Hi there,

Yes, my server is NAT'ed behind the router, but I have done NETMAP'ing from Internet to port 25 and 80 as my Lotus Notes Server act as mail-server and webserver for VPN clients and Internet clients.

Best regards,
Jens

Hi everybody, I've got a problem with a Chinese company using my SMTP mail-server as outgoing mail server sending a lot of crap everywhere in the world. Can anyone help me with a firewall rule that can prevent "outsiders" from gaining access to my SMTP mail-server. Thanks in advance. Best ...

Hi nz_monkey, I've now tried with the original powersupply (14.9V & 500ma) and a variable powersupply (9V & 1000ma) still same result, a lot of pages loads immediately but just as many doesn't load when I've got the PPPoE client set up on the RB433AH (Ros ver 4.4). Still, if I set up the PPP...

Hello Mate,

Sounds like it is worth a try, but I'm still a bit puzzled why it works perfectly with a Laptop set up as PPPoE !

Will try to get hold of another power supply and try it out.

Thanks a lot for your suggestion.

Best regards,
Jens

Hi Everybody, Using a Draytek 120 Annex A Modem works fine with PPPoE connection is set up on Laptop, but NOT when using a RB433AH with PPPoE Client configured. When RB433AH is controling PPPoE client, only a very few websites will load, streaming is possible from some sites but not others. I.E. Mic...

Hi pjulian, Since you wrote the response below, we have started rolling out in other countries and a few Mikrotik questions has become like one million !! Now, my question is: The engenious solution you have spent a lot of time creating, is that by any chance for sale ? I'll tell you why, until now ...

Hi Guys, I've got a HOTSPOT with a RB532A on a Fixed Public IP address (xxx.xxx.xxx.xxx/24 on ETH1, and 10.5.50.1/24 on HOTSPOT) and a RB133 as AP on ETH2 (RB133 is assigned the Fixed IP address 10.5.50.2) ! The RB133 has been made binding (IP Bindings) and set up as a user, and shows up as active e...

Greetings Joe,

I would appreciate if you would send a copy of your scripts to me too, I'm still playing around with a few ideas.

Thanks in advance.

Best regards
Jens

Skype: onboardpartners
mail: j.kaersgaard(at)onboardpartners.com

Hi Bill, Look like you've tried this before mate ! Being absolutely new to Mikrotik (and no training courses yet) I'm a bit "up the creek" with this installation. I have now done the following: - changed the station IP address from bridge to Ether1 - deleted bridge1 and ports - setup DHCP ...

Hi Guys, I've got a RB532A (IP 10.5.50.1) setup as hotspot (with DHCP server) and a RB133 (IP 10.5.50.2) setup as AP-Bridge (ssid APtest). RB532A is connected to the Internet and Radius has been set to remove server. All boards has software version 4 and has been upgraded with ROS 3.9 MIPSL ! I woul...

Thanks a lot Paul, gives me good materiel to work from, I've got a lot of ideas, but I'm also very new to Mikrotik and the scripting (bought an extra RB 532A, so I've got a test environment to work on).

Your help is appreciated very much.

Best regards,
Jens

Hi Paul, I can see that you have been working on exactly the same issue that I'm facing, bringing the $(link-orig) to the status.html for a hyperlink (or just opening an extra window) for the client. Unfortunately I cannot completely understand your reply to Sergejs, can I ask you to please specify ...

Hi Everybody, being relatively new to Mikrotik and the Hotspot scripts, I have like a "fantazillion" questions. Here is just one of them, I think some of you specialists must have had similar ideas: I have changed my login.html to open status.html instead of the clients original requested ...