By VPN you mean L2TP or PPTP on router? If so, did you have you firewall rules in same order as now when testing? Because that wouldn't work. Rules are checked from top to bottom, so any connection from WAN is blocked by fifth rule and further ones that allow it don't matter. As for different SSTP ...

What exactly doesn't work as you want? None of your forwarded ports is configured to work exactly same from both WANs. Ports 80 and 8181 are limited to WAN1 (in-interface=WAN1). And 443 is forwarded to different internal address, depending on used WAN. Btw, SSTP can use any port, it doesn't require...

Yeah I took a look and commented on your other post---> your mangles made no sense, totally wrong, besides the fact you failed to provide any useful context for mangling. As well your routes were completely hosed. Not surprized nothing works for you. Post your config, explain the requirements fully...

Hi guys, im gonna try to explain me. I need config a router with 2 ISP, VPN pptp (or similar but no sstp (i need this port 443 for guacamole)) and port forwarding for VM connection. I tried a lot of config i find here but its impossible for me. I want to believe that I am doing something wrong becau...

Hi guys I have a problem with this, first of all i post the config. # software id = 8MS4-GGM7 # # model = RB2011iL # serial number = HE508PC94SW /ip pool add name=VPN_PORT5 ranges=192.168.10.2-192.168.10.50 add name=Red_Taller ranges=192.168.20.10-192.168.20.100 add name=DHCP2 ranges=192.168.1.150-1...

So finally its working and the only i do its add this config:

/ip route rule
add dst-address=192.168.100.1/24 routing-mark=to_WAN1 table=to_WAN1
add dst-address=192.168.120.1/24. routing-mark=to_WAN2 table=to_WAN2

Both works but the router sends the answer received with 2'nd WAN via the main one (1'st) which is chosen as default out interface. You should mark connections with source and then send the traffic back via the proper interface. Searched for topics and the one you can start with is https://forum.mi...

Hello, first of all, sorry if I write something wrong, I'm learning English and using google translate :? I am completely stuck with this, I need to configure 2 wan with 1 lan network on mikrotik, I have followed this tutorial-guide and both connections work for me. https://wiki.mikrotik.com/wiki/Ma...