MikroTik

orfeous

A switch doesn't use it's CPU if configured correctly. CRS112 is a bit tricky to configure. Any misstake and the traffic will end up in the CPU. A L009 has a decent switch as well, and is easier to use, but lacks QoS features. I've run a number of PCM 48k RTP Audio streams over my CRS112 with QoS a...

orfeous

It might work, but if this is for a recording setup and Dante is sharing the network with other bulk traffic, I’d say QoS is essential to maintain audio quality. Dante is pretty sensitive to latency and jitter, so QoS makes sure that Dante streams are prioritized over other types of network traffic...

orfeous

On 1G links, Dante does not require QoS. That is, until you don´t have other traffic competing with the streams. So you can also use any SWOS device with 1G ports, but don´t send Dante over 1G Trunks between switches without QoS. Thank you! I'm aware of SwOS. Current using Dante on Vlan with SwOS b...

orfeous

@orfeous, Starting from ROS v7.15, all Mikrotik QoS-capable switches can use Dante. For more info on switches supporting Dante, check out these links: Mikrotik help - Bridging and Switching - MikroTik QoS-Capable devices ("QoS Device Support") Mikrotik help - Bridging and Switching - Appl...

orfeous

How slow is slow in regards to the CRS112? Mine is doing VLAN @wirespeed. I hadn't heard of Dante befor, doesn't seem to be any specific about it: https://en.wikipedia.org/wiki/Dante_(networking) If you still have the CRS112, make sure you configure it properly: https://help.mikrotik.com/docs/space...

orfeous

Looking for a smaller switch like up to 8 ports or something who has a powerful cpu and switchchip to be able to hande Dante traffic on RouterOS I was thinking of only have the switch for Dante traffic. So no other data on it. Just a standalone. I kinda wish that there was a smaller switch with PoE ...

orfeous

Thank you for all hints and tips. I see, by using one bridge you can utilize the hardware offloading. Using two or more bridges disables that So, for an example. Switch with 16 ports, Port 1-8 Dante ports on vlan 123 and Port 9-16 on vlan 456, where port 16 also is an uplink port to the site switch ...

orfeous

Time has passed and RouterOS has been developing. Now 7.15 and newer supports DSCP QoS prioritization etc. I've been reading the documentation for that and the guide is based on that you have the switch default configured with all ports switched in a bridge. https://help.mikrotik.com/docs/spaces/ROS...

orfeous

Okey, thank you! How secure/insecure is it to use this? Are there any ways you can secure SNMP when using SwOS? For CRS switches and such i know you can add specific users and restrict rights etc for a specific snmp user, only for specific MAC addresses, ipnumbers/subnets.. etc. I know SNMP can be a...

orfeous

2.5G RJ5 SFP does not exist on MikroTiks hardware site. S+RJ10 does not work with auto negotiation off and forced 2.5G speed in L009 SFP port. I’ve tried and this router did not like it. The result was that link kept connecting and disconnecting.. in a loop. Without anything connected. No changes wh...

orfeous

The documentation has an outdated table with tested MicroSD cards. What are the tested and/or recommended cards? I know the industrial ones are highly recommended but quite expensive even the smaller ones. How big cards do you need? My plan is to only monitor like 4-5 Mikrotik routers/switches in a ...

orfeous

Looking for a 2.5gig SFP for my new L009 router. I can only find 10gig and 1gig. The rj10 will produce too much heat for a 2.5gig fixed speed In the documentation for the router it says that 2.5gig SFPs has been tested. So i wonder.. what are those? Or do i have to buy a 3rd party brand? My goal is ...

orfeous

I like it!

orfeous

According to https://help.mikrotik.com/docs/display/ROS/MikroTik+wired+interface+compatibility#MikroTikwiredinterfacecompatibility-10GSFP+/25GSFP28 It states that CSS610 and CRS310 support S+RJ10 modules. But it doesn't say if I can populate both SFP+ ports or just one of them. For CRS305 I can use ...

orfeous

[quote=gabxav post_id=1040873 time=1702061499 user_id=225629] guys, is SWOS really dead? is there an update coming? there are many devices that don't have the option to switch to routeros, putting in a fan control, cable test, a decent login screen, would help a lot [/quote] There is a couple of new...

orfeous

[quote=kei post_id=1065956 time=1711451630 user_id=239761] I have now further investigated this topic increasing the loglevel on the FreeBSD side. There is a clear pattern which seems to point toward a problem at the MikroTik end. Looking at the lacpdu transmits, there two cycles can be observed. Th...

orfeous

Can i use the backup configuration on Switch B from Switch A?
They are both the same model and running same version of SwOS.

orfeous

[quote=chg123 post_id=1077576 time=1716905773 user_id=79934] [quote=jarenhavell post_id=1075177 time=1715709929 user_id=242128] I opened a ticket for the same issue. Support responded within 12 hours with a link to download a beta version of SwOs firmware 2.17. They said it would be released publica...

orfeous

What info can be pulled on CSS-devices with SwOS?

orfeous

I ordered some heat sinks (rasperry pi size) that should work on my sfp cages, the kit also comes with flat copper plates (small size). I dont dare open up the CCR1009 for fear of breaking warranty much less cut out a section of the lid to attach a fan to suck out the heat LOL. But I do wonder if i...

orfeous

Here is my workaround solution. Temperature now managed around 50C degrees. @vbelousov Did you use adhesive thermal tape or how did you mount the heatsinks? From what temperature did you start without heatsinks and what was the final temperature with heatsinks? Did you add any fan or something afte...

orfeous

[quote=vbelousov post_id=661541 time=1526253495 user_id=118322] Sure, got it on Amazon, here is the link: https://www.amazon.com/gp/product/B077VM8FJW/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 What kind of FLIR did you use? [/quote] Thank you for the url. It looks from the picture you've poste...

orfeous

I would like to know this aswell.
RB5009 does not support QoS.
RB5009 can only do Queues. Limiting traffic speed and such

You need the CRS series for that.

orfeous

I understand. Ita only for switching with few ports. No need for more. It's for learning and use of 1/2.5/10gbit ports for various pc machines. Some will be multicast machine image deployment and some will be AVoIP testing and some just testing. So I figured CRS310 would be great for that except not...

orfeous

How do i configure the switch for this minimum requirements? Devices are connected with gigabit on ether1 and ether4 My PC as management on ether6 The two devices can be isolated from my PC as long as i can see them in winbox. The two devices are communicating with each other. VLAN are supported on ...

orfeous

I use Telenor for IP-TV, but in my case they might use VLAN since the IP-TV box gets an ip 10.x.x.x If i connect a pc to either of the IP-TV port and use dhcp client the pc gets a 10.x.x.x address as well. If there are any VLAN then i dont know about any ID. No one semms to wanna tell. Telenor or IS...

orfeous

SwOS Lite or SwOS or both? I guess the CSS is a no go then..
I will stick to the CRS310

orfeous

Yeah they get really hot.
I've read that they need to be set at a fixed speed.

Can you try this on RouterOS also if you have CRS somewhere?

orfeous

I was thinking of ordering two switches. CSS610-8P-2S+IN and CRS310-8G+2S+IN My plan is connect them together via a 1m DAC cable on one of their SFP+ ports. I want the CSS610 switch as a complement to the CRS310. Mostly because of PoE+ and also the easy SwOS Lite. Since there are no small CRS with P...

orfeous

For CSS and CRS switches, do they support DHPC Option 66 and 67 to be used for booting via PXE on a server? Defining the switch as DHCP server with those options. Instead of using DHCP Server on the server. I thought that it might be better to use it on the switch? With VLANs etc.. Do SwOS Lite supp...

orfeous

IGMP version 3 might be required..
IGMP-Proxy can be used as well.
There should be a IGMP Querier aswell..

I do not know any details or deeper about this. The info are just some ive jumped on to.

orfeous

[quote=holvoetn post_id=1061562 time=1709846844 user_id=185526]
Final ordeal:
it's (again) S-RJ10 acting up. It can not be controlled to set lower speed.
[/quote]

Which revision of S-RJ10 are you using? There is a Rev 2
Read about it

orfeous

One issue is that the provided CTS switch are configured with all kinds of VLANs that I dont know what their are. Ive seen on sweclockers about VLANID 46 for Telenor but I have not tested it. Yeah, I've read about port mirroring and such aswell of course :) But I don't know how that could help with ...

orfeous

Just got a RB5009 PoE router and i want to configure it so my IPTV works. I dont know how. My TV/ISP provided me with a CTS-HES-3106SFP-PLUS-DR switch configured somehow and labeled with WAN, Internet and two ports with Broadband TV For IP-TV to work i need to connect internet from my wall outlet to...

orfeous

Ah, i really dont know then :)

orfeous

You might have heating issues when using two S+RJ10 next to each other. They should not be placed like that.
There must be one empty between them. Or place one on each group of ports.

Please read more about this in the S+RJ10 documentation.

orfeous

Did you solve this issue?
If you did, what was the solution?

orfeous

How do i configure the swtiches with DSCP for Dante? The issue is high latency on the audio. So theres some audible glitches/cracks/sparkles when using the audio. Switches running RouterOS v6.49.9 long-term.. Here is a link for the information about Dante and Switches. https://focusrite.com/articles...

orfeous

Behind the big heatsink there is a header that says FAN in and has three holes. Cant that be utilized?

Search found 39 matches

Re: Danteswitch

Re: Danteswitch

Re: Danteswitch

Re: Danteswitch

Re: Danteswitch

Danteswitch

Re: CRS326, CRS312, How do i setup DSCP for use with Dante?

Re: CRS326, CRS312, How do i setup DSCP for use with Dante?

Re: SNMPv3 Support

Re: SFP transceivers to connect L009 & RB5009

Re: Hardware to run Dude server

2.5 gig RJ45 SFP for L009 router

Re: 📣 WinBox 4 is here 📣

CRS310-8G+2S+IN & CSS610-8P-2S+IN, S+RJ10

Re: Is SwOS dead?

Re: LACP betweeen SwOS Lite (CSS-610) and OPNsense (FreeBSD) breaking

Use backup config from Switch A on Switch B

Re: CRS310-8G+2S+IN Swos SFP+ Issue

Re: SNMPv3 Support

Re: SFP module is extremely hot

Re: SFP module is extremely hot

Re: SFP module is extremely hot

Re: Xbox Series X/S QoS tagging

Re: Switch advice, CSS610 poe and CRS310 together

Switch configuration, CRS models

Re: Router config for IPTV (non-VLAN)

Re: SwOS Lite DHCP server Options

Re: SwOS Lite version 2.18 released!

Switch advice, CSS610 poe and CRS310 together

SwOS Lite DHCP server Options

Re: CSS610 Multicast IGMP-Snooping parameters

Re: SwOS Lite version 2.18 released!

Re: IP-TV how to config? Get rid of CTS-HES-3106 switch

IP-TV how to config? Get rid of CTS-HES-3106 switch

Re: CSS326-24G-2S+ & active cooling

Re: CSS326-24G-2S+ & active cooling

Re: New to Mikrotik RouterOS env.

CRS326, CRS312, How do i setup DSCP for use with Dante?

Re: CSS326-24G-2S+ & active cooling