I AM HAVING VERY SLOW PERFORMANCE ON THE NEW USER MANAGER ON 5.1


really nice new features, but very slow web performance.

i am running and api funcion to add certain users to the user manager, but now i am trying to parse the log file to see which router was the lastone to send the authentication request.

thanks in advance .
regards

Hi everyone, sorry to bother,I dont know if this has been asked before, if so would preciate a link,
If anyone can help me with a sample on how to add simple queues and address list via the API I would really appreciate it

mangle is counting traffic /ip firewall mangle add action=mark-connection chain=prerouting comment="MARCO PRIO 1" disabled=\ no new-connection-mark="PRIO 1" passthrough=no protocol=icmp add action=mark-connection chain=output comment="" disabled=no \ new-connection-mark...

Hi everyone, I have done over 30 Mikrotik Instalations for QoS, and never had a problem, until I started with version 4.2 only done 2 , and both have problems. the traffic on the ethernet is 9 megas and the Queue Tree show 1 meg or so. anyone had this problem? /queue tree add burst-limit=0 burst-thr...

I have over 30 Mikrotik Implementations with 3.x versions, and all the Queue tree applys limits pefectly the 2 instalations that I have done with 4.2 do not, they show a little traffic Ethernet passing 8 megas, queue tree showing only 1. /queue tree add burst-limit=0 burst-threshold=0 burst-time=0s ...

ALL MUMS SHOULD BE ON LOCAL LENGUAGE

you can control P2P if you configure your QoS as a firewall
you mark everything you know , everything else, is P2P

IT WORKS GREAT, ARES CONTROL, TORRENT CONTROL

add the dstination to an address list, and keep the nat to that address list with the same gateway

Hi everyone, i am strugling with a netwach script the idea is this Ping the Gateway with netwatch, and if the gateway goes down, enable a rule on the proxy that denies and redirects all traficc to a website that its says that the network in on maintenance. the rule works fine if I enable it manually...

Hi everyone, i am strugling with a netwach script the idea is this Ping the Gateway with netwatch, and if the gateway goes down, enable a rule on the proxy that denies and redirects all traficc to a website that its says that the network in on maintenance. the rule works fine if I enable it manually...

ip
firewall
nat


dst nat

destination protolocol 80


action
redirect your web proxy port

IP
firewall
nat


dst nat chain



dst address public IP

action

dst nat private IP


all set

I agree with the RB1000 or get a small Dell Server with good warranty and same day service.

use all CF no harddrives.
and the RB44G 2 of them.

This should get you going.

dont use connection mark for this, use routing mark and use it on another ip route with the same distance than your current gateway.

regards

my experience it also depends on what else are you doing on the RB, routing, mangling, firewalling, nating, and the type of users.

simple queue , selecting the interface

Hi everyone , this is my first post which I would really appreciate any help. Scenario Pentium 4 , with Level 4 OS, and a RB44G 2 ethernets connected fine , one to LAN , one to ISP1 Now i am adding a second ISP on the ether 4, that is connected to a canopy wich brings 2 megas of aditional Internet. ...