MikroTik

binhorp

In this case there should be a notice advising of such problem, specifically acquired the hardware for this and the worst bought a ccr-1036 that has the same problem.

binhorp

Hello everyone, my ccr1016 can not balance the use of 16 cores, semre has one that is 100% this has caused me some problems, I would like to know if there is any solution to the problem. The scenario this as follows: 02 sessions bgp fullroute one bonding interface and 1GB traffic approximately firew...

binhorp

Found 03 mac-address the port on my router the neighbor router and a mac reset FF: FF: FF: FF: F, I could not FIND anything relevant, one thing I noticed is that the traffic is bound to vlan- ID = 1 and could not find ways to block this traffic, and the situation only gets worse as you can see in th...

binhorp

I set any direction and Ether1 interface

binhorp

the packet sniffer can not find any package but the interface has a traffic of 68MB.

binhorp

I could not identify mac-address that create this traffic out, what I could do to discover?

binhorp

I thank all the answers, this problem is taking me sleep, still have not found ways to trace the source of this traffic when q happens nothing can bar it unless removing the network cable. the graph below shows the times when the traffic occurs.
Very grateful to everyone!

binhorp

Hello everyone, I am experiencing traffic problems in the ethernet port on the protocol 814 randomly happens as if it were an attack, using the touch tool, I see that all traffic comes from Protocol 814, anyone know how to block this traffic?

binhorp

Problem in Groove A-52HPN with all the LEDs lit sign
Hello all, I have several units of the Groove-52hpn with this problem of lit signal bar can not reset, can not recover at netinstall, is there any way to recover them?
Thank you all!

binhorp

Hello everyone, I have a rb1100ax2 to closing a BGP session with my provider link, I get my ips ok, I need to announce the block from my client, anyone have an example that can help me?

binhorp

Hello everyone! I wonder if working with pppoe MTU in 1500 and cause some kind of problem, after a week of problems with some websites that do not show images, our supplier link pointed as a solution to replace the pppoe server MTU to 1500 is that this value is correct ?
grateful for your attention!

binhorp

I'm having some problems with akamaihd.net, akamai.net in some cases the problem is solved only put dns manually on the network card of the PC, someone else is experiencing this problem?

binhorp

Many thanks for your rextended explanations, just like I used 8.8.8.8 symbolism in my settings so always use / ip dns servers = x.x.x.x September, y.y.y.y x.x.x.x, y.y.y.y are my dns. I'm having trouble on some sites, especially facebook not showing images I found something strange in the dns cache ...

binhorp

Good morning everyone, I wonder if there is any difference in practice between the following options dns:
/ip dns set servers=8.8.8.8
/ip dhcp-server network set dns-server=8.8.8.8
/ppp profile set dns-server=8.8.8.8

right now I am very grateful for your attention!

binhorp

Good morning everyone, I'm having trouble removing the pppoe users by php api'm using the code below, the browser crashes and only returns when reboot apache, someone could help me? very grateful to all $API = new routeros_api(); $API->debug = false; $API->connect($ip, $usuario, $senha); $API->write...

binhorp

I'm using pppoe local authentication, tested up to version 5.26 and does not work, I need to find a way to get the name to display a php page link consumption of customers, through the pppoe logged.
I am very grateful for your attention friend.

binhorp

The dynamic queue name will show ex: =.id=*1 >>> [21/21 bytes read. >>> [21, 1324] =name= >>> [14/14 bytes read this is dynamic =.id=*2 >>> [15/15 bytes read. >>> [15, 667] =name=marquinho >> this is static $API->write('/queue/simple/print',false); $API->write('=stats='); $ARRAY = $API->read();

binhorp

Hello everyone, I am unable to get names of simple dynamic queue with php api, would like some help but the experienced group, I thank you for your attention

binhorp

Thank you friend, you could help me with this problem, I need to move a queue to the top, how would the script below? $API->write('/queue/simple/getall', false); $API->write('?name=' . $name); $ARRAY = $API->read(); $ARRAY = $ARRAY[0]; $API->write('/queue/simple/move', false); $API->write('=.id=' . ...

binhorp

Good afternoon everyone, I am trying to move a queue to first position through php api, but sometimes the script removes all queues rather than move it, someone could give me a hand with this script? routeros version routeros 5.2x very grateful to all! $API->write('/queue/simple/getall', false); $AP...

binhorp

Buddy I am very grateful for your attention, solved the problem of white screen was allowed in the file, I now have the following problems you have no idea what can be? Fatal error: Uncaught exception 'PharException' with message 'manifest cannot be larger than 100 MB in phar "/home/bakanas/sis...

binhorp

WTF? All requirements are OK...

binhorp

<?php
use PEAR2\Net\RouterOS;
require_once '/home/bakanas/sistema/web/html/lib/PEAR2_Net_RouterOS-1.0.0b3.phar';
echo 'Test OK';
?>

Only white screen, is there any command that I can check if all the requisites are met in my php?

binhorp

PHP Version 5.3.3-7+squeeze16 System Linux dns1 2.6.32-5-686 #1 SMP Thu Nov 3 04:23:54 UTC 2011 i686 Build Date Jul 17 2013 17:02:01 Server API Apache 2.0 Handler Additional .ini files parsed /etc/php5/apache2/conf.d/gd.ini, /etc/php5/apache2/conf.d/mcrypt.ini, /etc/php5/apache2/conf.d/mysql.ini, /e...

binhorp

Oops sorry was pretty gross error on my part, but still just keep getting white screen when I add the lines <? Phpuse PEAR2 \ Net \ RouterOS; require_once ("$ DOCUMENT_ROOT/lib/PEAR2_Net_RouterOS-1.0.0b3.phar");?> I must be missing something in my php but have not figured out what it is, s...

binhorp

I tried using the following way
<?php require_once("$DOCUMENT_ROOT/lib/PEAR2_Net_RouterOS-1.0.0b3.phar");
use PEAR2\Net\RouterOS;?>
but it did not work I think something is missing in my php, thanks for the reply

binhorp

I am very grateful for your help, but I could not install this API in my php, when I try to use it I only get a white screen, like something like
$ API-> write ('/ tool fetch url = "http192.168.1.1 / / script.rsc"', true);
$ ARRAY = $ API-> read ();
very grateful to all

binhorp

Hello everyone!
Do I need to dowload a aquivo and run an import that file all this via php api eg
/ tool fetch url = "192.168.1.1/script.rsc"
/ import file-name = script.rsc

I'll be very grateful if someone can help me

binhorp

Hello everyone! I'm trying to make a script to add ips for a profile to a hotspot-address list in version 3.30 is the script executed by all who are part of this profile the problem is that I am not able to get the ip of these customers here's the script so that someone can help me figure out where ...

binhorp

Hello everyone! I'm trying to edit a hotspot via User profile api and I can not the lower the php script that does not work could someone help me? Thank you for your attention $nome = 'profile 150k'; $API->write('/ip/hotspot/user/profile/getall', false); $API->write('?nome=' . $nome); $ARRAY = $API-...

binhorp

I am very grateful friend problem solved
Thank you all!

binhorp

I need to run the following command via PHP API
/interface wireless access-list add forwarding = no authentication=yes interface=wlan1 mac-address=08:10:74:9 F: 7A: DC

Thank you!

binhorp

Sorry my English friend
I was wondering if it is possible to manipulate "/ interface / wireless / access-list via API
Add, Remove, Disable, etc. ..
Thank you for listening!

binhorp

Hello everyone!
I wonder if anyone has an example of how to later add mac-address access-list using the API + PHP
Thank you for your attention!

binhorp

My config is soos Ek het probeer om verskeie conf en tot nou toe kon ek nie maak dit werk authorize { preprocess pap chap mschap suffix eap { ok = return } unix files sql expiration logintime } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } unix eap }

binhorp

Thank SurferTim Below is part of an attempt to debug authentication Thank you for your attention! rad_recv: Access-Request packet from host 187.28.126.3 port 39327, id=92, length=147 Service-Type = Framed-User NAS-Port-Id = "wlan3" User-Name = "00:05:9E:83:C9:AF" Calling-Station-...

binhorp

Hello everyone! I'm having a problem to authenticate mac wireless freeradius mikrotik in February on "1171 was quiet" 5.5 use debian lenny postgres and php can authenticate hotspot, PPPoE, DHCP, Winbox, ssh etc ... mac hard but wirelless ta I tried parameters: "User-Passord" of t...

binhorp

Good morning everyone! I am with the following situation I Telemar link 50 connected to a mega mikrotik Ether1 201.18.xx.x/30 ether2 200.189.xxx.x/24 200.189.xxx.x/24 must create a routing for my clients who are providers a schema like the one I receive from the operator example client1 ip wan lan 2...

binhorp

Hello all
I am intending to use R52n with 02 antennas in a 60km link from my doubt is which option enabled to use the 02 antennas in the R52? and how much trougputh I get away with this?
Thank you all!

Search found 39 matches

Re: CCR1016-12G always has a core of 100%

CCR1016-12G always has a core of 100%

Re: High traffic in the ethernet port protocol 814

Re: High traffic in the ethernet port protocol 814

Re: High traffic in the ethernet port protocol 814

Re: High traffic in the ethernet port protocol 814

Re: High traffic in the ethernet port protocol 814

High traffic in the ethernet port protocol 814

Problem in Groove A-52HPN with all the LEDs lit sign

Example with announcement of ipv4 block

Doubts about pppoe MTU

Re: doubts /ip dns servers

Re: doubts /ip dns servers

doubts /ip dns servers

Users can not remove the pppoe for php api

Re: get names of simple dynamic queue api

Re: get names of simple dynamic queue api

get names of simple dynamic queue api

Re: Problem when trying to move simple queues

Problem when trying to move simple queues

Re: import and fetch via API

Re: import and fetch via API

Re: import and fetch via API

Re: import and fetch via API

Re: import and fetch via API

Re: import and fetch via API

Re: import and fetch via API

import and fetch via API

Later add the ip address-list logging on to the hotspot

Edit profile user hotspot via api + php

Re: Add mac-address access-list nan by API

Re: Add mac-address access-list nan by API

Re: Add mac-address access-list nan by API

Add mac-address access-list nan by API

Re: Freeradius 2x and Mac wirelless Authentication Big Heada

Re: Freeradius 2x and Mac wirelless Authentication Big Heada

Freeradius 2x and Mac wirelless Authentication Big Headache

Spreading range of IPs on another valid ip valid

Doubt in configuration of 02 antennas R52n