The first config snippet was from the guide anav posted. Not my config. My config is a few posts above. Currently, I only have the VLAN 300 (guest) configured, since I wanted to start with it. Ultimately, I want three VLANs: 100: One management, where I can access the router, the WiFi APs, the NAS e...

I just bought a new switch now. According to the Netgear community the current switch only partially supports VLAN management.

Will check in again once it arrived.

So far, I configured the switch only and testing with one Wi-Fi only while keeping the old non-VLAN setup on the side. The CAPs are CAPsMANed. When connecting to the `guest` Wi-Fi, I cannot obtain IP address from the DHCP. But I think the tagging of the LAG is a good pointer. Unfortunately, I couldn...

My current config on the managed switch. Now with three VLANs (mgmt, home, guest): Bildschirmfoto 2025-01-21 um 12.11.20.png Bildschirmfoto 2025-01-21 um 12.11.26.png Bildschirmfoto 2025-01-21 um 12.11.32.png Bildschirmfoto 2025-01-21 um 12.11.36.png Bildschirmfoto 2025-01-21 um 12.11.40.png Bildsch...

Yes, looks like this:

Thanks for the prompt reply, but unfortunately, no success. I added your rule, but nothing. No successful ping to 192.168.1.1.

Full config export: # 2025-01-20 09:48:07 by RouterOS 7.17 # software id = REDACTED # # model = RB4011iGS+ # serial number = REDACTED /interface bridge add admin-mac=REDACTED auto-mac=no comment=defconf name=bridge /interface ethernet set [ find default-name=ether3 ] comment="b\C3\BCro" se...

Cannot be that unhappy, you posted on JAN 08, and only getting to it now??? Must have been in the hospital or on vacation. Haha, no. In the past, when I tried to get the configuration of my VLANs right, I regularly locked myself out (and everyone else in the house). They are unhappy when I 'play' w...

I recently bought a Luleey SFP GPON module as a replacement for the 'official' GPON module from my internet provider. This one here: https://www.luleey.com/product/2-5g-xpon-stick-sfp-onu/. The official one has connection issues sporadically, and the Luleey one is supposed to be more stable. Accordi...

Thanks for all the help so far! I haven't had a change to try it out yet. There are members in the house very unhappy about the WiFi not being accessible. Will keep you posted, though!

I'm using CRS328-24P-4S+ with LuLeey LL-XS2510 (rebranded DFP-34X-2C2 with custom firmware in it).

May I send you a PM regarding the LuLeey module?

On the netgear switch all trunk ports retain vlan1 untagged on the port. PVID setting remains at 1 for these ports. On the netgear switch all access ports ( going to dumb devices ) are untagged on that port going to the device and tagged for trunk ports. PVID is changed to relevant vlan ID. You mea...

I have the following network topology at home: topologie.drawio.png I want to follow this guide for setting up my WiFi to provide different networks on different VLANs. My question is, how do I need to configure the PoE Switch in between to pass the tagged frames to the router? Currently, no VLAN se...

Follow up.

Works fine now with the RB4011. CPU usage is almost always below 5% and package loss is gone.

Thanks for bearing with me.

For the record, my config. # 2024-10-17 08:53:04 by RouterOS 7.16.1 # software id = REDACTED # # model = CRS125-24G-1S # serial number = 6244054AD9DA /interface bridge add admin-mac=REDACTED auto-mac=no comment=defconf name=bridge \ vlan-filtering=yes /interface ethernet set [ find default-name=sfp1...

I ordered a RB4011iGS+RM now. Will update once its here.

You would see that when used as router (it is a switch) you would be able to get around 245Mbps at max.

Wouldn't 245Mbps be enough for home use. And how would this be related to the lag spikes?

What devices should I be looking at?

Can you check CPU usage? (think it is on /system health) This is /system resource print : uptime: 20h12m58s version: 7.16.1 (stable) build-time: 2024-10-10 14:03:32 free-memory: 74.0MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 16% free-hdd-space: 111....

From router to 8.8.8.8: sent=232 received=219 packet-loss=5% min-rtt=6ms690us avg-rtt=10ms141us max-rtt=38ms349us From my machine to 8.8.8.8 (through router): 435 packets transmitted, 422 packets received, 3.0% packet loss round-trip min/avg/max/stddev = 6.493/919.693/2961.925/997.422 ms From my mac...

Hey everyone, Some time ago, I bought the CRS125-24G-1S-RM as a second-hand device. I am happy with it so far. It is running with an SFP fibre module from the Deutsche Telekom and I have no issues with internet in general. However, when I have video calls, I get lag spikes. To test where they come f...