I am currently testing with this setup. I did have my providers router in pass through mode so the MT was the external router. Because of my failed attempt I am just testing internally until I think I have something I can test with again and will supply it with a public IP. I do have the wire guard ...

So I believe I added what you suggested but still no communications on the wireguard connection. However in my previous config I didn't have it physically connected to the WAN port, I plugged ether 1 (WAN) into my home router and it added the 192.168.0.0 network with IP of 192.168.0.18 to the addres...

So is default config and only modifications are adding the wireguard interface, assigning ip to the wireguard interface, setting up wireguard server and adding a peer. The results are that my client connects but I cannot ping the 192.168.199.1 of the wireguard interface or get to anything else. Than...

Reference https://forum.mikrotik.com/viewtopic.php?p=899406&sid=934b9d7f6ce584019a5f672fce93ba87 My actually goal is RoadWarrior Setup eth1 to be my WAN eth2 to be my Admin LAN <=== Wireguard server to access this LAN eth3 to be my Client LAN <=== Wireguard server to access this LAN eth 4 to be ...