MikroTik

fe4r

disable one by one and see from which interface is coming In my network also happen this kind of stuff, it can be cause by a virus or broken cheep switch and etc etc just find from where the problem is coming Thank you about the answer. This happens in all my network. I already disabled one by one ...

fe4r

Hello, I have a problem in my networ that runs with bridge configuration in the devices. The first image (network.png) shows the network topology (but imagine more 30 sites in the network and same bridge). The link comes to a site and goes to a MK (RB450g) that filter layer2 and layer3 (accept APs m...

fe4r

anyone?

I wnat know it for x86 too.

thanks.

fe4r

I need do the same, some result? Well, I've found this ugly solution which works for me, but it may not for you. It is based on /port remote-access which allows to log serial console ... /port remote-access add allowed-addresses=0.0.0.0/0 channel=0 disabled="no" log-file="tm.dat"...

fe4r

I need do the same, some result?

fe4r

AFAIK, RouterOS does not understand more than one Mikrotik-Address-List attribute

if you need it - write to support@, as Janis said on EU MUM a year or two ago

thank you about the answer.

I sent to support it, lets see..

fe4r

Hi there. I use here freeradius with PPPoE. So I was trying do some alerts to some clients with Address-list (Mikrotik-Address-List attribute in the Radius). But, we could see that a client can't have more than onde Address-list created by the radius in the PPPoE authentication. This is a issue with...

fe4r

As others have noted, you have bigger problems than stolen passwords, if somebody just comes and takes your router. Start with those issues first. Sure, we are solving this issue. But i still think something in RouterOs could be made to make it harder to get passwords. I tested the command to stop ...

fe4r

If you don't want them to be able to perform a reset...
Code: Select all
/system routerboard settings set enable-jumper-reset=no 

so, this disable the manual reset (jumping the contacts)?

fe4r

I already use: 1 - big, hard and different passwords each device. 2 - radius authentication (but, MK needs a full user in its user database) 3 - lock in devices boxes (now i'm improving it) 4 - different port for winbox access and access from just some IPs (and the other services too). what else may...

fe4r

I didi everything you said, the problems were "solved" but i think this is a big vulnerability that is so much visible (there is a website to do it!!!). The question is the facility to do this, just 3 minutes they do this, and we think it was just a reboot problem e it's ok. I think Mikrot...

fe4r

Hi, I don't know if this was already told here, but let's go try. I'll explain a problem that I'm passing and I think Mikrotik's developers can solve it. There are some people going my towers and other places that I have Mikrotik, they open our boxes and reset a Router Board manually. After, they ca...

fe4r

This was a video of some MUM, about cpu configuration in ROS 5.x.

This didn't work for me, but the real problem was bridge configuration. When I changed the root bridge here, this problem was solved (in some places, I changed rstp to none in the bridge protocol).

fe4r

Hello, What Mikrotik version is working with proxylizer? Here, I didn't need to change the webproxylogtomysql.php, but in webproxytodb_debug.log shows that: 2011-04-13 19:18 | Invalid IP address!!! 2011-04-13 19:18 | Invalid IP address!!! 2011-04-13 19:18 | Invalid IP address!!! 2011-04-13 19:18 | I...

fe4r

The Mikrotik Support only said to analyze this video (I already opened 2 tickets):
http://www.tiktube.com/index.php?video=363

Nothing changed after these informations.

fe4r

Talking about RB1100 and PPPOE. I have a serious problem running PPPOe on my RB1100 where the problem seems to be related to MTU and MAX MRU. the users can connect and gain access and ping is working fine. but browsing is not working properly. Websites does not open some times, and some pages open ...

fe4r

Now I have 3 pppoe server in a Switch.
2 HP server and a RB1100. The Rb1100 i can't connect more than 300 sessions because of the cpu load higher than 80% and get 100% when I open some informations.

I have no problem now, just the rx drops in the servers.

fe4r

i have no idea how to solve this problem yet, but it's not bothering me anymore. I have changed intel ether for realtek and the problem remains, so i think HP it's not the better one to do this. And now, i can't try another brand.

How about you?

thanks

fe4r

i would like to know about the rb1100 maximum bandwidth too. I'm using for PPPoE Server, 2 HP ML110 2.4GHZ quad-core 2gb ddr and they are stoping with 800 sessions. When they have 400 in each, there's no problem. I use radius and dynamic queue in these server (firewall just have the tcp mss change r...

fe4r

Someone figured out how to solve this problem?

Thanks

fe4r

here, i solved it changing all the hardware. With another dual core, i don`t have the problem, and with a quad core too. I think the first dual core, there was some problem with motherboard. but what brianchrist said is true, about the cpu. I`m using the Ros 5.0 now, and it`s so good and stable. tha...

fe4r

so, it worked?

fe4r

i have intel here too and one of the ether shows rx drops 5 in 5 minutes exactly. the proc is a dual core. if i set the /system hardware set multi-cpu=no, it can get better? thanks no. keep multi-cpu=yes if your mikrotik detect 2 cpus, just make sure the load is below 50% otherwise it will start dr...

fe4r

i have intel here too and one of the ether shows rx drops 5 in 5 minutes exactly.
the proc is a dual core.

if i set the /system hardware set multi-cpu=no, it can get better?

thanks

fe4r

i have a problem with so many bridges here. The root-port. I don't now how mikrotik choose a root-port. How is this?

because always it chooses the wlan port, so when it's down, i can't access the rb.

how can i solve it?

thanks;

fe4r

Good afternoon all,

I want to discuss with the all of you, what is the best way to config a small network, with about 60 mikrotiks and about 30 places with constant growing.

Bridge, routing, ospf???

What do you think is the best way?

thanks all

fe4r

nest,

can you pass your email to contact you?

thanks

fe4r

hi..i have the same problem "nest" described. My netwrok is just bridged and i have so many lost and stops.

For a little big network, we can say about 100 routerboard and 2000 clients, what is the better way to configure this network?

thanks

fe4r

check your settings, these cards are capable of 40MHz channels and they should work.

i have the same problem with UB5 cards.

When i done a downgrade to 3.30, with a reset configuration of the card, the 5ghz-turbo shows. I've tried the same with 4.2 and no success.
i'll make more tests.

thanks.

fe4r

i would like to know too if the 4.2 version has support to 40mhz on 5.8 cards.

i've tried the Ubiquiti Xr5, and the 5ghz-Turbo isn't there and with 3.30 version, there is.

thaks.

fe4r

in my lab tests, i got about 30mb full-duplex.

outdoor (about 2km) i got abou 20mb full-duplex

but now, with 12km, the link is like marmellata link.
i have to see the antennas.

give more information about it

fe4r

no one?

fe4r

Hi.. i have a mikrotik 3.28 in a computer, routing for a office. I'm using l7 to filter msn, pages e others. and in some clients i'm using hotspot for a kind of login. but, the l7 filter in /ip firewall filter, just get the ip bindings clients of hotspot. those who loggin, don't work. what can i do?...

fe4r

hi, i'm new here, but i work with mikrotik since last year.. i need a script with the ack-timeout, but i can't do it..i'm studyng the script lenguage 2 weeks, but the scripts dosnt work... i need the script see the ack-timeout of every connected clients on registration-table, if its higher than 50, ...

Search found 34 matches

Re: bridge flood data all ports

bridge flood data all ports

Re: Bridge hosts/MAC address table limit?

Re: Serial-terminal output read from script

Re: Serial-terminal output read from script

Re: Mikrotik-Address-List and Freeradius

Mikrotik-Address-List and Freeradius

Re: Password Recovery website

Re: Password Recovery website

Re: Password Recovery website

Re: Password Recovery website

Password Recovery website

Re: RX drops

Re: Proxylizer not working with WIKI configuration - NEW PRO

Re: RX drops

Re: RB1100 as access control PPPoE, how much capacity?

Re: RX drops

Re: RX drops

Re: RB1100 as access control PPPoE, how much capacity?

Re: Single port network loop/storm protection

Re: RX drops

Re: Dell PowerEdge r210

Re: RX drops

Re: RX drops

Re: Bridge designated port - root port - disabled port

Best config in a medium network

Re: WDS bridge traffic bug/problem

Re: WDS bridge traffic bug/problem

Re: SuperAG Features in routerOS

Re: SuperAG Features in routerOS

Re: wireless configuration problems r52n

Re: Hotspot clients and layer7 don't work

Hotspot clients and layer7 don't work

Re: Compare the wireless ack timeout?