Hi! I have a CRS-112-8G-4S-IN and i trying communicate with a network using a SFP model: Planet MFB-F20. This SFP is Fast Ethernet. The switch recognize the SFP port. First, i uncheck the auto-negotiation option and select 100mbps speed, and the sfp port goes to running status. But i can't ping any ...

Hi! I have a starlink kit gen 2 with network adapter. The starlink router is not configured in bridge (bypass). I configured a dhcp-client in interface that's connected with starlink's network adapter. The internet works ok. But, about a day later, the internet in mikrotik stops working. In dhcp-cli...

Hi! I have a CSS106 connected to a CRS112 through sfp port. The SFP is connected, but the equipments connected in CSS106 doesn't get IP. The CRS112 is working normally, givin address ip correctly. The SFP port is in bridge. The CSS106 appears in Neighbors with default IP. The CSS106 is configured wi...

Hi! I have a network 192.168.0.0/24 and i created a dhcp server with pool 192.168.0.20-192.168.0.250 But, i want to set specific IP for example 192.168.0.6 to specific MAC. First, i go in dhcp-> leases and set make static in specific device (for example this device get 192.168.0.21). When i change i...

I found something.

If i change "masquerade srcnat" rule, keeping the option "out-interface-list" empty, the internet works.
if a put "out-interface-list" with WAN, which is a list with two link input ports, the internet stops.

What i'm doing wrong?

Dont understand the purpose of vlan20 ? Starlink doesnt use vlans?? The use of the vlan has no relation to starlink. A few devices need to have another IP range (described there in IP -> Address), so that third parties can read data from these devices through VPN. I tried disabling this vlan to see...

I attached my .rsc file.

Hi! I have a mikrotik with 2 WAN Links. Link 1 is ISP with PPOE and Link 2 is Starlink (works with DHCP Client). Inside mikrotik i have normal internet access, but the devices connected in bridge can't navigate internet, i believe it's a DNS problem. The computers get correct IP from Mikrotik (DHCP ...

Hi! I have a failover link with pppoe from ISP1 as main connection and starlink with backup. I implemented failover using distances at default routes. But sometimes the ISP fails at specific mode. I don't have internet access, but the ppoe remains connected and ppoe default route remais reacheable, ...

Exists other UDP connections in my server. I have another openvpn server (in another port) works in UDP for windows clients.

I simulate this situation in eve-ng and i have same errors. I attached my .rsc file

The PFSense (openvpn server) get fixed public IP from ISP. And the mikrotik (ovpn client) get internet from Starlink, that is, behind CGNAT.

Hi! I try to test a openvpn connection in udp between pfsense (2.6) and mikrotik (7.10). Using TCP the connection works like a charm (the mikrotik is ovpn client). But when i try udp connection, the log in mikrotik shows: ovpn-cor: disconnected <TLS error: handshake timed out (6)> In the pfsense sid...

Hi! I have this network topology: arch.png My intention is that the devices on network in Mikrotik 2 see the DVC1, for example and vice-versa The phase 2 configuration on pfsense side Local Network: 172.25.148.0/24 Remote Network: 192.168.15.0/24 I can see the DVC1 through all devices in PFSense LAN...

Hi! I have this network topology: arch.png My intention is that the devices on network of Mikrotik 2 see the DVC1, and vice-versa. I need the pfsense act as túnnel between two networks. The túnnel IPSEC between pfsense and Mikrotik 2 is (configured in Pfsense): Phase 2: Local Network: 172.25.148.0/2...