Is there any way to do a pppoe passthrough to my tower. I basically want to connect a 411 cpe connected to my hi-site which has the nas setup. I want to create multiple pppoe within the ethernet port for different applications. Dont want to use NAT for some of the apps as one of them is VOIP. I trie...

I cant seem to get my link working on N, cant seem to push more than 20mb/s send or receive, on both maybe 4mb/s I am using 29dbi Poynting dual feed dishs, 433AH with 1 x R52hN on each board. My conf is as below on my AP. set 1 ack-timeout=dynamic adaptive-noise-immunity=none allow-sharedkey=no \ an...

The setup on the R52nH is very confusing. I want to attach a poynting dual polarized 5.8gh dish to one of these cards on both pigtails. I am hearing mixed opions regarding this. Will it run faster if I use 1 per pigtail or won't it matter,, but then must I use OSPF to run the full duplex link?

I dont know if this has been answered as yet. How would you use a R52nH with a RB433AH and a dual feed 5.8ghz dish to setup a full duplex link? Would you use 1 card per feed or both feeds onto one card? Would the card auto do full duplex or have to use OSPF to get best speed and duplexing? Please as...

Is there anyway to setup 2 dsl modems connected to a rb450 on ports 3+4 and 2 lan cables connected to ports 1+2, use the following senario lan 1 uses a pppoe username dialing out on port 3 lan 2 uses a pppoe username dialing out on port 4 basically what i want to do is anything from lan 1 must leave...

I have re enabled OSPF with my network once again, will test and let Mikrotik Support know if i still have a problem. Basically i had done the following: disabled default forwarding on my sectors, given no ip address to the sectors, Enabled OSPF with security, Enabled MAC auth on radius and on the r...

Thank you, seems to be working. So when i client connects on PPPOE the router creates the routes only then. I take it, it is recommended to set up OSPF. However OSPF slowed my network down and had problems with interfaces with multiple networks on it.

I have a mikrotik wireless network at the moment with 6 high sites. I want to only allow my PPPOE-clients to have access to the internet. I want to be able to disable someone trying to give their computers an IP address on their local machine without authenicating with PPPOE. any suggestions. I am u...