I tried to set inner queue's to priority 7, but this did not have any effect. Again thanks for all your efforts uptil now! Here are the exports from my mangle queue setup: / ip firewall mangle add src-address=:119 in-interface=Internet protocol=tcp action=accept \ mark-flow=DL-NNTP comment="&qu...

High P is set to 1
Low P is set to 8
The rest is set to default 8

Thanks for your reply ! I tried your suggestion but it didn't have the result I was hoping for. I set Limit at 1mbits. I started a download job in the Low Priority Queue, this job is taking 100% of the bandwith. Then I started a Second download job in the High Priority Queue. The result can be seen ...

The setup below is working fine, but I have a 2-8mbps ADSL line and my bandwith is variabel between 2mbps and 8mbps. The setup below works like a great, but only when Max-Limit of Queue ALL-DL < Current ADSL speed. I could set Max-Limit to a low value that's always true, but offcourse I would like t...

Ok,

I will not spend any time on the feature till futher notice.

Thanks !

Is there someone how's succesfully setup 802.1x authenticatie? Is this feature fully implemented ? Because i can't find any documentation on this feature except the 802.1x-mode=PEAP-CHAPV2 switch. What I would like is some samples and steps on howto get 802.1x / AES / WPA / etc. working on a MT 2.8....

Is there someone how's succesfully setup 802.1x authenticatie? Is this feature fully implemented ? Because i can't find any documentation on this feature except the 802.1x-mode=PEAP-CHAPV2 switch. What I would like is some samples and steps on howto get 802.1x working on a MT 2.8.11 AP with atheros ...