime: 15w4d14h11m30s version: 7.13 (stable) build-time: Dec/14/2023 09:24:08 factory-software: 6.44 free-memory: 29.2MiB total-memory: 128.0MiB cpu: ARM cpu-count: 4 cpu-frequency: 896MHz cpu-load: 2% free-hdd-space: 0 total-hdd-space: 15.2MiB write-sec...

It's strange indeed. The only thing I can think of is that this may be a strange software bug in 7.10.1? I will give it a couple of months and then try again on a future version down the line. For now, I'll keep this as is as everything works as it should and it's stable.

The PPPoE connection drops as soon as I remove the orange pvid (i.e. change it to '1' using winbox - which I believe is the default here).

Thanks for this review as well as for new config lines and explanations. I was able to make changes under b. and c. Curiously enough, the IPTV, which requires VLAN3999, was running just fine on ETH3 before as well when pvid was set to 10. Anyway, making changes under a. breaks my PPPoE connection. T...

Again for me to comment and happy to do so, would need to see your latest config, so I am working from truth and not memory etc... Sure, this is my current config. As mentioned, this works exactly as expected: /interface bridge add igmp-snooping=yes multicast-router=permanent name=bridge-master vla...

Strangest thing - so whilst still on my initial config, but with your firewall and dst-nat rules from your first response, I decided to try a different wireguard client (a wired windows pc in another location) to see if this glacial wireguard speed is there as well....and, well, it's not . I get ful...

One question, why set igmp-snooping and multicast=permanent on the LAN bridge ?? This was there on my original master-bridge set up where LAN and IPTV vlans were part of the same bridge so I think I kept it as a result - probably not needed on the LAN-only bridge. In any case, it doesn't seem to ma...

The error I see in your config is this /interface vlan add interface =bridge-master name=Vlan20-PPPoE vlan-id=20 The pppoe connection has nothing to do with the bridge. YOu need to assign the vlan to ether1, the port connected to the ISP. Thanks, however, this didn't work either: /interface vlan ad...

Thanks Anav. I tried both these options and in both cases PPPoE doesn't connect. See below for the config without vlan10. Once I reverted to my initial config, PPPoE came straight back up. Not sure why PPPoE isn't connecting - any ideas? I tried putting PPPoE Client directly on port ether1, however,...

Thanks, I will try this in the morning. 2 questions: Under /interface vlan, may I just ask what is the point of tagging interface=ether1 with vlan-id=20 if we then never use this id anywhere? In addition, if I don't use vlan-id=10 anywhere in my home network, can that be removed as well to simplify ...

Thanks! Where is vlan 3399 coming from, is it part of the ppoe traffic or something separate??? Not sure I understand this question - my ISP requires vlan tag of 3999 on the Eth port that is connected to the IPTV box (in my case ETH3) in order to get IPTV signal if that helps? I'm happy to try a dif...

Thanks anav for your reply, appreciate it! To answer your questions: (1), (3), (4) - I lose PPPoE connectivity by doing these steps - the PPPoE session drops as soon as I make the change under (1). I have therefore reverted this to my current config until we figure out a better way (see next point)?...

Hi all, I was wondering if someone could help me out a bit here. This is on a freshly netinstalled RoS v7.10.1 on HAP AC2 running 3 VLANs (10,20,3999 [=used for IPTV]) with HW offloading, which are all on one bridge interface (master-bridge). I just can't seem to get the dst-nat rules to work to and...

Can someone compare hAP ac2 & hAP ax2 in terms of coverage zone (bigger, smaller, same) and speed at the coverage zone edges? Thanks. First impression of the coverage are pretty good. At the far end of the flat, this seems to be around on par with Ubiquiti AC Lite (Wifi 5), if not bit better, a...

Mine is out for delivery tomorrow and my main goal is to see if it can replace hAP ac2 + Ubiquiti AC Lite, which I had to purchase as ac2 did not reach my office room.

Will post back!