Here are my complete capsman and cap configs. Capsman config: /interface wifi channel add frequency=2412,2432,2472 name=2GHz-channel width=20mhz add frequency=5170-5250 name=5GHz-channel width=20/40/80mhz /interface wifi datapath add bridge=edge-router-bridge name=admin-datapath vlan-id=101 add brid...

Thanks for the reply, @neki. I did check my capsman config and I definitely specify vlan id in my datapath configs on the capsman side (I’ll post this configuration as well, but am away from my home). I can see that capsman has set the correct PVIDs on the WiFi interfaces in my bridge even. I tried ...

Thanks for this. I was struggling and I think this got me close. My cap comes up, I see it in neighbors, I can reach it in Inbox from my admin vlan. But while all of the wifi interfaces are provisioned, set with the right PVID, and enabled, No devices actually connect to the AP. Here's my config for...

Whelp, success! I wiped the cAP AX and put no default config on it. Then used my config almost entirely as you saw it and....it just works. Lesson learned about not using any default config so you know exactly what's going on. Thanks for steering me back to that post! It forced me to re-validate my ...

Well, as long as the bridge doesn't have VLAN filtering enabled, this won't work. Have a look at this great topic for all your VLAN questions (and answers): https://forum.mikrotik.com/viewtopic.php?t=143620 This is a good catch and one I was actually trying this morning. I turned on VLAN filtering ...

The first I spotted: bridge ports need pvid assigned

Interesting. So on my switch and router I’ve left PVID set to 1 based on some example vlanning configs and docs. Can you help me understand why I need to change PVID here but not elsewhere? And which PVID to set on which bridge ports?

Hi, folks. I'm very new to Mikrotik but not too new to networking in general. I have a CCR2116 and a CRS328 configured to replace a ubiquiti setup I've been running for years. I have a trunk port between those devices configured on a bond, and am using VLAN ID 101 as a base VLAN. I've gotten DHCP wo...