*) smb - stability improvements for client/server; The SMB client run by Infuse player app on Apple TV stopped working. macOS native SMB client connects without problems. Below are dissections from Wireshark. Infuse: --Request by Infuse--> SMB (Server Message Block Protocol) SMB Header Server Compo...

Yesterday I have upgraded from 7.16.2 -> 7.17. So far so good I thought. Until I found out that I cannot access my SMB shares through Android, iPhone, iPad, Google TV. When I open it with my WIndows 11 PC or Kali Linux there is no problem. Once I input my username and password from the not working O...

One thing I have discovered after using this mDNS approach is, that before all traffic was TCP or UDP with one of these ports 137, 161, 515, 54921, 54925. Now everything runs only on these three combinations: TCP : PC_Client: Random_High_port -> Printer: 80 TCP : Printer: Random_High_port -> PC_Clie...

WORKS! Now I got a working Brother Wi-FI MFP printer, which prints and scans residing in a different VLAN than the client PC. BTW, the most recent firewall rules enabling mDNS UDP 5353 did not increment at all whilst installing the printer nor whilst printing/scanning. Will try to add the MFP on a d...

Using documentation and a little bit of chatGPT a following script has been generated. Is that it? # Enable mDNS on MikroTik /ip dns set allow-remote-requests=yes # Add mDNS Repeater interfaces /interface mdns add interfaces=LAN-34,IOT-200 comment="mDNS Repeater for Printer" # Optional: Ad...

By having following two lines on the first two FORWARD position of the firewall rule-set: add action=accept chain=forward comment="ALLOW LAN34 to Brother Printer - ALL" dst-address=192.168.200.40 log=yes log-prefix=ALL->Brother add action=accept chain=forward comment="ALLOW Brother Pr...

I have a similar problem with Mikrotik TB5009UPr+S+ with OS 16.2. - VLAN34 - Normal (192.168.34.0/24) - VLAN200 - IOT (192.169.200.40 Brother printer) I did get it to work by: 1. Having the printer reside in the VL34 and install it with the Brother full driver and utilities EXE. The printer was foun...

Hey guys. My Specs: RB5009UPr+S+ , RouterOS 7.14 stable. What I already have achieved in terms of OpenVPN and IPTV is: Static interface for my only OVPN/PPP user. I think it makes firewalling etc. much more easier, if you can address a configuration item to something which statically exists. Can acc...

What I did find out is, that this issue comes up after a firmware upgrade or a soft reboot = all reboots initiated via software (e.g. Winbox or ssh). Whenever I unplugg power for a couple of seconds and then plug it back again - it works correctly: [myname@mikrofw] > /disk/print Flags: E - EMPTY, B ...

It was kinda working for a while. Now it does not again. It sets "data" on a not-being-used slot.. [myname@mikrofw] /disk> print Flags: E - EMPTY, B - BLOCK-DEVICE; M - MOUNTED Columns: SLOT, MODEL, SERIAL, INTERFACE, SIZE # SLOT MODEL SERIAL INTERFACE SIZE 0 E data USB 3.20 5000Mbps 1 BM ...