Same issue, unfortunately I can't find much documentation about ipv6 bgp on routeros 7+

As it is described in the article above input and output processes are not handling route calculations. bgp input process receives updates, decodes and sends routing info to main process. Main process is doing the calculations bgp output is similar to input, it "asks" for routes from the ...

There are certain tasks done by one process, check this article how multicore with routing processes work:
https://help.mikrotik.com/docs/display/ ... re+Support

To me it looks like I have multiple process: Thank you!

e.g: Screenshot 2024-07-31 at 12.04.32.png Screenshot 2024-07-31 at 12.06.05.png In the session table I see only 2 sessions, although all 4 are established (I checked with the providers) : Screenshot 2024-07-31 at 12.06.52.png it practically blocks the normal operation of the router, although the pr...

ip route print detail where bgp-as-path ~ "30621\$" is not going to work because such parameters do not exist. And even if you do such search in a correct menu with correct parameters you are asking console to run a script that gets whole routing table ( which by itself could take few min...

Hi, I have a CCR2116-12G-4S+ / RouterOS 7.15.3 with the following setup: - 2 Default route BGP sessions; - 2 Full routing table BGP sessions with 1 mil.+ prefixes. When I establish a bgp full routing table session, the router behaves super weird, commands like the following no longer work: routing s...

I solved it, who would say that sometimes ChatGPT is not a brilliant service

Solution:

I have a strange case and I can't find a solution. I have 2 interfaces: SFP-ISP1 and SFP-ISP2, each interface has one BGP session through a private IP. I have a Bridge: LAN-Bridge, in this Bridge is allocated the public ip class 81.x.x.x/24 , announced through BGP The gateway in LAN-Bridge is assign...

My CCR2004-1G-12S+2XS has been working fine for over a year. I encountered this strange behaviour recently and today it happened for the second time. So I started searching and found this tread... The FS ONU causing the issue seams likely since I plugged in one of those just a couple weeks ago. But...

I have the same problem with CCR2116-12G-4S+ router. The problem happens once in a while, can be an hour, 5 days, 2 months, super random. When this happens, part of the router's functionality becomes unavailable, the router's fan makes a sound like it stops and starts repeatedly. Screenshot 2024-05-...

Ok.
I moved these SFP to a CRS310 and I have no more issues.
Some people also used CRS328 with success.
The issue seems to be only related to CRS305.

I confirm this, I tested on a CCR2116-12G-4S+ and I did not have this problem.
Could it be a bug?

Hi,

It seems that the last 7.15 beta is better.
Did you tried ?

Yes, I already tried, this has been happening for several versions, I always updated in an attempt to solve the problem.

I have this exact problem, only much more often, once every 2-3 days.
I use 2 GPON SFP, seems to have a problem with one or the other from time to time.

7.14beta3 still persist .

A solution or a workaround would be useful

I encountered the same problem, on the same router model.
I use 2 SPF ONU.

Hi,
The problem is replicated on CCR2116-12G-4S+ , it seems that a solution has not been found yet.
What I noticed, that happens from time to time.

Has anyone found a solution?

Thank you!

Hello! I have a CCR2116-12G-4S+ , after installing version 7.12rc1 I noticed a strange behavior, the coolets start and stop quickly. The red LED for FAULT also lit up. The interface was still working but it was loading very slowly, I went into the logs and it seems that the power supply had failed &...