I'm looking for what kind of L2 tunnel over the Internet would work best: - need to pass a few VLANs - need to pass RFC4638 PPPoE inside VLAN, this means L2MTU at least 1526 (MTU 1500 + PPPoE 8 + VLAN 4 + Ethernet 14) - client is behind any kind of broken NAT (could even be double NAT: CGNAT at the...

I Tested this and it works fine, but the issue is that it seems to work better from Mikrotik to Mikrotik. My test to a cisco 9K failed Greetings, could you share the meaning of the parameters, please? Mikrotik is really failing in Documentation. As far as I see, other brands already established in ...

do you still require assistance ?
I have managed to estabilish a L2tpv3 tunnel between to Mikrotiks

I Tested this and it works fine, but the issue is that it seems to work better from Mikrotik to Mikrotik.
My test to a cisco 9K failed

Hi All I want to find out if the is a way were i can automatically add about 300 to 400 routes which I am learning via a BGP Peer into a address list ? I have Mikrotik as a CPE/CE connecting and receiving routes from a PE via BGP, then these routes are put in there own routing table. Now I want the ...

Hi I need to know to do a nat bypass for my management IP so I can access it via my management vlan. I have a PPPoE with a public ip 41.160.X.69 and then applied a Nat for the Lan. then I have a managemet vlan 50 with an IP address of 10.100.2.69/24 associated to a bridge. my issue is that the CE ca...

Hi All I have a question around management IP address not been reached from the WAN port. I have mikrotik using PPPoE for Internet access and a management vlan 100, which is in a bridge and that vlan is participating in that bridge. I can access the device via the PPPoE public ip address, no problem...