Thanks for your reply. I know that it's not good practice but a temorarily required workaround. Why do the ports have to be member ports of the same bridge? In my oppinion it should also work if they are on different networks. Config: /interface bridge add admin-mac=18:FD:74:D2:24:48 auto-mac=no com...

Today I wanted to build the following test setup as a required workaround and noticed that the traffic drops as soon as I attach the Mikrotik WAN port to the network. Am I missing out something? 1. Until the WAN port is connected I can obtain a DHCP adress (192.168.80.x) or configure a static 10.0.0...

I modified the script so that it also works if you are a modem and receive a private IP on WAN Interface: :global AfraidDomain "xxxx.mooo.com" :global AfraidUpdateURL "https://freedns.afraid.org/dynamic/update.php?xxxx" :local InternetCheckTimeoutCount 10 #Do not modify below :lo...

/interface bridge vlan
add bridge=bridge tagged=bridge,etherN,... vlan-ids=2
...

Thanks, but why is it required to set the VLAN tagged on the bridge AND on etherX?

I have to reopen again! The "tagged" Ports are not working, only the untagged. Any ideas?

be careful with using .local for your internal domains. .local is reserved for MDNS/Bonjour (RFC6762) used by many Apple Devices, Google Chromecast,Smarthome stuff etc. and using it for your internal domain might cause hard to track issues. https://en.wikipedia.org/wiki/.local If you have an offici...

I prefer to use VLAN all the way, no hybrid/implicit VLAN's. That would mean that you add an additional VLAN.
In your config I missed the DHCP servers for the VLAN's, is that on purpose?

Btw, you didn't follow the tutorial completely.

What VLAN would be required in addition?

Hi, thanks for your help, the activation did the trick. It's true that I didn't follow the whole tutorial because I tried it several times. I also added DHCP now and everything's working.

Hello, I tried to follow some tutorials (https://forum.mikrotik.com/viewtopic.php?t=143620#p706997, https://forum.mikrotik.com/viewtopic.php?t=182898#) to achieve a rather simple setup which is depicted here. For some reasons it's not possible to ping the address of the vlan. Is there any advice? Dr...