Thanks fewi. I'll try a netinstall tonight and see how it comes.

I know that this is not the most interesting post to read, but my problem is becoming worst every day. I have to reboot my rb1000 and when it restarted I lost all my "/ip firewall nat" configuration. Luckily I made an export previous to the reboot, so I can recover it, but I don't know wha...

I'm having a huge problem in my RB1000 RouterOS v4.9 It reports "disk full" and, If I change any config, when I restart the router all changes are lost. I tried to uninstall some unused packages (calea, hotspot, etc), but it does not erase them (maybe becouse it can not save any changes!)....

I have installed RouterOS v5beta4 in a X86 server IBM x3200 M2 I create a scheduled job to make automatics backups of my config and userman database. The job sends an email with that information, but most of the times the mail does not reach the server. I'm using a local server based in qmail, and i...

I have installed RouterOS 5.0beta4 in a IBM x3200 M2 succesfully. [admin@MikroTik] > system resource pci print # DEVICE VENDOR NAME IRQ 0 04:03.0 ATI Technologies Inc ES1000 (rev: 2) 10 1 0c:00.0 LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS ... 5 2 03:00.0 Broadcom Corporation NetX...

Thanks Normis. I'll try again, but I already boot that board for more than 40 times, and only in two times I could get some response. In the manual says that I have to press "any key", "del key" or "backspace key", depending on the hardware. Is there any chance to know ...

To enable netinstall I need to access via console first. And I can't do that.

I have an old RB133. It was running fine with RouterOS 2.9.x but I updated the RouterOS and now the router does not respond. I connected to the console port with a null modem cable, but I couldn't get almost any responses. I'm using hyperterminal with the proper port configuration (115200-8-N-1). I ...

To make an update on this topic.
I have the same problem on one RB600 with fw 2.15, RouterOS 3.10, without any minipci.
Yesterday I updated to the latest firmware I found (2.16) and the latest RouterOS (3.15) and the problem persists. Three or four times per day, the rb600 is rebooted unexpectedly.

Hello list, this is my first topic. I'm having a problem on a RB433 with routeros v3.11 I have the following topology: PC --<wl1>-- RB433 --<eth1>-- ISPRouter ----- Internet The ISProuter has a public /29 network on his eth. I want to assign one of those public IPs to the PC. The RB433 is working as...

Hello: I have a MT 2.8.26 installed as a pptp server. Everything works fine, clientes logs in and out perfect, traffic limiting works great. I start playing around with firewall rules to filter traffic for some clients. I did the following steps via winbox: 1) Create a chain called "ppp", ...

I understand the meaning of input/output/forward chains, what I don't understand is where do I have tu add a Jump chain. If I add it in the forward chain, do I have to add one jump for each chain I made (aprox. 5 chains, one for each profile)? Which traffic should match that Jump? If I have to speci...

Hello list, i´m a bit lost trying to configure some filters in ppp profiles. I'm using 2.8 RouterOS licensed with LEVEL-4 I have created one chain for each profile, and configured it in the profile properties as "incoming filter" (p.e. chain "mail", chain "http", etc.)....