ANY OPINION?

something I missed to say is that " I have set the WDS mode as Dynamic "

I have a base station lobometrics 968 radio with a sectoral antenna, and I use to connect to it with to lobometrics 954 radios as client in two different places in the city. I set the "AP Bridge" mode on the base station and the "Station WDS" on the client radios. I`m providing b...

what are the best parameters for long distance wireless link to be set in winbox ? I`ve link about 40km using lobometrics 968RS with 31db solid parabolic dish antenna. but I dont get a good bandwidth. tx ~ 3mbps rx ~ 3mbps I`d like to know what are the best and important parameters that has to be se...

I did this but it didnt work,
I did this on the client side only.
I cant do it on the base station cuz the bandwidth for each user differs from each other.
is there any way to limit them by IP address on something else?

hi I have a lobometrics 954RS and 120` sectoral antenna as a base station, and I am using TT-slab and another lobo radios to connect to it. I am providing internet from this base station radio to the clients. I am not using any accounting service, I just connect client units to my base station troug...

what happens to the license of my OS? I haven`t done it before, I don`t know what happens next?
should purchase a new OS with new license?

hi, I have a lobometrics 954RS. after a while the eth0 port didnt came up, but I still hear the "double beeps" which means to me that the board is booted. so I opened the enclosure. my board turns on with POE but the LAN interface does not came up. so I used to turn on the board by attachi...

I can proof true +140 Mbps real throughput in a Lobo 968T. Use radios bonding, but not Nstreme2. Can reach 150/160 Mbps with 968T with bonding two wireless, is not difficult. signal strength -60 and noise -98 With nstreme2 obtain 70/75 Mbps one path x2 = 140/150 Mbps. would you please tell me how t...

I did it with bonding but I couldn`t do it with Nstreme2. with bonding ( using balance rr ) my throughput was about 80Mbps, according to http://www.lobometrics.com/968TS.htm it must reach up to 150 Mbps. can Nstreme2 help me doing this or there is another way to reach this bandwidth ? testing with w...

I linked first radio cards together and second cards together using station and bridge int mode. then I changed the mode of all cards to nstrme-dual-slave. then I created a Nstreme2 int and specified the cards for TX and RX, as a remote MAC in Nstreme2 int I entered the remote TX radios MAC. in a br...

yes, because I am using winbox for configuration.

http://www.lobometrics.com/968TS.htm

tnx normis, I`ll check it out, but I`m not familiar with configuring by console
I just have used winbox

may lobometrics radios are LOBO 968TS.

is it better to use one link for RX and another one for TX, or both of them in TX/RX mode but balancing the traffic?

I have 2 lobometrics radios which have 2 wireless cards.
I want to use one RF as TX and another as RX.
I think should do this with bonding interface, but I dont know how.
please help me figure it what should I do.

regards
alimoni...