Hi,

I've found an error config about my host! now all works fine

Thanks!!!

Hi All, I set up a lab on my home: I've a -router provider 192.168.1.254 (Vlan 10 - 192.168.1.0/24) -Cisco Switch 192.168.1.250 - 192.168.7.254 - 192.168.5.254 -Port 1: connected to Router Provider - Access Vlan 10 -Port 2: connected to eth2 on RB5900 - Access Vlan 10 -Port 3: connected to eth4 on R...

Hi at all,

I changed the config and I remove some bridge that isn't in production
I set the correct routes like 0.0.0.0/0 to 192.168.1.254 (my provider router) and other one 192.168.0.0/16 to my RB router, and now all works fine

Thanks for all your support!!!

Stefano

Hi @anav: Thank a lot but is not a problem, I've a LOCAL bridge on ether2 with spcific DHCP and IP Address and I can reach the RB5009 @BartoszP: I already read it, now I've a varous VLAN on my RB5009 like the screen, the port ether4 is connected on Cisco Switch with port in Trunk, allowed vlan 2,3,5...

Hi All,

I've configured an RB5009 with some VLAN, now I've 2 host; 1 in vlan 5 with IP Address 192.168.5.11 and one in Vlan 7 with IP 192.168.7.112, but from Vlan 7 I can't ping host in vlan 5, anyone can help me, please?