hi, i am back!!! i have same config as earlier, just little different. port forwarding is not required in this setup. i have 2 bridges but one bridge (bridge2-bakiSagle) cannot upload any traffic i.e. uploading anything is not working, it just hangs. some websites were not working correctly (with pc...

hello????

hiiii
hope the last few posts dont DISAPPEAR???? this is #34 i think.

Also, it took me years to get to a reasonable level of understanding. Dont expect to get it in a day. :-) If one does not need to mangle, which is more complex, and can use routing rules, routing rules are generally preferred. Routing rules force traffic to the table outlined period. They cannot af...

hiiiiiiiii

that rule was told by you to me!!!! in an earlier post!!! OR it might be in defconfig (default config of mikrotik) that i borrowed/copied/implemented. i also thought it to be of no use BUT since it is in defconfig or U told me , i did it. what should be the mangles then?? i had just started to under...

hiii!! anyone??

hi i have tried out mangle as well as routing rules methods. here is the mangle setup: (port is just only getting forwarded ONCE at handshake but then no communicaton is happening over it) # 2024-07-18 08:54:54 by RouterOS 7.11.2 # software id = xxxxx # # model = RB4011iGS+ # serial number = xxxxx /...

hi guys, need to trouble u again!!!! i have done away with PCC completely. i want 3 vlans for the three ISPs with 2 ports attached to each vlan. the config is working properly BUT i can access my router (mikrotik) ONLY thru the mac address (in winbox) and NOT thru its ip. i want to be able to access...

ok. so its working absolutely fine. have posted BOTH configs. i.e. with 2 vlans and other with 2 bridges. vlans: # 2024-05-18 22:31:36 by RouterOS 7.11.2 # software id = xxxxx # # model = RB4011iGS+ # serial number = xxxxx /interface bridge add name=bridge1 vlan-filtering=yes /interface ethernet set...

I never said you should remove mark-connection rules. What I've said was that you should use the same connection mark both for those connections from LAN to internet that you want to use WANx and for those connections from the internet to LAN that happened to come in via WANx, so that the translati...

Post your final config for review............

fuck. it aint working. the port is getting forwarded after many seconds (in the wireguard client). and the connection is shaky/lagging/verrry low bandwidth. shit, it was working fine earlier!!!!!

FUCK!!! i had written a LOT of stuff/post AND the website just logged me out!!!!!!!!!! ass!!! in short.....i tried following 'anav's and 'sindy's comments, now port is getting forwarded. even with ANOTHER setup with 2 BRIDGES and all. as soon as the problematic "clash" of prerouting in vla...

And BTW, this is my temporary setup/config, when i want to test things that require 2 different isps. My regular config has ALL 3 isps PCCied and having fallback routes ('main') and all. during this testing phase , i dont need the fallback 'main' routes for vlan1. thus, i 'load' this given config wh...

thank you soooooooo much to 'sindy'. do u have a paypal address? i would like to give u some money (just according to my worth!!) for the BIIIG interest u took in my problem. thank u once again. i think u can get a few pizzas for 10 USD , right? (at least in the usa , i think. never been there). alt...

the mangle rules you want to assign a connection mark toether1-youbroad or toether3-tata to the initial request packet from 192.168.9.x to ip.of.ether.2 ignore that packet because there is a match condition dst-address-type=!local in these rules. Years ago someone has misunderstood the meaning and ...

So what you want and expect is that a packet sent from a device in 192.168.9.0/24 to the public IP address attached to ether2 port 11111 will go out via ether1 or ether3 depending on the PCC outcome, get src-nated to the public address of ether1 or ether3, and land on ether2 after passing through t...

Also you do not connect wireguard between vlans on a router, you use firewall rules in the forward chain to manage connectivity between local subnets.

i dont want wireguard to connect between vlans!! i want it to use the two different isps.

hi, i have purchased few months ago a RB4011iGS + RM . it is 10 port gigabit switch like router. I have started from a clean slate (no defconfig). i have watched some youtube videos and successfully configured 3 dhcp clients on port 1, port 2 ,port 3; with per connection classifier rules in firewall...

VPN is for remote clients coming in on a particlular WAN. vpn is for accessing office/vlan2 network from outside. Vlan2 has a single server and other normal PCs. 'outside' network (having wireguard client soft on windows PC) is supposed to be vlan1. vlan1 has PC with wireguard client. this client is...

hi, have uploaded my latest config. btw, what i am doing is: testing a openvpn and wireguard server. i.e. the server is in vlan 2 and i am connecting to it from a client which is in vlan 1. thus i cannot have the vlan1 to use isp2 or vlan2 to use isp1,isp3. the vlans should have their seperate isps....

hi anav, have now done VLANs. saw a couple videos and also ur comment. port is STILL not getting forwarded. BTW i have kept PCC seperate for the 2 networks/vlans. i.e. vlan1 has pcc but vlan2 does not have it.

Why not have all three WANs share PCC as well? What are the down/up throughputs of each WAN?? i want to seperate the wans into 2 groups. i dont want dhcp server 2 to send traffic to isp1,isp3. i want no communication between the 2 networks. isp2 alongwith pports 6,7,8 should function as a seperate ...

hi. as illamajaja showed me, i have attached the rsc file here. i went back to doing PCC as ecmp was not giving me combined speeds of the isps. so now only isp1 and isp3 are pcc. isp2 is on its own (i.e. accepting traffic from bridge2 directly). i created 2 bridges as i needed to attach dhcp server ...

hi everyone. the pcc is working fine. now i want todo 2 seperate networks with the 3 isps. i.e. isp1 and isp3 (ether1, ether3) in one network with access to ONLY ports 4,5,9,10 . AAND other isp2 (ether2) in another network with access to ONLY ports 6,7,8. i successfully configured this and the 2 net...

hi,
what is "bonding"? is it useful in my scenario where i have one mikrotik and it uses 3 dhcp isp ports and i want to join their speeds.

i think bonding requires two mikrotiks or routers, right? it is like link aggregation on some routers, right?

yeah. i saw that official mikrotik video just before seeing ur post. followed that one and now everything is OK!!!! BTW what do u mean by "Keep in mind you wont get aggregation,....." . my download speed from single pc from single gdrive and all has become the total of all isps combined. n...

To do PCC with dynamic IPs you will need scripts for each ISP such that the new gatewayIP is entered into all the applicable routes.

btw, i used this video to do the pcc. is this correct? i just followed the video:
https://www.youtube.com/watch?v=MJzJ2xNlzw8

To do PCC with dynamic IPs you will need scripts for each ISP such that the new gatewayIP is entered into all the applicable routes.

there is no dynamic gateway. all three gateways are always the same. the ip assigned to this mikrotik might change, but that is also mostly static.

hi, i have purchased few months ago a RB4011iGS + RM . it is 10 port gigabit switch like router. i have watched some youtube videos and successfully configured 3 dhcp clients on port 1, port 2 ,port 3; with per connection classifier rules in firewall. the problem : as soon as i created the first dhc...