i use wireless link as backup to fiber onu link.RF STATION lan side is disabled and only enabled if fiber link to onu is down and disabled again before fiber link is restored.can i replace L1 switch with mikrotik switch with a script in routeros that ether 1 will ping to 192.168.1.1 if ping is succe...

finaly romoved netbox5 ax and installed mimosa C5c devices now stable signal -59 distance is 25km and bandwidth is around 500 mbps.

is it possible to write a script in routeros that ether 1 will ping to 192.168.1.1 if ping is successful ether 2 will be disabled if ping fails then only ether 2 will be enabled if ether 1 succeeds to ping 192.168.1.1 then ether 2 disables again ether 3 will be lan port and all 3 will be in bridge m...

hi I am experiencing low bandwidth issue with my MikroTik NetBox5 AX pair, which is paired with MANT30 antennas. Despite using 80 MHz and 160 MHz channel widths, I am only achieving bandwidths of 400 to 450 Mbps on 80mhz and 400 Mbps on 160mhz, respectively, within a single room. This performance is...

HI
I am completely new to mikrotik wireless systems. i have purchased pair of netbox 5ax with mant30.can someone please explain how to configure netbox 5ax for long range p2p link approx 16 km.my country is india can i use 160mhz channel width.any help is highly appriciated.

hi i am running mikrotik ccr1036 on routeros 6.49.8 with 1000 pppoe connections they are connected with 5 olts i am getting following error PPPoE connection from mac id was already active - closing previous one and my mikrotik dose not work interface stops updating only option is to reboot the mikro...