MikroTik

telecomnetwork2022

Thank i founded best solution for this

here https://www.youtube.com/watch?v=x8FWlndp_TI

at 8:20

telecomnetwork2022

i dont want use netwatch i am working on terminal if you can help me how can check the line using command But if you don't specify anything, for example what routerboard it is, what software is there, what are these 3 lines, etc., what answers do you hope to get? The question is clear and does not ...

telecomnetwork2022

Mine sends a telegram message if interface is down or up........ helpful answer :) OP if you are interested in setting a telegram bot up you can find more information from one of Mikrotiks newer YouTube videos, https://www.youtube.com/watch?v=KLX6j3sLRIE My suggestion for this is to check out the n...

telecomnetwork2022

I have 3 lines in my RB with load balance

Eg How can i check if line 2 have internet or no by command or terminal

i need make script to check evrey eg 30 min if the line have the internet or no

If dont have eg send me email to gmail

telecomnetwork2022

Hmmmmmmmmmmmm

telecomnetwork2022

i have 2 wan with load balance
i cant ping in wan 2 (show me time out)

ping 8.8.8.8 interface=ether1=ping ok

ping 8.8.8.8 interface=ether2=time out ??

telecomnetwork2022

https://wiki.mikrotik.com/wiki/Manual:Queues_-_Burst

Can you help me to write rule for this solution

telecomnetwork2022

i am run on PPPOE for all customers
Can We Make Queues To give all customers 30MB connections speed but when any customers use full bandwidth 30MB continuous for 5 Minutes drop speed to 16MB

i think is best solution to make conniction stable and reliable

telecomnetwork2022

Some websites don’t accept bypasses

telecomnetwork2022

what are you trying to achieve

limit bandwidth for tiktok and twitch (sorted in address list)

just need acorrect rules mark connections and packet and queues rule

telecomnetwork2022

You have 2 things wrong. first you are using mark routing not mark connection second in queue you didn't specify a target which means the target is everything means upload and download are going from the same place in the queue so make sure to put the target the same as src address in your rules i ...

telecomnetwork2022

Then show Your queue and firewall mangle. There is no Rules in firewall mangle just mark connection and mark packet for my adress list /ip firewall mangle add action=mark-routing chain=prerouting dst-address-list=tiktok \ new-routing-mark=speed_connections passthrough=yes src-address=\ 192.168.88.0...

telecomnetwork2022

Disable fasttrack in firewall.

fasttrack = OFF

telecomnetwork2022

Queues It only works with browsing speed, not with download speed

when make speedtest or download file there is no limitation

i am trying to limit bandwidth in my Address list using Queues and Packet (Mark Connection and MArk Packet) but i got unlimithed bandwidth ?

fasttrack = OFF

telecomnetwork2022

I'm using simple queues (which work pretty straight forward). Might be sufficient for you as well? /queue simple add dst=[WAN interface] max-limit=100M/100M name=[ANYNAMEYOULIKE] target=[IP ADDRESS] i trying to limit some websits traffice sorted in address list in firewall but i cant fin where is t...

telecomnetwork2022

Queues Not Working ?

telecomnetwork2022

Thank for your tips

telecomnetwork2022

# jan/15/2023 12:44:04 by RouterOS 6.49.7 # software id = # # model = RB4011iGS+ # serial number = /interface bridge add admin-mac=DC::34:C8:17 auto-mac=no comment=defconf name=bridge /interface ethernet switch port set 0 default-vlan-id=0 set 1 default-vlan-id=0 set 2 default-vlan-id=0 set 3 defau...

telecomnetwork2022

RB4011IGS V6.49 LAST STABLE
Fasttrack = OFF

i am trying to limit bandwidth in my Address list using Queues and Packet (Mark Connection and MArk Packet) but i got unlimithed bandwidth ?

telecomnetwork2022

https://mikrotik.com/consultants
https://mikrotik.com/training/

Your users deserve a network administrator.

great question thank you

telecomnetwork2022

its RB4011IGS good to test
can anyone explain how i can meter pppoe connection ?

telecomnetwork2022

so i dont need visit some my costomers to make speedtest

is there any method to meter PPPoE connection speed from Mikrotik

telecomnetwork2022

ihave traffice 64M in bridge as ypu can see
But the totoal traffice = 46M ?

also that

bridge 27M in out Just 20 ? and somntimes the opposite out 30 and bridge 21

telecomnetwork2022

wich the correct answer??

telecomnetwork2022

thats wrong bro
66% = 1/3->1 2/3->1 3/3->2

So good

why is 3/1 3/2 3/3
why not 3/0 3/1 3/2

can you help me to write the addistional rule i need

telecomnetwork2022

So we have 2 line wan 1= 200M wan 2=50MB Traffic = 50% from wan1 and 50% from Wan2 Need Edit Rule to set load balance 70% from Wan 1 and 30 Form Wan 2 THANK Current config add action=mark-connection chain=prerouting dst-address-type=!local \ new-connection-mark=WAN_CON_1 passthrough=yes per-connecti...

telecomnetwork2022

CAN YOU SEE THIS VIDEO ?
https://youtu.be/XuTuIonXsns

telecomnetwork2022

My config Wan 1= 100MB Wan 2 = 50MB # model = RB4011iGS+ # serial number = /interface bridge add admin-mac=D:C8:17 auto-mac=no comment=defconf name=bridge /interface ethernet switch port set 0 default-vlan-id=0 set 1 default-vlan-id=0 set 2 default-vlan-id=0 set 3 default-vlan-id=0 set 4 default-vla...

telecomnetwork2022

Thank for everybody What matters is that my issue has been resolved We don't think so. Either you had no issue at all, or it has not been (completely) resolved. Because that is impossible. Can you Explaine me what the different between pcc load balance Firewall Mangle Rule and the Rule i use to Rer...

telecomnetwork2022

No. The way TCP works (TLS is no exception) is this: client sends TCP packet without payload, only meaningful thing is SYN flag server sends reply without any payload. The only meaningful thing are SYN+ACK flags client sends anotger packet. Most often is again without payload, only ACK flag. Someti...

telecomnetwork2022

need manual for ecmp [edit] load balance if you can I'd start with the differences between PCC ,ECMP, etc here (e.g. packet vs session): https://help.mikrotik.com/docs/display/ROS/Load+Balancing Unforentently Mikrotik's docs do leave you hanging with ECMP. But it quite easy. In V7, an ECMP route is...

telecomnetwork2022

oH ? Are you mean the server can route just one connection in same time ? No, what I mean is: when loadbalancing has initiated a connection via ISP #2 and you detect that using your TLS host rule, it is too late to reroute that to ISP #1. Depending on how you do the rerouting, the connection will e...

telecomnetwork2022

Just Write *ampr* in TSL host and the rule will automaticly add all ips and domain to the new list That will not work because this server does not use TLS. Furthermore, it would be unwarranted because the ampr.org domain contains many services and only a few speedtest servers. It also is not clear ...

telecomnetwork2022

it is impossible to know in advance all the names and all the IPs of the dozens of thousands of speedtests that exist. ...and the lists are constantly changing, the same site can very well have different IPs for each test done. Ok, you don't like to get the point, I don't like to answer this again....

telecomnetwork2022

no connection will not broken just he go to another isp in mikrotik are thats right I do not want go on details, but, for example, simply the payment platform want the same IP, if one of called subdomains or domain with other names is reached with the other IP, for security reason can not be comple...

telecomnetwork2022

If the queue is full, the ping is dropped or delayed, so what's weird? You haven't even specified what hardware and software you're talking about. Could also be a RB133C3 With RouterOS 4.16 the weird is i have traffic 150MB and the queue is not full Hardware RB4011IGS CPU 0% need manual for ecmb lo...

telecomnetwork2022

@telecomnetwork2022 : @pe1chl is absolutely right, and it is perfectly useless to contradict him, it is impossible to know in advance all the names and all the IPs of the dozens of thousands of speedtests that exist. Just for example, not all speedtest have speed and test on name: speedsmart . net ...

telecomnetwork2022

look in #11 and #2

telecomnetwork2022

How does your solution work when you go to http://44.137.42.33/ ??
Or even when you go to http://speedtest.pi9noz.ampr.org/ which is the DNS name of that address?

Just Write *ampr* in TSL host and the rule will automaticly add all ips and domain to the new list

telecomnetwork2022

Nothing impossible in mikrotik the problem sloved solution : replace youtube for any website or ip want Yes, THAT is not a problem. The problem is to make this work "for any speedtest" as you originally asked! You cannot know the IP and not even the DNS name of every speedtest in advance....

telecomnetwork2022

My point is no one knows without at least some config to see what's actually going on & might be more attention here. For example, if you're also using queues, etc. that also be a related to your ping problem, etc. At a high level, I'd personally approach this using ECMP instead of PCC first, b...

telecomnetwork2022

Nothing impossible in mikrotik the problem sloved solution : replace youtube for any website or ip want https://i.ibb.co/NnzmtDg/a4e0c3c1-0d1c-4f9b-9bee-eee36c8c1e07.jpg https://i.ibb.co/P61gv13/60f47c5f-54d5-4072-be80-51f4f40c2a23.jpg https://i.ibb.co/w7XddV5/19aede64-f3ad-4290-a953-2bf9c97c8eb2.jp...

telecomnetwork2022

It's either increased CPU or the config. Hard to know.

- TOP CPU LOAD 0-2%
- what the correct configration for loadbalance 2 wan 1 =100mb 2= 50mb in PCC method

telecomnetwork2022

Hello brothers before pcc load balance Ping 10 to 30 TOP Jitter 1 to 15 after pcc load balance Ping 10 to 200 TOP Jitter 20 to 70 i tried to change PCC to NTH same issues + ping in 2 wan stable + fasttrack disable + no firewall rule just managle rule + i am using pppoe server for connection client u...

telecomnetwork2022

It is not possible to make rules for someone else's router when they have not posted an export of their current configuration.

nothing possible in mikrotik

telecomnetwork2022

You can set DST port 8080 but this will work only with speedtest.net, all servers or OOKLA use port 8080.

I Have Adress List contain a website and his IP can you help me to make rule send any connection for this site from client to wan2 not wan 1

telecomnetwork2022

so i have 2 wan with load balance

when make speedtest show me WAN1 ISP Providor Name sometimes show me WAN2 ISP Providor Name

Can i set any speedtest connection to WAN1 ?

telecomnetwork2022

i found this buts i think too old its not working for me

https://jarkom.net/mengubah-ip-publik-d ... unakan-vpn

telecomnetwork2022

i have

telecomnetwork2022

Thanks You alot

the proplem sloved

ISSUES : in the firewall managle rule of load balance in dst adress i just replace router ip 192.168.88.0/24 to the PPPOE IP POOL 192.168.200.0/24 and after that i got full speed

telecomnetwork2022

Hello Evreyone i have RB4011
ihave 150MB speed

Issues : when i connect the internet throw pppoe connectiuon i got 80-90 just ??
when i cponnect direct i got 150 ?

Fasttrack=Disable
MTU=1492
Firewall Rule = 0

Search found 51 matches