Hello We are using several RB1100 (v5.24) and ethernet ports are flapping from 100 M to 10 M . Very rare to get 1 G We changed connectors and cable (now we have Ubiquiti special cable and connectors) At the radio RBs we have RB435 (giving a lot of problems) and changing to RB 433GL. We use a separat...

Hello We are using several RB1100 (v5.24) and ethernet ports are flapping from 100 M to 10 M . Very rare to get 1 G We changed connectors and cable (now we have Ubiquiti special cable and connectors) At the radio RBs we have RB435 (giving a lot of problems) and changing to RB 433GL. We use a separat...

Hello,
i am trying to use CCR (both 16 and 36 cores)

PPTP not working. Any ideas?

This

Hi Normis, Thank you for your prompt reply. I know it is too strong. We have 17 links with levels ranging from -40 to -70 The problem is that with v3.30 i don't have those unstable connections like teh ones with V4.9 Something is wrong with that software because we are also having BGP problems: peer...

Hi All, We were using v3.30, but having some problems with hotspot after login browser refresh. We decided to upgarde to V4.9 because we didn't saw any big problems at the forum... But we are having huge problems: 1 - link are disconnecting , even with -40 or -50 signal 2 - we now have, working same...

Hi James, put your public Ip on ether 1 of C1 U need to know gateway (PGW) and dns server(PDNS) from your public IP At C1 the gateway will be your PGW and DNS the PDNS (at /ip/dns dont forget to click on "allow remote requests". on /Ip/firewall/nat put a rule srcnat action masquerade. befo...

Hi James, I didnt understood very well the public Ip side. Always remember that each SIDE of a connection must have an IP of the same network (unless u use pppoe or other L2 ). So , your ether of C1 MUST be on the same network. If the public Ip is delivery at C1 Ethernet than u dont need de 172.30.1...

HI, Where is the public Ip? in a PC or a modem that has an interface towards your network that you can change ... Because u need to have an IP of ether1. u can use a classe C like 172.30.1.0/24 to do all and still save some IPs starting the PC with public Ip. Must be 172.30.1.1/30 that connects to y...

Hi Guys, I'm trying to implement a gateway failover on RC13. I've tried the "examples" of wiki ( I dont understand whats the point of having examples with syntax errors and after correction still not doing the job). I have two ( and I will have 4) different ADSL lines. When the one being u...

Hi Sergejs,

It has 5GHz with some countries. When I choose Brasil and some others the all 5Ghz is not allowed. It was on 2.9...

Thks

Hi,

I just install a Rb 333 with V3rc11 and I don't get the 5GHz Band if I select country Brazil.

Can anyone confirm this?
Thanks