I already done this but no response

rpki-verify RPKI is not working and must be a bug in the firmware. Can someone please check?

the issue is, none of the routes are getting marked

We have RPKI setup to filter BGP routes received from providers, however they do not seem to be getting filtered. We have inbound filters setup rpki-verify RPKI if (rpki invalid) { reject } else { accept } under the same chain name as other working inbound filters and are on the latest OS. to check ...

Yes, all is working ok now. I adjusted the BGP filter to include set pref-src <IP-Address> of the IP that is being announced to both providers and now the router can connect to DNS and other services ok. without set pref-src set, it was using a Provider 1 IP address to try and connect to a remote pe...

found the solution.

Setup a BGP inbound rule to set ;set pref-src to the IP of the router /24 prefix and now the router can see the internet ok.

We have two Upstream providers both with IPv4 and IPv6 (BGP) all is working well on devices on the lan and can reach the internet ok. the issue is the mikrotik itself. For example, I cannot get OS Updates. complains about not able to reach DNS. I done some testing and i suspect the Wan IP address is...

Hi, I'm running a small home network using a CCR1009-7G-1C-1S+ Router 2 x 1Gb External Fibre Access 3 x BGP IPv4 Peers (two of which via a GRE tunnel) 3 x BGP IPv6 Peers (two of which via a GRE tunnel) All are sending me a full Table. I'm announcing two IPv4 /24 and a 1 x /IPv6 via my Public AS Numb...