Thank you for answer!

How much BGP routes RB1100AH and RB1100AHx2 can handle.
will it normaly work with 3+ full BGP tables and what throughput can it handle with this config.
Also basic firewall will be in use.

Realy no one knows?

How much BGP routes RB1100AH and RB1100AHx2 can handle.
will it normaly work with 3+ full BGP tables and what throughput can it handle with this config.
Also basic firewall will be in use.

i agree about delete and etc ... but button "reboot" is near "reconect" and not under some menu.

Please add additional asking (Do you realy want to reboot?) for RB devices in dude ... accidental clicks on reboot button may be not so good.

i have problems with ipsec, it works only in one direction (other end is not MT). But MT is logging:
11:00:14 ipsec,warning decrypted packed did not match policy

Is there a way to see what packed did not match policy?

i'm talking about pptp. limit by adress i alredy can without using radius....

from mt manual:
Calling-Station-Id - PPPoE and HotSpot- client MAC address in capital letters; PPTP and L2TP - client public IP address; ISDN - client MSN

i need to limit by subnet not ip adress.

Is there a way to limit ppp secret login subnet (not ip)?
For example user 'usr1' can login only from 10.10.1.0/24 and 'usr2' only from 10.10.2.0/24

as alternative use EoIP tunel from station to AP and bridge it on AP, in client bridge with ethernet ...

Is there a way to tell what model (not chipset) card is on router from MT?

If i use simple queues limiting on for example adress 10.10.10.10 and with queues tree limit for this adress for exapmple port 80 traffic. Will MT use both queues and in what order?

add frequencies you need in scan list. By default there are not superchanels

heh...

Hard question, because i have all sort or versions from 2.2 to 2.9.12

~ -25 - no problems with RB5xx and RB2xx

you can youse linux and this perl script: #!/usr/bin/perl # # Serial port data receiver (logger) # Receives at any speed without data loss and uses practicaly no CPU use Device::SerialPort; use Time::HiRes "usleep"; my $port = '/dev/ttyS0'; my $ob = Device::SerialPort->new ($port); $baud =...

Both have MT 2.9.5

Hello I'm having problem with 5ghz Point to Point link - when it disconects it can't get asociascion for some minutes. On client router in log: 12:45:00 wireless,info Wlan-Client: failed to connect to 00:03:7F:BE:F1:64, join timeout 12:45:00 wireless,info Wlan-Client: failed to connect to 00:03:7F:B...

Can't anymore login to MT. It display username and password prompts, but says that all users are wrong - same with telnet/ftp/ssh/winbox. No users were deleted or disabled.