MikroTik

gimmepatiencequickly

Thanks for the info Boardsurfer. Unfortunately I do not have administrative access to the fortinet server. I have spoken to our client to assist with the setup of the VPN connection. I would appreciate if you would provide instructions on how to set this up I was thinking of something like this, but...

gimmepatiencequickly

Good day, Has anybody resolved this issue? I am also not able to connect with this device. I connected the K3570-Z device with version 5.2 on RB951H-2HnD - Not working... I upgraded RB to ver 6.2 - Not working.. when connecting the device, the System resources shows the device in USB, but when addin...

gimmepatiencequickly

Hi, I need to connect to a remote network where a fortigate device is installed. I would like to use my mikrotik router to connect to the fortigate device using an ssl-vpn connection. I am not the administrator of the fortigate device, so I will need to get the assistance of the administrator on the...

gimmepatiencequickly

I have a stash of RB411's/RB133s in my drawer and most of them have broken Ethernet ports. The ethernet ports usually break after heavy weather, or major power surges/spikes. (I can connect to the board through the wireless interface) This tells me that I may have an earthing problem, which is very ...

gimmepatiencequickly

Your first print out is not from RB532. RB500 don't have 175MHz CPU clock. yup, I have been confusing myself lately but I got the answers I needed thanks. system resource> print uptime: 2w22h56m44s version: "2.9.50" free-memory: 8820kB total-memory: 30428kB cpu: "MIPS 4Kc V0.10"...

gimmepatiencequickly

Thanks for advice I got the model number I needed. I am running V2.9.50, and yes, it is my main AP, that feeds most of my clients, and my other AP. It is not that there are missing features, it is just that i like to keep with technology, and upgrades. system> routerboard print routerboard: yes mode...

gimmepatiencequickly

Hey guys, How do I know what routerboard i am using, without opening the enclosure, and causing downtime for my clients? I am using RouterOS V2.9.51 and /system resources says: # jan/28/2010 10:12:09 by RouterOS 2.9.51 # software id = XXXX-XXXX # uptime: 1w22h19m13s version: "2.9.51" free-...

gimmepatiencequickly

Hey ZAP,

I noticed your username may be incorrect. @iburst.co.za --- not @iburst.co.zaa

Remove one a
I am no iburst user myself, but I am zure that there is no double A in the username

gimmepatiencequickly

Ok I sent this forum llink to my boss, and this is what he replied. Regarding your HDD/licence theory... think logically - does a routerboard have a hard drive? I once lost an onboard NIC. Replaced it with PCI NIC, and had to buy new licence - personal experience.... that's how I know! Any theories?...

gimmepatiencequickly

That's not good, I am currently using an IDE Hard drive, and they are getting more and more difficult to get hold of. So if I was to replace the HDD, are there no exceptions as to retrieve my licence? Afterall, I am making previsions for the event before it happens, trying to make my job easier for ...

gimmepatiencequickly

Hello guys, I am running RouterOS V4.4 on an X86 Machine, and everything seems to be running as expected... for now. As a precautionary measure, I would like some advice as to what I should in the following scenario, which I think is about to happen soon. The PC Hardware seems to be failing with a f...

gimmepatiencequickly

What is the package dude-3.5-mipsbe.npk for? I upgraded a RB411 to RouterOS 3.30, as usual, then uploaded and installed dude-3.5-mipsbe.npk. The log says everything installed ok. In /system packages I have the dude 3.5 In winbox there is no dude menu, and when I run terminal I cannot find anything t...

gimmepatiencequickly

Hello guys. I installed mikrotik OS ver 3.20 on a CPE for testing purposes, and now I cannot log into the router... I tried using winbox, I tried telnet and SSH, but nothing works. The router does connect to the main AP, (Exactly as it did before the upgrade) and it is supplying the client with inte...

gimmepatiencequickly

Thank you Guys,

I have just finished reading the Apache documentation... and I am going to do exactly what you said. (Well almost anyway)

Thank you to both of you for your help.... Much appreciated

gimmepatiencequickly

Hello Galaxynet, thanks for the response... gimmepatiencequickly - Well you have a couple of things going on here.... Your first dst-nat rule is correct. The second rule (ether2 - I don't know what you're trying to do there....192.168.1.5 shouldn't be showing up on that interface.....) If I do not a...

gimmepatiencequickly

Hello guys and gals. Once again I have a small problem, this time it is Accessing my webserver. The domains: http://www.wowcomputers.co.za --- DNS Resolution --- 41.208.61.58 http://www.jonathan.za.net ---- DNS Resolution --- 41.208.61.58 My Network: 41.208.61.58 ---- ISP Static public IP Connected ...

gimmepatiencequickly

SurferTim Thank you for adding a bit of humour to my demise, it slightly brightened up my day... I am going to add the filter to the firewall you suggested. All my computers in my office will need "AP admin rights" So this is what i am gonna do --- /ip firewall filter add chain=input actio...

gimmepatiencequickly

Hello to all you Guru's I am such an idiot, partly due to lack of concentration... I set a firewall filter /ip firewall filter add chain=input protocol=!icmp action=reject reject-with=icmp-admin-prohibited So in essence, I cannot log in to my router unless I use an ICMP protocol to do it. Anybody kn...

gimmepatiencequickly

I will see what I can do about the masquerading. thank you. About the network throttle.... My ISP does not throttle anything, However, our telecoms company where we get our DSL line from does do a 75/25% share on DL/UP. So on a 512k adsl line I will get an upstream of 128, and downstream of 384. I a...

gimmepatiencequickly

Ok, so this is what has been showing on the AP and CPE. CPE Routes printout: Flags: B - blackhole, U - unreachable, P - prohibit, X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf # DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTERFACE 0 A S 0.0.0.0/0 r 10.5.0.25...

gimmepatiencequickly

First of all SurferTim, Thank you very much for your reply, it has put a few thoughts in my head.... Here we go. There are a couple things you did not mention. I presume the AP connects to the internet over an ethernet port, correct? No... the AP(Wlan2) connects to the internet over WLan1(10.4.0.253...

gimmepatiencequickly

Hello Guys and Gals, Ok, so as you can see in the subject I have no idea what I am dealing with here, but let me try to explain. I have 2 PC's connected to a CPE (CompA and CompB) and obtain IP address from the CPE via DHCP CPE - RB133/C with lvl 3 License Ether1 IP - 192.168.0.1/24 WLan1 IP - 10.5....

gimmepatiencequickly

lol,

How about a WWW/FTP server, and allowing people to DL it?
That way we do not have to publish our email addresses over the internet.

Software sounds good though, would like to get a copy too.

Thanks

gimmepatiencequickly

Hello Brian,

Suggestion: Could you tell us the AP problem in the first place, and perhaps a solution?

Thank you

gimmepatiencequickly

My contribution to this VERY helpful forum You'll need to specify the In Interface. So this should do it; chain=dstnat action=dst-nat to-addresses=192.168.76.4 to-ports=22 dst-address=213.151.203.22 in-interface=adsl_pppoe dst-port=22 protocol=tcp adsl_pppoe=whatever your internet ppp profile is set...

gimmepatiencequickly

ok, thank you...

Have you also noticed, that the timeouts are also more prominent and frequent during the day?

My Grid antennae are East and West facing, so in the Morning at about 6:30, is when the timeouts start and pretty bad during the day.

It still happens at night, but not as bad.
Thank you

gimmepatiencequickly

Thank you for your reply, Ibersystems

I would appreciate it if you tell me your power settings, I have never set them before, so they are on default, which I assume is 17dBm

Thank you

gimmepatiencequickly

Hello all, I have been having a problem for quite some time now, between 2 AP's. I have AP1, and AP2. The registration table on AP1 says that AP2 is connected with a signal strength of -62dBM Signal to Noise is at 42dB. The registration table on AP2 says that AP1 is connected with a signal strength ...

gimmepatiencequickly

I did, this is the file list and directory structure... \routeros-mipsle-3.1\all_packages_mipsle \routeros-mipsle-3.1\CHANGELOG_rc \routeros-mipsle-3.1\routeros-mipsle-3.1.npk <----- take not, this is not routeros -rb500 \routeros-mipsle-3.1\all_packages_mipsle\advanced-tools-3.1-mipsle.npk \routero...

gimmepatiencequickly

Ok, Normis... I am apologizing for any emotions I may have already poked, or are going to poke in Pandora's box, but I think you are confused with the files from V2.9.50. V3.1 does NOT have the file " routeros-rb500 " in the archive. It does have " routerboard -3.1-mipsle.npk" V2...

gimmepatiencequickly

ok, now I am confused, LOL So you are saying that for my basic config, I must only upload "routerboard-3.1-mipsle.npk" I will however be using NTP, so I will upload "ntp-3.1-mipsle.npk" too. I use DHCP, for CPE so "dhcp-3.1-mipsle.npk" must also get U/Led I am first goi...

gimmepatiencequickly

upload the same files that you have in your router now! just check in "/system packages" menu Thank you Normis, will do that. /system/packages (RB500)---------->Corresponding files in archive system--------------->system-3.1-mipsle.npk security------------->security-3.1-mipsle.npk ppp----...

gimmepatiencequickly

How many telkom accounts do you have Nuke?

You could add them all to your interface list and let them run simultaneously.

It used to work for me when I was running earlier versions of RouterOS, i am now currently using an uncapped service so it does not matter to me anymore.

Me.

gimmepatiencequickly

well thx mr unikyrn..but i cnat change the coustomers CPE.. i just need a solution on my tower only....could mikrotik can be treated as a hardware firewall.... Then why are you asking for recommendations for a better CPE, since you use them? And another thing UniKyrn, if you cannot access your clie...

gimmepatiencequickly

ok, I downloaded http://www.mikrotik.com/download/all_packages-mipsle-3.1.zip These are the files in the archive. advanced-tools-3.1-mipsle.npk calea-3.1-mipsle.npk dhcp-3.1-mipsle.npk dude-3.1-mipsle.npk gps-3.1-mipsle.npk hotspot-3.1-mipsle.npk ipv6-3.1-mipsle.npk LICENSE.TXT mpls-3.1-mipsle.npk m...

Search found 35 matches

Re: Fortigate SSL-VPN connection

Re: Vodafone 3G K3570-Z USB Modem

Fortigate SSL-VPN connection

Ethernet Ports Broken, How do I fix them?

Re: What routerboard am I using?

Re: What routerboard am I using?

What routerboard am I using?

Re: Basic router setup guide/tutorial ?

Re: RouterOS licence and broken hardware

Re: RouterOS licence and broken hardware

RouterOS licence and broken hardware

dude-3.5-mipsbe.npk?

MT V3.20 errors

Re: 2 Web domains, one server, How do I route?

Re: 2 Web domains, one server, How do I route?

2 Web domains, one server, How do I route?

Re: I cannot access AP router, I set the wrong firewall filter

I cannot access AP router, I set the wrong firewall filter

Re: I do not know the Problem, Maybe routing?

Re: I do not know the Problem, Maybe routing?

Re: I do not know the Problem, Maybe routing?

I do not know the Problem, Maybe routing?

Re: CPE-Antenna alignment via customer / Application available?

Re: AP or CPE problem?

Re: Problem to connect to server through mikrotik router

Re: A problem between 2 AP, with a distance of less than 3km

Re: A problem between 2 AP, with a distance of less than 3km

A problem between 2 AP, with a distance of less than 3km

Re: Upgrading to 3.0 on a RB500

Re: Upgrading to 3.0 on a RB500

Re: Upgrading to 3.0 on a RB500

Re: Upgrading to 3.0 on a RB500

Re: Script to change Adsl accounts

Re: heavy letancy frm my coustomers.plz help me its urgnet..

Re: Upgrading to 3.0 on a RB500