Did anyone try to install 4 Noctua fans with Y-splitter cable instead of 2 ?

Do I need to click Auto Isolate on ether1 ports on both Mikrotiks ? By default it is false.

I have this topology : flat-Page-5.jpg I would like to enable RSTP on all switches but this causes the network to hang. STP priorities : bridge on CRS510 - 0x1000 bridge on CRS305 - 0x8000 priority on TP-Link - 0xA000 port path cost ether1 on CRS510 - 20000 ether1 on CRS305 - 20000 2 ports on TPLink...

My other Linux server that is 2x2.5G bonded on Linux side and is connected to Layer3 TP-link switch. I didn't have to do any config changes on switch to make this bond work. There are some bond modes, available in linux, which don't require switch to know there's bond involved ... but it works well...

Of course there is, bonds have to be configured on both sides of logical link. And bond mode (e.g. 802.3ad) has to match (Tx hash strategy can be different on both ends). I guess you didn't get feedback on linux-side config because that is largely of scope of this forum (which is to support each ot...

on #1 #remove ether1-ether4 from bridge create bonding if /interface bonding add mode=802.3ad name=bond1_LNK_sw2 slaves=ether1,ether2 /interface bonding add mode=802.3ad name=bond2_LNK_linux slaves=ether3,ether4 add bond if to bridge /interface bridge port add bridge=bridge1_LAN interface=bond1_LNK...

I have 2 x 10G Linux NAS and 2 Mikrotik switches CRS305-1G-4S+IN and CRS510-8XS-2XQ-IN. Connectivity looks as : 2 x 10G NAS --> CRS305-1G-4S+IN (2 SFP+ ports) other 2 SFP+ ports of CRS305-1G-4S+IN --> CRS510-8XS-2XQ-IN I would like to setup 2 x 10G bond (802.3ad) on NAS for my Linux NAS and trying t...