MikroTik

alternativi_boy

helo everybody,

my clients use for example 192.168.1.1 dns and 192.168.1.2
so other provider have 182.168.1.1 and second 182.168.1.2, so how can i redirect dns in my mikrotik, cause i have much clients and i cant change every computer dns..

Thanks, Best regards...Muldahirr

alternativi_boy

so if my second provider dns are 192.68.22.222 then in thi nat rule i have to do like this: chain=dstnat action=dst-nat to-addresses=192.168.22.222 to-ports=53 protocol=udp in-interface=local dst-port=53 so it's not necessary to subscribe fist provider dns right? if you can explain me cause i dont k...

alternativi_boy

hello, i hav a link from my provider, but i want to change with another provider, so the problem is that my client use 1st provider dns, and 2nd provider have othe dns, so how can i redirect just in my mikrotik and client dont need to change..

Regards Hablaraim

alternativi_boy

hello i wanna asko something about nstreme-dual. i have configured and its working ok but i wanna know why set ethernet in bridge..its the same if i configure with nstreme but no bridge..tell me this please

Reguard AlternTivi

alternativi_boy

no i use 2.9.6 version...its not mikrotik version problem..ThankYOuu

alternativi_boy

hello everybody, its the 3rd time that im writting here, and nobody doesnt answer to me, this thing is happening so much, every time i log on my router i see thiss message..please help me tell me what is this and how can i stop this..

REguards ALTERNATIVI

alternativi_boy

can you tell us more concretly what you wannt..

alternativi_boy

hello everybody..

when i go in log i get this:

telephony error incoming call from x5^$%H...... [ip address] to 43233##$44$ no device to call ...

IS THIS DANGEr? OR HOW CAN I EVITATE THIS..THANK YOU

Reguard AlterN@tivi

alternativi_boy

no matter where you are connected and what bandwith you have.. if youre devices have the range ip addres for example 192.168.1.254/24 and the first client use 192.168.1.1, and the second use 192.168.1.2 then if you wanna limit for each clients you have to do in queues for example Client1, 192.168.1....

alternativi_boy

Hi , can anybody guess what is this and how can i stop this..cause its the second time that i see this error log..

Thank You

Reguards

alternativi_boy

i use 2.9.6 and i dont use telephony package for nothing, the telephony sector is dafault from installation..

alternativi_boy

you can enter in System Logging, and disable all logging report..thats all you have to do..

ThankYou

alternativi_boy

Hello, i saw in my mikrotik Telephony error, from an ip address.. i dont know what is this, the message show like this:
"telephony error Incoming call from xxxxx[ip address] to 00525552680000 denied, no device to call to

can anybody explain me what is thiss..Thank You

REguardss...

alternativi_boy

Helo everybody, i know maby its in wrong place the post, but can somebody help me an project of 2.4 and 5.0 Ghz project frequency...some people think that they are danger.so if anybody can help me please post anything..

With Reguds

alternativi_boy

you have to add simple queue for each Pc computer with destination address xxx.xxx.xxx.xx/32 and the Limit..

With ReguarD

alternativi_boy

ThankYou Very Muchh

alternativi_boy

Hello..

i know that unticking Default Forward in Interface , the customers cannot ping eachother, but what happen when i set Forward No, in Access List,in Macc address of Bridge..

ThankYou ReguarDs

alternativi_boy

any idea?

alternativi_boy

you should try filter stoping this, because its very danger for you're MikrOTik, and you should be more carefuly when you work in public interface..

:D;

alternativi_boy

Hello everybody, i wanna ask you about system critical loging, when somebody try to login , and he failure 3 times then he get time out..

..

alternativi_boy

try static arp, and the interface client make ARP reply- only ..it will work:D:D

alternativi_boy

Hi, i have a question about static arp, my client antena ip is xxx.xx.1.100, and pc ip is xxx.xxx.1.2, when i use dynamic arp, i can ping his antena , but now that im using static arp, i cannot ping bridge..where is the problem..

alternativi_boy

you will install wine, and you will open winbox, but immidiatly it will freeze, but if you enter in youre router with macc address it works fine..

Reguards

alternativi_boy

or look maby you add ip address with the same gateway and it dosnt work..Bye

Reguards

alternativi_boy

so you mean that in pptp server i disabled and its everything secure about this or i have to drop another rule 1723

alternativi_boy

Ok, i entered in PPTP server and i remove enable tick, so you mean that somebody enterd in my Miikrotik Router, or what...and if you can tell me any filter rule about this security..

alternativi_boy

Hello everybody:D, i have a problem, when i enter in log Mikrotik Router, i see ip addressess and i dont know why are they , they are like this.. pptp info TCP connection established from xxx.xxx.xx.xxx pptp ppp info <pptp-0> waiting for call pptp ppp info <pptp-0>terminating ...- cntrl message too ...

alternativi_boy

the only way is to install an win. server, or linux..

alternativi_boy

thank you fatonk..

alternativi_boy

fatonk if you can add me in last reply that i wrote...With Respect alternativi

alternativi_boy

faton, ke e-mail..jam edhe un nga kosova, nese ke email..
ose nese mundesh me vendos ti mua..ylberi_boy@januzaj.com
thank you verymuch..

alternativi_boy

look in the posts here because a post about redirect is already in this forum

ThankYOu

alternativi_boy

try to xhange the frequency.. or try to to configure not same with other interfaces... if again it disconnected, and decided to deauth try to disable all client , and then enable one by one , and look cause maby any client may be infected ..or you dont have another choise just to change the hardware...

alternativi_boy

look, i tryed Accept rule first, and the drop rule second, but nothing happened.. i steal can ping the router, but when i placed drop rule first, and accept rule second, then i cannot ping the router, but i cann access on it.. P.S. i cannot ping it from my subbnet ip that i added in source-address, ...

alternativi_boy

Hi... Can anybody tell me how can i drop pingin in firewall rule.. i tryed with Drop Input, and then accept input with avaiable ip but the same thing, i cannot ping but i can access in it..so what i wANNA do is...nobody canot ping my router ip..just my pc ip..is any firewall rule about this or what....

alternativi_boy

ok i will try to look something..Thank you for you're replying

alternativi_boy

thank you very much..

alternativi_boy

hello everybody, if somebody can help me in this question.. so.. i know that 192.168.1.[0]/24 192.168.[0.0]/16 but can anybody teell me if this is right: 192.[0.0.0]/8, if this is not right please somebody tell me /"what" i have to add ip address for this 192.0.0.0.. and if somebody can wr...

alternativi_boy

where can i read the manual and the wiki, if you can give me any advice or just write me the link..ThankYou

alternativi_boy

please any answer ???

alternativi_boy

does anybody have any suggestion or any answeR?

alternativi_boy

Jordan, send me an email to john dot woodfield at jwcn dot biz I would like to discuss implementing user manager and the billing system with you. i dont understand you my friend, if you can be clearly on this post... because i see tonight and again the same problem , the client limit is 200 kb/s, b...

alternativi_boy

Just use your firewall and only allow access from your subnets. if you can explain me this firewall filter, and you mean that i can access only from my subbnets, inside of my network not inside.. P.S. and if you can explain me the ip that tryed to enter, and the user why is hiden, maby why he tryed...

alternativi_boy

Hello everybody, when i enter in my Router, in log i have thiss message system,error,critical login failure for user 0u 8 w- - S V o:1:Bt via winbox when somebody try to enter in my router, it show the user and the ip too, but now it dosnt show any ip or any user,, can anybody tell me how can i bloc...

alternativi_boy

I have a big problem..

Some clients use Ares, and Imesh or LimeWire, and it hapen that he can take internet more than the limit..i dont know what to do to block this ...maby he can take 400 or 500 kb/s and his limit is 200 kb/s..

Thankyou

alternativi_boy

Yes you did youreself clear..

ThankYou very much it worked well..

alternativi_boy

hello everybody.. i have made a linux webserver, and in mikrotik in firewall natm i have addedd chain:dstnat, src-address:his ipxxx , Protocol:Tcp, action:dst-nat, To addresses:webserver ip, to ports:0-65535.. i dont know if this is enaugh, but im not sure that the customer cannot work in internet, ...

alternativi_boy

but if i change the port number how can i access in http page of my router ip..

alternativi_boy

first i wanna thank you rafiq for his answer but i dont understand it.. when i add ip address 192.168.0.1/30 then the ip add. is 192.168.0.2, gateway is 192.168.0.1, and broadcast is 192.168.0.3.., so the customer can use only an ip address..and subbnet is 255.255.255.252 but when i add 192.168.0.1/...

alternativi_boy

or you may use firewall and drop specific IP addresses or allow access only to specific IP addresses. can you tell me the firewall filter how to drop specific ip addressess or allow only an ip address. P.S its any firewall filter to drop pinging for specific addressess to, and allow only an ip addr...

alternativi_boy

i dont know if you understand me..i mean how can i make this page with user and password access, because the clients can access on it without problem..and i dont wanna disable 80 port, but i wanna make this page with password access..

Respectt

alternativi_boy

hello everybody..i have a question

when i go in http page of my router ip address, can anybody tell me how can i make it with user and password..
i know the way how to disable this port, but i dont wanna disable it just to make it with user and password to have access in it..

THankYOu

alternativi_boy

hello everybody, i have a little quesion..

i have two clients that use a switch, and when i added the ip address i added

xxx.xxx.x.x/29, and they can use ip 2-6, can anybody tell me how can i add an ip to use just two ip 2 and 3

example:

192.168.1.2
and
192.168.1.3

thank You

Search found 53 matches