Okay so update Thanks you so much @rplant that new queue tree worked!!!! I am forever grateful I do have one more issue though. we have another site with a similar issue. File transfers TO the DC (uploads) result in the following 40MBps to 60MBs without any shaper ~8MBs with the shaper File transfer...
Though I do not understand why you have a limit of 100M on the backup traffic. 100M was just an arbitrary number that i was going to play around with. Also i was a little confused by you could perhaps make a new pcq type queue, based on pcq-upload-default, but with a 24 mask. (So everything from 10...
H All, At our main site, we have a 500 Mbps link to our ISP. An issue arises when our on-prem server runs a backup sync to the cloud, which saturates the link. This leads to the ISP policing our traffic and dropping packets. These dropped packets affect call quality for other sites using the CUCM se...
Thanks a lot @jvanhambelgium. I will try that and see what happens. Any thoughts or recommendations on this potential shapping config /ip firewall mangle add action=mark-packet chain=postrouting out-interface=ether1 new-packet-mark=shaped-packets passthrough=no /queue tree add name="WAN-Shaper&...
Thanks for the reply all. @jvanhambelgium We not using an SFP port. just using ether1 for WAN and ether2 for LAN so i could be an issue with the grouping? @rplant Would something like this work /ip firewall mangle add action=mark-packet chain=postrouting out-interface=ether1 new-packet-mark=shaped-p...
We’re using a MikroTik RB3011UiAS router with a gigabit (1G) link connected to our ISP’s NTU through ether1 The router does not perfom any Firewalling or NAT We have configured traffic shaping on the MikroTik using “simple queues.” However, the ISP reports they’re still seeing policer drops on their...