MikroTik

Coughy

thanks for the reply no im not expecting full production stability from a beta or even RC version, that's unfortunately quite naive im trying to see if the new rc fixs the issues so cheers for the limited reply And if you do run beta or RC version, you should expect things to not always act as you t...

Coughy

Ok so I have a question does the Mikrotik router need to be rebooted to make the changes take properly?? as in if I'm mucking with configurations settings like security or FT and or the likes do I need to reboot for the caps and router to take the settings correctly?? I'm chasing an issue and I can'...

Coughy

you are correct there is a QR code in the ip/cloud section called VPN Wireguard client config QRcode Hi Ammo reading the docs there is only one qr/code one can generate from the router itself, the rest if I read this right, is that you can easily create and manage additional Qr codes and send them a...

Coughy

great forum for fixing issues i had to do this as well from my isp now working

/ipv6/settings/set accept-router-advertisements=yes
/ipv6/dhcp-client/set 0 add-default-route=no
now i have working ipv6 on lan
thanks everyone

Coughy

delete/forget the wifi from manage on devices reconnect
enter passphrase again
also no wpa3 android not really like it

Coughy

Also, downgrading was a bit of a surprise. It would let me click "Downgrade" but nothing would happen and it would delete my downgrade files in the Files folder. The logs showed that downgrading was not enabled. If it's not enabled, it should probably tell me so I can correct it BEFORE it...

Coughy

It doesn't matter much. Well, if you do some traffic flow analysis (we can't do it for you), then you may discover some prevailing traffic directions (e.g. between wifi stations and NAS). And you probably want as little network hops as possible ... in average. Which, in case of massive wifi<->NAS t...

Coughy

Hi guys and girls i have my current setup network like the picture I'm wondering is this the best setup for the Capax as they are working out of the Hapax3 with injectors or would it be better with the Capax to be working out of the Managed switch with injectors?? or does it not madder? The Hapax3 i...

Coughy

Already filed bug report ? I haven't filed a bug report yet, how do I do that? I think this might be fixed, given this in the beta notes for the next version, I think they caught the issues with the certificates. This was in the release notes: beta717.png that's correct i have certs running now on ...

Coughy

certs working on 7.17beta
was broken on previous ros

Coughy

need to delete all certs in system/certificates delete all set caps to request cert from cap open capsman in wifi and set to auto on both CA CERT and CERT it should produce a new cert then you can go to the cap and see it there new 7.17beta fixed the cert issues wasn't working but is now i have all ...

Coughy

It seems that there is difference between security. And SSID (on purpose?). I would always make one item (per SSID) in /interface/wifi/security and use that on all interfaces. Because when specifying security items on /interface/wifi explicitely, it will override the selected security item. Can you...

Coughy

Ive tryied with and with out still same it has to be the firmware since 7.14 it is a mess and mikrotik cant fix it Hope that helps! # 2024-10-22 11:51:18 by RouterOS 7.17beta4 # software id = # # model = C52iG-5HaxD2HaxD # serial number = /interface bridge add admin-mac=18:FD auto-mac=no comment=def...

Coughy

i Just tried to add WPA3 via sec1 and apply to 3 of my wifi interfaces but it didn't work. What didn't work? I tend to perform an export when in doubt if settings are correct: /interface/wifi/export Alternatively you can use a wifi scanner for getting insights wether i.e. WPA3 is available. Fwiw, W...

Coughy

oh, right, I didn't think about the adlist. clearly if you tell devices to ask directly to the external DNS it didn't use the adlist rules.

all good i try it and found out some more learning and i learnt so very good now i know for next time or to help someone else cheers

Coughy

the latest beta show the band in wifi/registration but only what ap is using it and what not
it is getting better as they do more but yes it would be nice to have

Screenshot 2024-10-16 215159.png

Coughy

ok for thos who are playing along you cant do this way IP/DHCP/NETWORK/DNS as it wont work with adlist so i just found out mmm ok so i try a little more and this is the end result to make adlist work the other way works but adlist dont play the game and block the ads so it sort of works Screenshot 2...

Coughy

according to my understanding and the way I use successfully those configs, the IP->DNS sections is ment to tell devises what are the servers to use for "local" names resolving. In fact if I remember correctly it's configured out of the box with just the router's IP (eg: 192.168.1.1). The...

Coughy

i have similiar setup but a tplink switch instead but all mine work?? Are you telling me that your TPLink switch is getting a globally-routable IPv6 address from your gateway router, and that all of the wired-only clients behind it are, too? i just followed my isp directions like this then rebooted...

Coughy

hi as per the topic i have Hapax3 as main router then the 4 ports at the back of it are as follows ether1 is my internet in from ISP ether2 is running lan to a Capax ether3 is running lan to a Capax ether4 is running lan to a Hapax2 (all in Caps Mode) ether5 is my lan out to my switch (tplink 24 por...

Coughy

i have similiar setup but a tplink switch instead but all mine work??
wifi and lan so not sure whats happening here m8
i just followed my isp directions like this then rebooted

Screenshot 2024-10-16 124328.png

Coughy

This is all fault of MikroTik's leadership and decision making / vision. This "one product for everyone" agenda for ALL markets. The device hardware is quite decent, RouterOS is swiss-army knife with full features. This allows multiple use-cases, from homelab - SOHO/SMB/Enterprise/WISP/IS...

Coughy

Sounds like you are looking for DNS Adlist. https://help.mikrotik.com/docs/display/ROS/DNS#DNS-Adlist https://www.youtube.com/watch?v=RMJnjyAOfLI&list=PLXr-HoBo2VtU8eYamcgY8iUhRjO8JSh9U&index=13 no thanks i have the dns adlist running i wont to no if i can run multiple dns ip at once if you...

Coughy

Hi forum Gurus can some one tell me if this will work?? i wont to add numerous dns ips to the mikrotik like the adguard container does because im running the adlist on the mikrotik not a container anymore so i can pick the dns i wont to use as they are always different response times during the days...

Coughy

Active authentication type is shown in ROS 7.17+ registration table. What's new in 7.17beta2 (2024-Sep-27 10:07): *) wifi - show authentication type and wireless standard used by each client in registration table; like this very handy but only in latest beta as quoted here Screenshot 2024-10-14 154...

Coughy

good choice yer wpa3 is a mess

Coughy

Ok my first question is wpa3?? can or do the devices that wont connect support WPA3? it is new and not the good pls try wpa2 only and reboot see what it does i have devices that wont connect when wpa3 is active i think mikrotik still need to work on this There are SSID"s on the AP's, how would ...

Coughy

On this development testing Why cant we have the update broken down in to smaller manageable updates like the list is so long to be honest I'm not interested or wont to no about 1/2 of it but some do so why Mikrotik team cant we break the updates down in to like 3 or 4 sections and use the developme...

Coughy

But it is still problem even if I switch off WPA2. It seems it is ok only if WiFi interface of Chateau 5g AX is using WPA2 (when WPA3 is off) then 2,4Ghz works. It must be something in 7.16 (I think 802.11h is the reason) - in 7.15.x it worked perfectly go to interfaces and check if wpa3 is on in s...

Coughy

we don't have a crystal ball m8 you need to post up your config so we can have a look at it to help

Coughy

It's a beta. Issues are to be expected. If it doesn't work properly for you, just downgrade and maybe try the next beta. So you Don't read the forums?? there is literally everyone complaining about the AX series in everything Mikrotik so we are all trying to get a fix and get the working hardware w...

Coughy

Hi anav i no this is a old post but someone mentioned on the forum that you did a step by step guide to setup vlans on ros?? is this true and can u point me to it as i cant find anything im new to vlans and would like to try and test it out cheers pete Hahah, Yes I will eat humble pie, I only looked...

Coughy

Please Team Mikrotik can we have a new tester firmware for the AX devices to some what work with AX CAPS in CAPsMAN the reauthenticating errors and disconnects are getting annoying and shouldn't be there as we cant use the full functions on the devices. PS yes i do have wpa3 disabled but why should ...

Coughy

You have to run system/device-mode/update downgrade=yes and press reset button or cut power.

ah thought it was that Thank you for the command i will keep that in my command book cheers pete

Coughy

ok so as per my other post i have been playing with ros combinations i have come across a issue that i can do can anyone show me or like me a good video on how to downgrade ros from 7.17 please??? if im on say 7.16 i can open up winbox drag drop over the 7.14.3 ros to the files folder then drag and ...

Coughy

Hi im wonting to no if i can change/downgrade firmwares?? ok so im on 7.16rc4 on my hapax3 and i have 3 caps running 7.14.3 they seem to be running ok i have been trying and trying to get this ax stuff to work nice and i spent the good part of 7hrs yesterday tweaking and mucking around in importing ...

Coughy

i have a hapax3 and a hapax2 all woring correctly on 7.17.beta2 must be config issues you have got wipe unit and start fresh Were you able to get to the bottom of this? I have a new hAP ax^2 (no USB) fresh out of the box and there's no 2.4GHz AP visible. I've fiddled with all the things you mention,...

Coughy

Ok so first off why running 2 different wifi ssid for ax and n on the 2.4G and why runing 2 different for the 5G why not just run the ax on both with bigger channels to choose from like first of let it be auto picking have you looked in the area of the wifi to see if any channels free to use from in...

Coughy

old post i no but get one of these in 32g works perfetly on 7/17beta2 running my containrers and no wofo issues

Model Number: SDCZ430-016G-Z35
SanDisk Ultra Fit USB 3.2 Flash Drive - 16GB

Coughy

no i was running 7.16 no issues with capsman and 4 capax so it is some thing that your config isnt right
do you have the correct wifi drivers installed
do you have a export of the config so we can have a look pls

Coughy

check your logs if you have dude installed i just got a warning that IP 172.169.6.6 tried to log into my dude via winbox now thats in amsterdam so the hackers are out and about lucky the firewall did its job and denied that but WHY what is happening mikrotik i have never had syn flooding from ros be...

Coughy

you need to give us more information m8
is this a new setup?
did it just start after a few days
is it a new firwall testing process
we are driving here blind
looks as a firewall issue but what im not sure no info

Coughy

you cant as far as im awear run two isp in to the mikrotik at the same time use port 1 fromn the isp next issue is the mikrotik cant be a dhcp after the isp router when it is set up as dhcp need to make isp router in bridge mode then the mikrotik can run your dhcp and the sub net you wont to run it as

Coughy

in your log do you get HapAx3_5Ghz detect LAN if you have that active??
seem to show up every 3 hrs or so only the HapAx3_5Ghz detect LAN no other interface does it

Nothing should happen, on my ax3 everything is working. Do you have an issue ?

Coughy

nothing it works fine nothing to do with containers unless you have different partitions for them but most run on usb??

Please, what will happen to the running containers after the update to 7.17?

Coughy

i have lots of screen shots to show you but i wont do it here on OP
m8 go to wifi config and put DTIM period up to 8 on the 2.4 and 3 on the 5g try it works for me i get hardly any disconects now
if not i will do a new post with my config so you can try my settings

Coughy

is yours 2.4 or 5g??
as i was having same problems but i dont have hardly any anymore
im on the 7.17 beta but i had it working and roaming before this beta
i found it is the 2.4 that seem to be having all the issues
but i hardly get any now with my config changes

I have same issues

Coughy

cheers My GURU did the address list version see if i did it correctly and if it works for me lol so far it is give it a couple days to test more but ty for the help thats above my pay grade i have created a drop to wan like this add action=drop chain=input comment="Blocked ports" protocol=...

Coughy

multi-passphrase is not supported for the WPA3-PSK authentication type. *) wifi - added multi-passphrase (PPSK) support (CLI only); any documentation ? example ? https://help.mikrotik.com/docs/display/ROS/WiFi#WiFi-SecurityProperties Scroll down / search for "multi-passphrase".

Coughy

ok so fun fact i dropped to wan these ports guess what i cant log into the router via winbox with the ip address?? i can only log in via the mac id so it is winbox trying to open /connect to ports in the router i disabled the ports i was dropping to wan and i can now log in to the router again with ...

Coughy

cheers m8 yer i added these ports just never seen them before cheers Wow! This is an another great release, congratulations to the whole team! --- *) bth - improved stability on system time change; Is there any info on cases when this can cause crashes? We observed some hangs and it appears to be re...

Coughy

hi Gurus what is this?? i have never had this before until i upgraded to this beta 7.17
Possible SYN FLOODING on ports?
shouold i be worried or is it normal
Did my internet just try and refresh a ip from my ISP? dont no what it is

Screenshot 2024-09-29 121923.png

Coughy

you need to share your config file m8 so we all can look at it to help

Coughy

i Just had the openvpn as well what is it? and why did it get intalled and enabled?? i had possible SYN flooding on tcp port 2828 this is why i went looking for what and why and how havent looked at zeroter yet as i dontr have it installed nor do i use it I've just upgraded my RB5009 , hAP ax3 and h...

Coughy

Up dated all my AX hap and cap devices with firmwares all seems to be working so far but early days Should i wipe out my wifi config back to default with only ssid and passphrase intalled and test it?? as i have changed a few things from previous ros to get the ax to play nice or should i leave it a...

Coughy

how is the ax devices going with the wifi and roaming guys?

Coughy

running 7.16.rc4 , runing 7.16.rc4 firmware no sa querys, time outs or really any of the sort like it used to yes i do get a couple disconects but noithing like what it use to be like no real issues at moment , i did have the authentisicate loop bug but i have got that to dissapear hapax3 , hapax2, ...

Coughy

i have roaming working and no sa timeouts
and very little disconects
i have been playing with the config for minths now and i think i have it working pretty good
this is the best i can get it

Screenshot 2024-09-25 153727.png

Coughy

I have downgraded to version 7.15.3 and still the same problem do a complete new config i found jumping around firmwares and allpy config has a bug that it does things like this im running hapax3 , hapax2 and 3 x capax all on 7.16.rc4 all fine to a degree with roaming and very little disconects try...

Coughy

Lets hope so as the ax and wpa3 is very unstable no matter what device and config you use Lots of annoyed and frustrated customers filled the forums with so many issues lets hope the next round still waiting for has the magical fix that a lot of us are waiting on 1 ros works for some and not others ...

Coughy

wow 3 weeks and only this i have to say im a little disapointed and no AX any thing mmmm
feeling left out

Coughy

ah here we go the channels you have here are a low power for europe pick the 5470-5660 ch for your area there more power and i get better signals from the higher freq Always check the allowed TX power for your country! Make sure that low power frequencies cannot be selected . Low power (SRD) frequen...

Coughy

ok first of im not a expert just looking at your config and results u live in denmake correct? what channels are you running on your 5g?? please look here as the lower channels that i think u are using are very tx/rx limited for you contry region https://en.wikipedia.org/wiki/List_of_WLAN_channels n...

Coughy

post up your config as im running hapax3 and all is good sounds like a config issue prob looking for dfs channels
and what freq range u have for the 5gh??

Coughy

i was trying to get the hapax2 to poe power to a capax but couldnt get it to work i have used a injector and changed my set up was just trying to understand what was happening so the hapax2 is poe in and out correct? the capax is poe in but wouldnt turn on not sure if i had it correct just trying to...

Coughy

can u elaborate a bit on this please? as i have a hapax2 as well and couldnt get it to work as a ap i have to use an injector from my hapax3 i understand active poe all good but passive im not understanding i watch some docs and videos so it can only support what it is so 24 to 24 and so on but i pl...

Coughy

next installment no my changes didnt fix this over night it is back Screenshot 2024-09-12 151835.png This is what i have so far and seems to be working some what ok Edit 2.4Ghz is roaming just seen it just slower than 5Ghz to show it no roaming from 2.4Ghz tho that i can see so far not to really con...

Coughy

This is what i have so far and seems to be working some what ok Edit 2.4Ghz is roaming just seen it just slower than 5Ghz to show it no roaming from 2.4Ghz tho that i can see so far not to really conserned tho with the 2.4Ghz as i only have a few to connect to that that have to every thing els is 5G...

Coughy

Can you post your configuration ?

i think i might have some of it working now but sure
is it
/export hide-sensitive
then copy and past here
or like this
/export file=config-7.16.rc4 hide-sensitive
which would u like ??

Coughy

hope so sooner rather then later as im having a horrible time with these ax devices for months now cant get it working properly Did you open new topic, maybe someone can help you ? no ive read all i can find here and everyone has same if not similiar problems it is the roaming / steering / disconne...

Coughy

hope so sooner rather then later as im having a horrible time with these ax devices for months now cant get it working properly

Coughy

are we getting a new rc soon? hopefully fixing some more AX problems please

Coughy

ok gents and ladies gurus what does this mean i get it all the time from mt to ap on the lower side of my house Screenshot 2024-09-12 151835.png is it bad? is it working when it does this? is my config wrong? is the ap to far away from each other? ive been tryinf heaps of settings but it keeps comin...

Coughy

thanks you normis and sindy yes that is what i have done i have been testing settings and i think i have found a querky senario with the security settings more testing is in progress looking for the culprit in the wifi debugging SA Query timeout, signal strength -62 and or 2.4g reauthentisaction loo...

Coughy

Hi ladies and gents is there a script or a command line i can use in new terminal in winbox to find out the current config name that i just restored a few hrs ago as i have been testing a few things and had to restore a config but i have a few in the file section and i dont remember which one i used...

Coughy

my first guess would be have you tried turning off wpa3 and rebooted? i have a few devices that wont connect when it is enabled? also i wouldnt be sharing your key add allowed-address=192.168.216.3/32 comment="luogo" \ interface=back-to-home-vpn name=peer2 public-key=\ "<edit>" o...

Coughy

i had simillar issues i did this and it worked was a muck around for a few minutes bit i had to do it couple times Mikrotik Factory Reset Guide Disconnect the power cord from the unit. Hold the reset button and do not release. Plug the power cord in and wait until the ACT light starts flashing. Now ...

Coughy

download the arm related to your device you wont then u have to download the packages to suit i had simillar issues but i wasnt using all the packages and it woouldnt update i then used all the packages and it worked
must be same packages as the os
same situation if you wont to downgrade

Coughy

Don't worry about root port, it doesn't matter in this case. when i reboot the hapax2 it kicks me out of winbox/reboots the Haxpax3 main router?? are you by any chance connected to this main router through the wifi network that is provided by this hAP ax2 controlled AP? when it reboots, you will lo...

Coughy

You can download basically any RouterOS version from our upgrade server. Just change the version number in URL.

https://upgrade.mikrotik.com/routeros/7 ... -arm64.npk

thanks so much appreciate it cheers

Coughy

Hi ladies and gents i have a question regarding my setup on my HapAx3 running 7.16rc2 , this problem has always been this before the latest rc2 os i have a hapax3 as my main router and i have capax connected to the 2 and 3 lan port all good no problem next i have a Hapax2 in capsman mode running on ...

Coughy

hi guys is there anywhere i can download 7.16rc1? as i try rc2 and it has a bug i dont like wont to reveert backl to rc1 but i didnt download it i just upgraded from cloud

Coughy

if you use "local forwarding" in your datapaths, try unchecking it

thanks but i cant see any local forwarding in data paths?? there is no option for it??
where and what should i de looking for?
all these devices are caps managed by capsman

Coughy

hi team is this normal?? device is a hapax3 latest 7.16rc1 im in the interface list and i wonted to see the lan ports tx/rx as this is where i have my caps connected port 1 is wan port 2,3,4 have caps connected port 5 is my lan to my switch i can see the wan and port 5 tx/rx but the other 3 have wor...

Coughy

i did read some where that aguard is a bit hungry on resources ?? and was a routeros issue but i think that was earlier routeros?
maybe pihole is the one i should be using as it uses less but i like the adguard features more tho
testing testing testing i think is needed

Coughy

cheers m8 i just tried that terminal command that you posted and no good for me the ram dropped to 35mb left so i stopped it dont no whats going on there but i still havent got the usb 3.2 yet so i will try when it gets here again the cpu usage was higher at 40% so not sure i just put is back to 500...

Coughy

is it normal to start the container(adguard in my case) and it eats up 400mb of ram?was 630 drops to 180ish never noticed before i only have about 180mb left is this ok for the routeros to perform as needed?? and not go laggy or shut down or anything as im chasing a internet problem as i think it ha...

Coughy

not sure mate as i have a 3.1 usb3 now at 100mb speed but i think it is the problem possibly so wont hurt to order a new faster ones i think i will just use adlist for the time being and wait for the new 3.2 only a week or so away so all good i have the adguard container running but nothing going to...

Coughy

i just found 3.2 on amazxon and it is a lot faster 3.2 is 400mb highest and the 3.1 is only 130mb so mmm i will have to order over seas but i will get the 3.2

Coughy

thanks for the reply i was wondering if they usb type and speed might play a part in this so i will go find the same as what you have and try it as it works for a day or 2 then i start getting slow internet and so on but today it wouldnt even start the adguard that was on the usb3 it is a 32gb verba...

Coughy

Hi guys and girls just a quick question is there a specific type or speed of USB3 jump drive to use? Like make and size? As i have been having alot of troubles with the container running pihole or adguard after a few days it stops or just drops out randomly but usually comes back on line but thus pa...

Coughy

hi gurus is this the same thing in the latest beta?? as I'm on the 7.14 stable and trying to find out what I'm looking for as a fix to test if these fixs are helping me or not dhcp - improved DHCP IPv4 and IPv6 client/relay/server underlying interface state change handling; as I'm having trouble wit...

Coughy

i just had a email from my isp telling me that the internet drop outs have significantly reduced after reverting back to the 7.14.3 routeros and firmware so lesson learnt latest isn't always the best

Coughy

well guys i can confirm that the 7.14.3 has all but fixed the wan dropouts I was having on the hapax3 after I worked out how to do it properly lol but yes all seems to be good now wifi works as intended on both 2.4 and 5g and no dropouts and wan trying to ask the ISP for a new IP address every 1hr o...

Coughy

just my 2 cents worth im not as smart as these guys and girls but what firmware and routeros are you running OP?? I have a hap ax3 and the 7.14.3 is the best routeros and I have had very similar problems as you the later 7.15 and latest betas have broke a lot of usability for me anyhow on the hap ax...

Coughy

Hi Mikrotik gurus i have a strange problem with the 7.15 stable and the betas out at moment I keep getting drop outs from the wan lets say I have IP address of 23.24.25.237 my internet runs fine but he wifi doesn't seem to refresh when opening up pages on facebook or web browsers I do a speed test a...

Coughy

Hi guys and girls i know this is a older thread but pls help I have a hapax3 I am on 7.15.2 routeros and wont to go back to 7.14.3 I cant do it the mikrotik wont let me go back what am I doing wrong?? i have followed the online videos and done as they state but every time it reboots it is still 7.1...

Coughy

Hi guys and girls i know this is a older thread but pls help I have a hapax3 I am on 7.15.2 routeros and wont to go back to 7.14.3 I cant do it the mikrotik wont let me go back what am I doing wrong?? i have followed the online videos and done as they state but every time it reboots it is still 7.15...

Coughy

hay it is dhcp from a HFC connection here in Australia from a NTD to my router on ether1 port

Coughy

Hi all as per the topic my isp gives my hapax3 a dymanic IP I don't know the time frame but it seems to keep the old IP until I login and release the IP is there a way to make the hapax3 release or refresh the IP from my provider with out me doing it?? as I can tell when it needs to be done the inte...

Coughy

im no guru but do you have a pool for that IP for the vlans??
that's the think that sticks out to me looking at your config on main router
As I said I'm no expert learning as you are

Coughy

Thank you, all of you. I can see the TX power now! It will disappear if the wifi window was closed. And, there are 2 TX power columns! That's weird enough. Before hap ax3, all my devices were V6. It took me lot of time upgrading to V7, especially the wireless part. It had changed so much . Before V...

Coughy

only thing you get on ax in tx power is this

tx power.png

Coughy

no i dont have it enabled or it done it self in the back ground I just logged into each cap rebooted it into caps mode logged into the main router went to wifi/cap enable capsman adress127.0.0.1 discovery interfaces all then wifi remote capsman enable interfaces all and it was working setup your con...

Coughy

do you have wifi or wifi-qcom on the caps?? like this packages.png I have 2 caps running and a hapax2 running from capsman have you logged into the caps separately to see there config and reboot them into capsman mode and on main router setup capsman should look like this maincapsman.png and the cap...

Coughy

ok im only new here mate but I don't think you can have just packages you need to tell it where so like /disk1/ here watch this video it is very helpful from mikrotik youtube channel https://www.youtube.com/watch?v=1Ct6aJXTE5g In the video, he is installing it from a USB drive plugged into the rout...

Coughy

why not just log into the cap and use update?? straight from the cap??
in packages

Coughy

THX guys I handeled the situation by downgrading to 7.8. wifi is on and broadcasted the SSID. its funny that in 7.15 with qcom package i could see both wifi interfaces but without broadcastin the SSID. I dont know what is wrong with hap series products. i have never seen anything like this in other...

Coughy

i dont know what yours is doing but I did this to my ax3 and works just fine all installed and wifi working?? mine says home ap dual up the top left drop down after I did this reset at the first boot I thought was a little funny with the config so I wiped it and rerset it like this Mikrotik Factory ...

Coughy

just want to see which AP is getting used and by who and what bandwidth and speeds are like the interface list but in the wifi section interface.png You get most of this info on the "Registration" tab. thank you just wont to know what device and how much on what ap that's all i will just ...

Coughy

https://help.mikrotik.com/docs/display/ROS/WiFi#WiFi-WiFiCAPsMAN WiFi CAPsMAN can only control WiFi interfaces, and WiFi CAPs can join only WiFi CAPsMAN, similarly, regular CAPsMAN only supports non-WiFi caps. The CAPs don't send traffic usage information to CAPsMAN. cheers mate that helps I'm aski...

Coughy

i have same phone and same ap no issues has to be the config

Coughy

ok im only new here mate but I don't think you can have just packages you need to tell it where so like /disk1/
here watch this video it is very helpful from mikrotik youtube channel

https://www.youtube.com/watch?v=1Ct6aJXTE5g

Coughy

Hi all and thanks for this forum I've learned a lot I'm new to the Mikrotik but love the functionality of it for such a small device it packs a punch coming from a retail Netgear and Dlink this Mikrotik rocks cheers. I have a hap3AX as my main router and then I have 2 capAX and a HapAx2 running as A...

Search found 114 matches