1, definitely, this would simplify the management of complex networks and configurations 2, docker or another linux container solution, for straightforward installation you could offer a virtual machine as an .ova image, then it could run easily in proxmox or another virtualization environment 3, co...

According to the wiki, Quectel's 5g modems would be supported and, for example, Quectel's rm520ngl would be functional. My intention is to install the L23UGSR-5HaxD2HaxD outside, where can I find a suitable case for it https://help.mikrotik.com/docs/display/ROS/Peripherals take a look at enclosures...

According to the wiki, Quectel's 5g modems would be supported and, for example, Quectel's rm520ngl would be functional.
My intention is to install the L23UGSR-5HaxD2HaxD outside, where can I find a suitable case for it
https://help.mikrotik.com/docs/display/ROS/Peripherals

I contacted sales and they told me the following Hello, Thank you for contacting MikroTik Support. Ltap and Wap are not EOL, but won't be the best options as there might not be enough space inside. It would be better to use L23UGSR-5HaxD2HaxD as a base for 5G modem, as you can create your custom cas...

hi My intention would be to get a 5g router as a backup connection, however, when I looked at Mikrotik's selection, 5g routers aimed at outdoor use do not seem to be available. My intention was to build a 5g router on top of ltap or wap r ac, the modem of which could be changed to a better one if ne...

Individual ports are added to the bond, and the bonds are added to the bridge. What determines which switch is primary and which is secondary, the bridge priority of both switches is 0x8000, if I set the priority of the primary switch lower, is it then the primary device in mlag, now the switches w...

hi I'm trying to create an mlag between two crs326s, mikrotik's wiki has one t instructions but I get an error when I try to add the interface to the bridge, that the interface ether15 would already be a slave, I have added the ether15 interface like this. add mlag-id=10 mode=802.3ad name=client-bon...

I tried updating routerOS 7.14 on the switch
again and the problem would seem to be mysteriously fixed, apparently the main problem was not the switch but the opnsense firewall

The same logic should also be applied to the apparently working switch. How are the switches connected, maybe the main switch is not setting the tag or a middle-man switch is doing it. The main switch is connected to the opnsense firewall from the ether1 connection, as well as the second switch, i....

I think the issue you are having is because you want to tag traffic on a specific port but also setting a pvid with the same vlan id. For example add bridge=bridge comment=defconf frame-types=admit-only-vlan-tagged interface=ether7 pvid=30 add bridge=bridge comment=defconf frame-types=admit-only-vl...

Update vlans still don't seem to work on routerOS version 7.9, now I think there is some error in the configuration of the switch, here is the full configuration # mar/05/2024 15:51:17 by RouterOS 7.9.2 # software id = 4INH-Y6X0 # # model = CRS326-24G-2S+ /interface bridge add add-dhcp-option82=yes ...

It seems like there might be a compatibility issue with CRS326 and RouterOS version 7.13. Check your bridge and spanning tree protocol settings, especially on the switch where VLANs aren't working. Consider downgrading to RouterOS version 7.9 for a potential workaround. I can't get routerOS version...

It seems like there might be a compatibility issue with CRS326 and RouterOS version 7.13. Check your bridge and spanning tree protocol settings, especially on the switch where VLANs aren't working. Consider downgrading to RouterOS version 7.9 for a potential workaround. Is this a commonly recognize...

crs326 vlans don't seem to work in routerOS version 7.13 routerOS 7.9 they work, has any setting changed between those software versions. Ping no so it goes, both in the internal network and to the external network, as if the speed of the port were 0, could rstp be the cause of the problem, because ...

The latest version is 7.13 has the problem been fixed in it or vlans still not working crs326

hi all I updated my switch crs 326-24g-2s+rm routeros to version 7.12 and now vlans not working, seems like I've encountered a similar problem to this user https://forum.mikrotik.com/viewtopic.php?t=198738 I haven't made any configuration changes, where can I download version 7.11 beta4 or older and...