Thanks for the info, found the built in variable problematic so here is my working script just just manually fetches valuesif anyone needs it. Note:if the ipv6 address already exists in firewall address list "prefix_delegation" the script will bomb out that's why this command must be last ...

Have a script I'm trying to get working with the star link config above so the ipv6 firewall will only allow the ipv6 dhcp client server to send through prefix delegation data by switching on a firewall rule that allows any address until the dhcpv6 client is bound then it puts that address in a list...

Thanks, updated the above post to reflect this and tested and verified it's good, always like to use best practice where possible.

Thanks I see, here is my full ipv6 starlink working config below using multiple subnets, really liking this routeros only been using for a few days, no faffing with vlans ect for subnets fantastic. /ipv6 address add address=::1 from-pool=pool6 interface=ether5 add address=::1 from-pool=pool6 interfa...

This post has been invaluable to get ipv6 working with Starlink, but I found the option to use add advertise-dns=no interface=<WAN> ra-lifetime=none ra-preference=low reachable-time=5m instead of assigning it to each of my subnets or interfaces like I have below would only work for my lan and none o...