Hi
I resolved the trouble, I had change the Motherboard maybe the chipset is not supported.

I founded the problem, The ethe1 is failed so i changed it for other model "Intel Chip".

thanks

any idea?

I don't have problem with the wallgarden...i can surf without problem but the login page never load....

Hi I'm using ROS V3.9 and I configured my hotspot and when I connected to the Wifi Hotspot my WLAN card has received the next parameters IP: 10.5.50.254/24 GW: 10.5.50.1 DNS:192.168.1.254 But the login page don't show it, i checked into winbox the internet with a ping and I have reponse from interne...

Enable the web proxy, you don't need modify nothing in the web proxy then go to firewall and do the next step:

1.- Into the NAT section add
chain: dst-nat
protocol: tcp
dst-port: 80
action= redirect
to-port:8080

2.-Back to webproxy panel and add the rule.

You need set the IP manually to interface like (Bridge, ethe1,ethe2) or get the IP with DHCP-Client if your need have DHCP-Server.

Hi

I've a doubt about the configuration of MESH with MK http://wiki.mikrotik.com/wiki/Mesh_wds

How many client support each AP with this configuration?
How many AP link WDS can i do with this configuration?

I'm using four MK 511 with 30 client all 2.4ghz.

Thank's

Heri

Sounds like the chipset is not supported with RouterOS. This is the IDE chipset. Are you installing with a HD?

Yeah I install with:

HD SATA WensterDigital 80gb
Motherboard Intel model BOXDP35DPM
1GB DDR2 memory
CD-ROM IDE Sony

Thanks

Hi!!

I want install RouterOS v3.9 but when the image is loading appear the next message FATAL ERROR: NO CD-ROM FOUND but I tried with 3 diferent cd-rom (IDE, USB EXTERNAL, SATA INTERNAL) and nothing work.

please help me...what can I doto fix this?

Thanks

Heri

Thank's

I fix the trouble with crossover cable.

Hi everybody

I'm using a RB200 with 48v but when I connect my laptop to Ethe1 or Ethe2 I not have link but if I connect the RB200 to the Switch then it work fine......

My ethernet port is fine because i can configure my Mikrotik 511, 532 with 18v.

what's wrong?

Thanks

Heri

Hi

'll configure my ROS with Hotspot + Proxy but I need a Blacklist to block website, if anybody know a URL to get the file please say me.

Thanks

Heri

Thanks for the reply

But, what do you think about the processor and motherboar? are both compatible?

Best Regard

Heri

1) disable all necessary service ports.... (usb, serial, parallel, audio....) 2) a IDE flash or Compact flash is simply better than HD Ok, thanks for the reply The functionality of the server is a hotspot with proxy for 400 users for this reason I think use a HD 160GB is much better than a Compact ...

Hi everybody I need buy a server to install the Router OS V3.X but I not want buy a Server because are very expensive so i want buy the next parts and make a pc: Processor INTEL DUAL CORE 2 GHZ socket LG775. Motherboard INTEL with support Dual core / xenon LG775. Memory DDR2 667Mhz 1Gb. Hard Disk SA...

exactly with dual nstreme you can have full duplex because 1 wireless card it only function like RX and the other card like TX, so you need a routerboard with 2 wireless card in each site.

Heri.

Hi

The info of the last post is very important but you should read the next link.

http://www.mikrotik.com/testdocs/ros/2. ... e/vlan.php

I hope this help you

Heri.

Interesting..
And.. CCQ and Signal strenght ?
bye - oveda

Hi oveda it's me mushmx

Signal strenght = 72/78
mb transfer= 24/36

does you link have a line of sight? coz is very important

Heri

No worries

The other thing is time. Does the link go down first thing in the morning after sunrise?

The link go down without matter the time is variable

Will MT be supporting Ubiquiti's XR7 card?

Hi

Some friends told me that Ubiquiti's XR7 are excellent option for MK.

Try using a lower frequency, 5745, or even to test, set your country to germany and use 5500 (to test only)

If your link stays up you can be sure the problem is interference, if not, you know the problem lies elsewhere

Ok, I'll do the test the next week.

Thanks Belyivulk

What's the max link distance/throughput point to point attainable with a couple of RIC522T or RIC522C (with miniPCI R52) ? I have reached 30 Mbps/UDP 20 Mbps/TCP on 8 km point to point link. It is possible to reach 15/20 km link with at least 10/15 Mbps trhoughput ? (obviously with perfect fresnel ...

What frequency are you using? 57xx? Have you tried the frequency usage tool? What is your noise floor when the link is good? what does it become when it gets bad? What is the humidity like? What time of day does the link go bad, and for how long. How do you fix it? What type of cable are you using ...

we have a 58km link here in NZ, with Mikrotik 30DB Dish antennas, R52H, Mikrotik Pigtail & LMR400. We get -69 / -71 for signal Thanks for the reply Belyivulk I'm using the next equipments: 2 Routerboard 532 2 Wireless card XTREMERANGE 600Wm 2 Antenna heavy duty of 28dbi 1 tower "AP BRIDGE&...

Hi chvdr and Belyivulk

It's me mushmx thank's for the reply but what kind and mark of antenna recommend me to use with this link? and if you know some website please post it.


Thanks, best regard.