Hi m8's! I'm using ospf in my network and pppoe with radius authentication. Now I need to use a RB411 with 3 pppoe users. It works well till one pppoe session is initiated. after the second client trying to connect from the same RB411 the first session stops working (ping timeout), and then they alt...

it doesn't work for me. what should i have to set in the firewall filter? the nat config is: chain=dstnat dst-address="public ip addr" action=dst-nat to-addresses=192.168.0.100 to-ports=0-65535 chain=srcnat src-address=192.168.0.100 action=src-nat to-addresses="public ip addr" to...

Hello M8's!

How should I assign a public ip to an internal? I've tried the example from the manual, but it doesn't work for me. I'm using ver.2.9.28 on RB532.

Thanx

thnx normis

hi m8s!

i'd like to use a script, which pings an address continiously, and if the value rises over 150ms it sends an email automatically to a specified address.

Help me please!

thnx in advance

b.r.

so. i have a wrap.2c with cm9 wlan card. mt 2.9.6. the clients are PC6860 pci cards and one wx-7800a sparklan in client mode. the ap is at 5ghz. there are 3 pci clients and the sparklan. if the spark is connected, one of the client can connect but the others no. when the spark is off, all clients ca...

hi m8's!

What could be the problem, if i receive always "class 3 frame received"? What does it mean!?

thnx

Hi M8's!

I've tried to backup my config in 2.9.14, and it makes a strange thing. The file size grows up till the disk is full, and the cpu load is 100%. You can't stop the backup process, just with a reboot. I'm using RB532. Maybe the x86 version doesn't have this bug.

BR.

Where are you located (just out of curiosity)?

Best regards,
Christian Meis

HU. we're ISP.

thank you very much.

i have to log it because of laws!

Hi!

I have to log all NAT activities (ip to ip, ports, etc.). How should i set it, because i already have tried all log settings, but i didnt find the good one.

Thanx

Which wireless legacy pack do you use!?

it's already disabled. i'm using 2.9.11. but i had same problems before.
cables are ok, just checked 2 days ago.

Hi M8's! I've 2 APs in a RB532. Sometimes the users have extremely high pings, while they are pinging the AP. I have firewall filters with a lot of ports denied (same like the demo2.mt.lv mikrotik). What should I do? Which other ports should i disable? Local traffic is already disabled, and also por...

hi m8s!

i'd like to make the following config. one pc with 3wlan cards. 2 of them should work as AP, and one in brigde mode. (AP+BACKBONE) http://www.mikrotik.com/3index.php#bckb

how should i configure them for good routing?


thanks in advance.