Also, reset SXT and redid the changes again. Changed eth2 LAN IP to other.

No changes

Seems no reply from DNS. Logs from main router, when DNS working (other pc on lan): 2024-03-01 21:14:42 Local User (MAC=B2-43-33-B9-D8-D9): 192.168.1.8:33946 -> 142.250.203.202:443 (TCP) 2024-03-01 21:14:42 Local User (MAC=B2-43-33-B9-D8-D9): 192.168.1.8 DNS -> 8.8.8.8 inquire gmail.googleapis.com L...

No working DNS - no connections to NTP servers = wrong date and time.
Entered ntp servers (IP only). Now date and time is correct. And no changes after reboot. DNS not working.

Unchecked Allow Remote Requests [admin@MikroTik] > /ip export # 1970-01-02 03:19:58 by RouterOS 7.13.5 # software id = NU11-ZF6U # # model = SXTR # serial number = xxx /ip hotspot profile set [ find default=yes ] html-directory=hotspot /ip dhcp-client add interface=bridge /ip neighbor discovery-sett...

Sorry... :) [admin@MikroTik] > /ip export # 1970-01-02 02:58:30 by RouterOS 7.13.5 # software id = NU11-ZF6U # # model = SXTR # serial number = xxxx /ip hotspot profile set [ find default=yes ] html-directory=hotspot /ip dhcp-client add interface=bridge /ip dns set allow-remote-requests=yes /ip neig...

[admin@MikroTik] > /ip pool remove default [admin@MikroTik] > /ip dhcp-server remove 0 failure: can't remove dynamic object [admin@MikroTik] > /ip export # 1970-01-02 02:51:37 by RouterOS 7.13.5 # software id = NU11-ZF6U # # model = SXTR # serial number = xxxx /ip hotspot profile set [ find default...

How to remove in terminal? Web interface doesn't show these settings.

/ip hotspot profile set [ find default=yes ] html-directory=hotspot /ip pool add name=default-dhcp ranges=192.168.188.10-192.168.188.254 /ip dhcp-client add interface=bridge /ip dhcp-server network add address=192.168.1.0/24 comment=defconf dns-server=192.168.1.3 gateway=\ 192.168.1.3 netmask=24 /i...

Internet not working.

DHCP client config

Removed 192.168.1.3 IP [admin@MikroTik] > /ip route print Flags: D - DYNAMIC; A - ACTIVE; c - CONNECT, d - DHCP Columns: DST-ADDRESS, GATEWAY, DISTANCE DST-ADDRESS GATEWAY DISTANCE DAd 0.0.0.0/0 192.168.1.1 1 DAc 100.81.243.0/24 ether1 0 DAc 192.168.1.0/24 bridge 0 Found problem... DNS :) IP ping - ...

OK... DHCP removed from bridge. [admin@MikroTik] > /ip route print Flags: D - DYNAMIC; A - ACTIVE; c - CONNECT, d - DHCP; + - ECMP Columns: DST-ADDRESS, GATEWAY, DISTANCE DST-ADDRESS GATEWAY DISTANCE DAd 0.0.0.0/0 192.168.1.1 1 DAc 100.81.243.0/24 ether1 0 DAc+ 192.168.1.0/24 bridge 0 DAc+ 192.168.1...

Question: Why do you use pass-through ? In my mind pass-through is better than few routes (LTE operator external IP > LTE operator CGNAT address > SXT > Draytek > LAN. With pass-through I eliminate SXT and my Draytek wan2 port gets LTE operator CGNAT address, not DHCP adress from SXT). - remove dhc...

OK.. i will try to to explain my network :) Main router Draytek vigor with dual wan, DHCP and etc... In this router wan1 - VDSL, wan2 - SXT. Both working on load balancing mode. So... about SXT. Few days ago I bought SXT, put sim card, turn eth1 to DrayTek router WAN2 port, disabled eth1 on bridge a...

/interface bridge add admin-mac=78:9A:18:91:59:CC auto-mac=no comment=defconf name=bridge /interface lte set [ find default-name=lte1 ] allow-roaming=no band="" network-mode=lte \ sms-read=no /interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface lte apn set ...

Already done, but internet not working. I don't know how to set distance for other routes.

eth1 - lte passthrough to eth1. Eth2 - on bridge. Bridge connected to LAN and get IP from LAN DHCP.
Problem: no internet on MikroTik SXTR device. I need it for updates, ntp, etc...
Question: how to configure Mikrotik to connect to LAN and get internet from LAN router?

It works! I don't know how, bet manual set date ant time and uncheck "Use Network APN" again. And internet start working.... Nice...
My operator doesn't give me external IP. So i think it's ok.

status: connected model: FG621-EA revision: 16121.1034.00.01.01.04 current-operator: Telia current-cellid: 46601495 enb-id: 182037 sector-id: 23 phy-cellid: 217 data-class: LTE session-uptime: 3m28s imei: xxx imsi: xxx uicc: xxx primary-band: B1@20Mhz earfcn: 300 phy-cellid: 217 ca-band: B28@10Mhz e...

LTE interface is always visible and always show RSSI, RSRP and other two. Prepaid sim card worked all the time (about 2-3 hours). I have tested default settings (router and firewall, with NAT), only router and firewall, passthrough to eth1 or eth2, used and not used APN, changed APN settings (e. g. ...

Recently I bought MikroTik | SXTR&FG621-EA LTE6 (new). I have hybrid internet from operator Telia and Sagemcom f@st 5360t router (VDSL and 4G LTE). So I removed sim card from Sagem router and put it on MikroTik | SXTR&FG621-EA LTE6. I could see operator, band, signal, but no internet (no pin...