You were correct I had to add a second config with wpa-psk and they all now connect. currently that is on a hidden ssid but looks like I will have to add a seperate Vlan for them ( I havent done VLans yet as there is a lot of differing info on how to do them for wifi devices so if anyone has a simpl...

Have you tried setting the encryption ciphers? I have the CCMP and GCMP ones selected on my setup. Or perhaps try setting nothing more than wpa2.

Just tried adding those cyphers, no luck. will have to try fiddling with lower security maybe on a new security profile just for this

Your posted config shows a security profile "sec1" being used but I don't see it declared anywhere. Can you please post it? My best guess is that you are trying to use WPA3. A lot of IoT devices only do WPA2. /interface wifi security add authentication-types=wpa2-psk,wpa3-psk disable-pmki...

Previously had an Hap-ac3 setup and config and have moved to ax2 devices controlled via capsman via a rb5009. Now I am finding I cannot add all my smart lights I previously set up. the devices just never add and gain an ip address. I tried adding thewifi6n to see if it picked up a sipler radio but m...

I upgraded my RB5009 last friday, also acting as capsman, incl AX2 and AX3. On that RB5009 are also some containers running (amongst them PiHole). I had zero problems with that upgrade. One exception: upgrade via capsman of the cap devices was not possible until I specified an upgrade path and the ...

FYI I did this upgrade to my rb5009 which is capsman to some wifiwave2 devices as well. I had recently added Adguard Container and when I did the upgrade the container didnt work anymore despite still running, couldnt ping it. So I had a DNS issue that took me a while to fix (forgot about the Nat se...

Quick question:

what's this ?
/ip pool
add name=dhcp ranges=192.168.0.10-192.168.88.254

That's quite a BIG range for a DHCP pool ... and possibly the cause of your problem.

Well I definitely missed that mistake!! was supposed to start at 192.168.88.10 not sure how that 0 got in their! Thanks

Hi hope this is the relevant config (from the Capsman server RB5009) Please note if I set a manual static IP in the correct range on the device that is connecting (a tv) then the internet works. but DHCP always assigns to the .78 subnet for some devices (not all). When moving to the RB5009 from a di...

I just got a new RB5009 and have setup a Capsman server config on there for 2 Hap AX2s. The config finds the caps devices successfully and assigns IP addresses but for some reason in a different subnet which then causes the devices not to be able to connect to the internet. my default on the DHCP se...