Set for this wireless bridge bypass hotspot and then you will be able to access it.

Read section: Bypass hotspot for some devices in hotspot network
http://www.mikrotik.com/docs/ros/2.9/ip ... #7.41.17.1

If you do not need forward port in local network then use only masquerade:
http://www.mikrotik.com/docs/ros/2.9/ip ... t#6.36.3.2

For port forwarding look at this example:
http://www.mikrotik.com/docs/ros/2.9/ip ... t#6.36.3.3

For bridge wireless with ethernet use WDS.
You can use nat but you will not see client address in main router.

Look like WDS link is UP.
If you want to make it as transparent bridge then you need to add WDS interface in Local bridge and not to make new for them.

Or If you want to provide roming through wireless then you need add into bridge wireless interface. ( in your case Omni1 and Omni0 ).

It would be better to see print or export from wireless configuration to understand better your setup.

I think you do not need use EOIP becouse it make bigger overhead.

If you have set "default-authentication=no" you need to add remote wds-mac in "connect-list". New dynamic interface should appear under "/interface" and "/interface wireless wds" Also "ssid" and "Frequency" must be the same both Access Poin...

If it is your access point then turn on WDS or ask to do it owner of access point.
Otherwise you can use natted network or ask to your ISP route Public IP through your router.

I suggest you to use WDS instead of EOIP becouse with EOIP you will have bigger overhead.

/ip firewall filter add action=accept src-port=123 protocol=udp src-address=x.y.z.a chain=input comment="Allow the router to request NTP synchronisation with an external time source" /ip firewall filter add action=accept dst-port=123 protocol=udp in-interface=local chain=input comment=&quo...

Please send support output file from router to support@mikrotik.com to see your whole configuration.

It is impossibility to detect from first packet if it P2P or not so it is generaly.

You can not mark first packet for P2P traffic that why you can not route it to different ISP.

I suggest you to route all P2P traffic to default gateway and everything else to different.

You can do dst-nat to different port for example: [admin@MikroTik] ip firewall dst-nat> add dst-address=10.5.8.104/32 dst-port=80 to-dst-address=192.168.0.2 to-dst-port=23 protocol=tcp action=nat In 2.8 version with hotspot you need to add for this rule hotspot flow and it must be before redirect ru...

I suggest you upgrade your router to latest version.

It seem you have no activity with access point when your client is disconected. Access point thinks that client is dead and kick out from his list.

It look like that it is not Mikrotik RouterOS access point.

This is good example from manual. All address which are not in arp list can not access internet.

http://www.mikrotik.com/docs/ros/2.9/ip ... t#8.42.3.5

I suggest you to use web-proxy test package. You need to uninstall web-proxy package before you install web-proxy test package. Question 1: This is link from manual for web-proxy package access list: http://www.mikrotik.com/docs/ros/2.9/ip/webproxy.content#7.53.3 There is example for web-proxy test ...

What size and brand of Compact Flash you are using?


Martins