MikroTik

dainen

Flashfig and webfig are also broken with 5.1

webfig seems to work perfectly on 5.0

dainen

411u and its case will work.
The 3g usb stick will not be internal though.

dainen

NV2 is terrible on 5GHz-A, 40MHz channel width. x86 based routers are freezing if using NV2. On some machines, problem with this has been solved by reducing hw-retries value to 7 but still I have some routers which freeze constantly. Can someone post a picture with setting on nv2 links using 40MHz ...

dainen

Try upgrading the bios

system / routerboard / upgrade

dainen

Interesting that Byron Bay would be suggested, that'd suit us fine !!! We've built a wireless network with 40 + AP's and hundreds of rural clients all situated on the north coast, our office is in Byron Bay. That being said we'd be more than happy to travel anywhere in Australia or New Zealand for a...

dainen

@zgi Your onto a losing battle, Mikrotik support have now confirmed that the noise level/received signal strength is not reported correctly. They still don't know the exact cause but thinks it's a problem with the Atheros Chipset Drivers. Don't think therefore it's anything to do with your setup bu...

dainen

should work for UM4 http://forum.mikrotik.com/viewtopic.php ... 60#p126060

dainen

We are having exactly the same issue using ROS V4.11 , the pages have been used multiple times for testing the PayPal payment process, and it works exactly as it should.

Except the /umfiles they simply aren't visible with ftp, winbox or terminal.

Has anyone solved this one yet ?

dainen

Found a good iPhone app that can check wireless signal of associated clients and do very detailed link planning - and its free.

http://itunes.apple.com/us/app/sice-rad ... mpt=uo%3D4

dainen

Change "hw retires" to a higher number.

dainen

Just purchased it - Would be great to have it show the signal strength of the wireless interface.
Or better yet, having the ability to scan on the wireless interface.

dainen

Worked great during initial testing. I burn in my APs for a bit before I put them out there, so I went to test it later on and signal went from the -50s to the -80s. Swapped the card, never had another problem. We had the exact same problem. We have a 33km link with 433AH (ROS 4.11) and R5H running...

dainen

Leaky coax? -Generally used for UHF stuff, no idea if it will work with 2.4ghz..
http://www.wwcables.com.au/origsite/leaky_rf_cable.html

dainen

The R52(H) are know to blow the diversity chips resulting in a Tx/RX difference of about 15-20db. Not having worked with the N version I can't say if this is relevant or not. Only if they are not installed correctly - such as powering on without an antenna connected or not using surge protectors....

dainen

Here is our map, not fully up to date but getting there..

dainen

I was playing around with his for a while. I think you need to assign all your queues to be childes of the same parent queue. The parent must have a max-limit, usually your total available bandwidth. It might not the best way to do it but it worked for me. I would like to know if its possible to do ...

dainen

Hi Eric, we have a similar setup. About 30 AP's loads of P2P Links and OSPF routed throughout our network. We use EOIP to transport PPPoE tunnels back to our boarder router... and frequently have MTU troubles. Seems as if we have to use 1450 for our PPPoE tunnels as EOIP doesn't properly carry 1500....

dainen · Re: End Of Month Script 2.9.51 Definitely worthy of a wiki

Definitely worthy of a wiki

dainen

Hi again, would there be any chance that you could help re-write it for 2.9.48 Router OS.

It is our main boarder router and i don't want to upgrade it for a little while yet.

I tested it on our v3 router and it works brilliantly.

Thanks,

Dainen

dainen

Cannot thank you enough !!!

Regards,

Dainen

dainen

To query the amount of active ppp sessions on our boarder router, at a 5 min interval,

/ppp active print count-only

Then email us if it the count of those active sessions is below 175.

I do it manually now to check if the network is running and customers online.

Thanks for the help.

Dainen

dainen

Hi we have an interesting scenario, we would like to monitor the amount of active ppp sessions and alert us if the count is less than a pre-defined threshold. This would help with monitoring, as we can see if there is network issues without needing to monitor all our access points and individually. ...

dainen

We have developed our own CPE's we sercure the pigtails by using small plastic clips with adhesive back, this holds the cable to the backing plate, we have made hundreds of these and never had an issue.

Copy of IMAGE_00028.jpg

dainen

Are you using Proxy-ARP

dainen

Hi,

I'm using 2.9.40
When ever I try to create a user with a download limit of over 4.2 gigabytes it always reverts back to 4294967295 bytes.
Is there a way to specify a download limit of over 4.2 gigabytes.

dainen

docket printer

dainen

I was referring to mlppp for PPPoE

dainen

MLPPP (rfc1990)

dainen

If you don't mind me asking, what type of connection are you using?

dainen

Sounds like a MTU problem
try this:
/ ip firewall mangle
add chain=forward protocol=tcp tcp-flags=syn action=change-mss new-mss=1440 comment="MSS FIX" disabled=no

dainen

Hi Znuff, We are in a similar situation, we want the accounts person who has little tech knowledge to be able to block people. With help from autohotkey and their forums I put together a crude and nasty script that may help. It asks for the relevant details, then telnets the Mikrotik and pastes the ...

dainen

I don't want to block only TCP, that's the issue. I want to block everything. If I block only TCP they could, for instance, play games over the net =/ This should block everything but port 80 (which is being directed to your webserver) and DNS requests /ip firewall filter add chain=forward src-addr...

dainen

We sometimes use a simple dst-nat firewall rule to redirect all connections from the customers IP address /ip firewall nat add chain=dstnat src-address=clientsIP protocol=tcp action=dst-nat to-addresses=Webserver to-ports=80 comment="Captive Page" disabled=no Dont know if this will help bu...

dainen

whats radius command to disable encryption

dainen

dainen

any news on getting the lables working with 2003

dainen

* MLPPP - As I understand it, this is already slated for 2.10?

Can this be confirmed? It would be great to be able to use Mikrotik for MLPPP rather then Debian.

dainen

Any plans to support multi-linking in the future?

Search found 38 matches

Re: RouterOS 5.1 is out!

Re: 3G to Wireless Conlnection

Re: 4.13 Nv2 great but loss of some monitoring parameters?

Re: RB 133 slow with 4x and pppoe

Re: MUM in Australia. Would you come?

Re: R52Hn strange readings

Re: How can I delete 90000 session in UM 4

Re: Customize Signup page was not working

Another iPhone App

Re: v4.11 - Looking for a Sit Rep on the wireless preformanc

Re: Mikrotik Management for iPhone Available Now

Re: 802.11n wireless link signal strength issues

Re: Wifi + Concrete walls = FAIL

Re: Too frequent problems with R52n (asymetric signal levels)

Re: Show us your map

Re: Simple QOS, No Limitation

Re: OSPF Route Distribution and Fall-over Issues

Re: End Of Month Script 2.9.51

Re: PPP COUNT to EMAIL

Re: PPP COUNT to EMAIL

Re: PPP COUNT to EMAIL

PPP COUNT to EMAIL

Re: Clear tape on UFL connectors?

Re: All my clients computers show ip conflict

User Manager Download Limit