MikroTik

nightstar

try
Code: Select all
/system hardware set multi-cpu=no

I tried, now it can't start anymore....it stuck on: "loading system with initrd" and after some time it writes few times: "read: 00000005"
What's that mean? can i restore somehow to previous state (multi cpu=yes)?

Regards!

nightstar

Hi! I just bought mikrotik 4.2 with license 5 for x86 system, changed my main device on the network and that become a problem... That device is working as pppoe server with routing and eoip tunnels to my access points, it's working for some time (few hours) and then suddenly restart (in logs it says...

nightstar

Maybe you didn't enter proper DNS settings?

nightstar

Hi! I have some mikrotik access points where are two or more wireless cards bridged together. Can i use horizon feature on bridges, so wireless cards doesn's forwards traffic on each other? Same horizons doesn't communicates with each other right? WLAN1 HORIZON 1 WLAN2 HORIZON 1 and so on..... Thanks!

nightstar

Greetings to all! I want to change my x86 mikrotik pppoe server with routerboard. It will works MPLS, firewall, for about 200-300 simultaneous pppoe connections,some routing....etc. I think i don't need RB1000 for now, because my main link will be 15 mbps, and that is not some very high bandwitdh. C...

nightstar

What about having both PPPoE running in the same network together? Freeradius assigns dinamically the ip addresses with radippool.. and if one of the two pppoe dies, the other one will take all the job while you fix your problem :) Hello! I don't use radius to assign dynamic ip addresses, the AC is...

nightstar

yes you can do that. best if you have some radius server for auth (or have doubled secrets on both RB's) and then just set the second RB to ping first one, when ping fails turn on pppoe :) Hello, Thanks for the quick answer! I need little more info, yes i'm using freeradius on linux. So i need VRRP...

nightstar

Hello! I have one concentrator running mikrotik, i use PPPoE protocol for authenticating users. So i want to add another identical machine, so i have two concentrators, if first fails other is getting his role. Is it posible with Mikrotik? do i need to use VRRP or what? Please give me some advice :)...

nightstar

EoIP doesn't "decrease the MTU" on any interface. The EoIP interface itself will transport a 1500 byte MTU just fine. Since the EoIP interface is encapsulating Ethernet frames in IP packets and sending those IP packets on networks supporting 1500 byte MTU's (usually) then the IP layer wil...

nightstar

Greetings to everyone! I need to know is eoip tunnel decreasing MTU on the interfaces? what if i have 30 bridged eoip tunnels on one machine? I want to start using eoip tunnels instead transparent bridges on my network, so i need to know is there some better solution to use than EOIP? Thanks in adva...

nightstar

Hi! I want to start using OSPF but i don't know how. I tried to search in google for a example posts, but it looks like it's very complicated, i need some simple examples: 1.when i activate OSPF, then i need to remove bridges? 2.In my links i still use ap bridge+station wds to connect two sites? 3.I...

nightstar

Hi all! For about four years i had bridged network, it grows up very large and now when some device crash my entire system become unstable. I want to migrate to routed network, i have public and static ip addresses on my access points, and some static routes, which is better way to start: dynamic or...

nightstar

Greetings! I want to create some simple firewall for my servers. i want this scenario: ip address zzz.zzz.zzz.zzz has open port 80,443,110,35....etc, close all other ports. I tried: ip firewall filter add chain=forward dst-address=zzz.zzz.zzz.zzz protocol=tcp dst-port=80 action=accept and so long fo...

nightstar

Hi!

I need to know what is the real power of routerboard 1333, is it stronger than Intel core2quad with 4+ GB of ram?

or how many simultaneous pppoe connections with average speed 1/1 mbps it can handle if it works like pppoe concentrator?

Thanks again!

nightstar

Hi! I want to start monitoring my network usage per kind of traffic (https,https,pop3...) but i don't know what is the best sollution Do i need to mark packets and connections with desired ports, then create simple queues with that packet marks, and use OIDs of queues to connect with MRTG? or there ...

nightstar

Ok, i tried to search the forum from the beggining, i tried something like this: http://forum.mikrotik.com/viewtopic.php?f=1&t=17797 Mr. Gmeyer guide, but nothing....still the same thing: traffic is always going through the one gateway that doesn't have routing mark, if i disable this static rou...

nightstar

Help?

nightstar

Have read what was in the link I provided in previous post? In v3.x you need /ip firewall mangle add action=mark-connection chain=prerouting connection-state=new \ in-interface=eth-private new-connection-mark=odd nth=2,1 \ passthrough=yes add action=mark-connection chain=prerouting connection-state...

nightstar

This is my config: add address=XXX.ZZZ.22.179/24 broadcast=XXX.ZZZ.22.255 comment="" disabled=no \ interface=eth-link1 network=ZZZ.XXX.22.0 add address=172.31.1.23/16 broadcast=172.31.255.255 comment="" disabled=no \ interface=eth-private network=172.31.0.0 add address=XXX.ZZZ.11...

nightstar

Hi! i want to do load balancing between two links. They have different static public IP addresses and gateways,and i want to masquerade them in the end. I used guide from the wiki mikrotik "load balancing with two diferrent gateways" or something like that but nothing, it is writen for the...

nightstar

Thank you very much for the help!

Hapy new year!

nightstar

station-wds - the interface is working as a station, but can communicate with a WDS peer wds-slave - the interface is working as it would work in ap-bridge mode, but it adapts to its WDS peer's frequency if it is changed Thank you very much for quick answer, i need to know one more thing: is it bet...

nightstar

Hi!

I wonder what is main diference between wds slave and station wds, for now i use wds slave-ap bridge mode, and it's working very good, but if i use station wds (it can be bridged, not like station mode) will that mode follow channel on the ap if i change it?

nightstar

33 views, nobody to leave a post?
nobody know what is it?
people, i need help with this quick! i know that this is some problem with routing, but i can't solve it by myself.

Regards!

nightstar

Hi! I have some problems with my mikrotik access points. in wireless registration table when i try to ping some client, it return me some ip address of another client that is connected to other AP. It's start to happen after i change some things on the network: i added smart switch between three mik...

nightstar

Hi! I need to create script that will backup my access points every week on the night. I created simple script, but i need backup to be sent to remote location automaticaly. How this can be done, i tried something from wiki mikrotik, but nothing happens: /system script add name=Fetch source=/tool fe...

nightstar

Hi! This is the situation: i need to connect two diferent offices with VPN, so they can use some software that works like in LAN. Can i use only one mikrotik to be VPN server, so in the other office they connect with windows xp VPN client to the server? or is it better to use two mikrotik routers, o...

nightstar

In winbox I do not get any "seetings" tab when cliking on the bridge menu. I just get the following.

Best regards Pilgrim

Yep...it looks like you need to upgrade to RouterOS 3.x

Best Regards!

nightstar

Thank you Sergejs I didn't manage to get the setting entered. I tried as pasted in below. Please could you - or any other kind person on the board here give a hint where I am going wrong. Thanks, Pilgrim [admin@MikroTik] interface bridge> pr Flags: X - disabled, R - running 0 R name="bridge-1&...

nightstar

Hi! Let's say there is three APs A,B,C and main router D, running routeros 2.9.51 All three access points are connecting to main router (D) in wds slave mode. What i need to do, so my clients don't see each other in LAN because they sometime share files,and consume lot's of network bandwitdh. I trie...

nightstar

Nobody knows how to do this? can anybody help me with this please.

nightstar

I finaly made it! The problem was on the server, i didn't assign a valid DNS of my ISP.... It works with proxy-arp=on thanks to Chupaka, and other people who helped me, i need to solve one more thing, i think it's simple problem like this, but i need help with it: :) http://forum.mikrotik.com/viewto...

nightstar

Hi I just installed Dude server on the routerboard, when i try to connect to it via dude from my PC, i specify IP address, username & password of the router, but it says: wrong username or password. I don't know what is default usename and password, or where to specify it. I didn't find any comm...

nightstar

Hi! I need to know how can i bridge two different subnets: Example: 192,168.0.100/24 MT1 192.168.10.50/24 MT2 when i try to ping mikrotik1 from mt2 it's say destination host unreachable, or something like that, they are conected through lan cables. I know that something need to be done with routing,...

nightstar

I added one ip address from the block of addresses to the lan card on the ISP modem (mikrotik) ,and another to the server, some routes and rules too: 266.266.266.x subnet is example :) MODEM: ip address add address=266.266.266.1/27 interface=ether1 ip route add dst-address=266.266.266.3/27 gateway=...

nightstar

Hi!

If i create a credit in user manager that expires in one month, create user, and assign him that credit, will that time be counting only when he is connected, or daily?

nightstar

MikroTik RouterOS has option, service-name (text) - the PPPoE service name. Specify different service-names for PPPoE servers, specify appropriate service-name on the PPPoE client configuration. Yes this works, but before i made a second PPPoE server, i did not assign a service name to my clients, ...

nightstar

I added one ip address from the block of addresses to the lan card on the ISP modem (mikrotik) ,and another to the server, some routes and rules too: 266.266.266.x subnet is example :) MODEM: ip address add address=266.266.266.1/27 interface=ether1 ip route add dst-address=266.266.266.3/27 gateway=2...

nightstar

so you have a /24 public ip lets say 266.266.266.0/24 your gateway has 266.266.266.1/24 IP address the question is.. does your ISP know that to serve an ip 266.266.266.50 has to go to 266.266.266.1? otherwise ur ISP knows only what is directly connected to him, but nothing about what is behind ur g...

nightstar

I writing same question again, but on the another section on this forum because nobody help me there with some example, or to point me to some link or tutorial. I create a pppoe server on mikrotik 3.14 without linux radius server, but problem is that i can't route block of public ip addresses. I cre...

nightstar

try set arp-proxy for your uplink interface
did you tried?

Yes, but nothing

Can anybody help, please?

nightstar

You need to get your ISP router to route back to the Mikrotik for those addresses. My ISP router is mikrotik too, that works in wireless station mode, in route list it only have some gateway assigned, and some dynamic route. So what i need to do to route back ip addresses to the server? Please give...

nightstar

Hi! I get a block of public addresses and i have a problem when i want to assign address to my users.I run a mikrotik PPPoE server without linux freeradius, and other servers like that, i create a pool with public addresses and when anybody tries to connect, they get public address on connection but...

nightstar

Hi! I have one pppoe server that works on the mikrotik with linux radius. Now i want to make one more pppoe server, but only certain users to need to authenticate on new server, not all. First server and entire wireless network is in the 172.31.0.0/16 subnet, so how can i make new server to use same...

nightstar

Hi!

I need to know what is use of mark routing in ip-firewall-mangle on RouterOS?
what can be done with this option?

Thanks again!

nightstar

Up to 200 pppoe connections?
But UserManager can have up to 20 active sessions?

I need simple information: how much pppoe or vpn connections can usermanager handle? 100,200,300, depends of license?

thanks again!

nightstar

Hi I have problem with PPPoE server running on mikrotik with usermanager. My users can login to server twice with same username. PPP-Active connections show: pppoe-xxx, pppoe-xxx2 for the same username, in pppoe profiles i check "only one" to yes and "one session per host" to yes...

nightstar

Hi I want to create PPPoE and VPN server with RouterOS, without Linux radius server. I know this topic is explained hundreds times, but i need help again :) 1. I wonder if i get a link from ISP, and block of certain number of public addreses, can i route it to my clients, to every PPPoE or VPN connc...

nightstar

Hi!

I wonder can mikrotik work as DNS server?

I' m using ROS 3.11

nightstar

To allow 1 Mbps for 3 users, it's better to use PCQ. Note, when user is online, it gets 1Mbps, 2 users 1Mbps/2, 3 users 1Mbps/3. Specified Traffic/Number of users. http://www.mikrotik.com/testdocs/ros/3.0/qos/queue_content.php#.6.3 This is my setup, it limits only download, but not upload, i don't ...

nightstar

Hi! I want to make this kind of limit: let's say user1,user2,user3 have 512/512kbps download/upload rate, i want to group them in one queue and give them 1mbps so they can't achieve full speed all together connected.But i don't want this queue to affect to other users,only certain users. i think thi...

nightstar

Hi!
I wondering what is the use of layer 7 protocol?
i read somewhere that it can limit more P2P softwares.

nightstar

the best way to do that is , in the terminal windows type: export file=backup it will criate a rsc file with all your current configuration written. install the new mikrotik upload the file via winbox or ftp and type import file=backup and then press tab and enter. it will load all your old configu...

nightstar

Hi! I want to transfer entire configuration from routeros 2.9.27 to 3.11 i need help with this.Can i someheow make some kind of backup file on 2.9.27 and transfer all settings to 3.11? So i don't need to set up all things from beginning on the new router. Please write me some short tutorial how to d...

nightstar

Here’s the approach that I learned…. 1. mark the P2P connection in pre-routing 2. mark the P2P packets in pre-routing. 3. set up a simple queue to limit the flow of those packets…. / ip firewall mangle add chain=prerouting p2p=all-p2p action=mark-connection new-connection-mark=p2p-conn passthrough=...

nightstar

P2P can create alot of connections. I'm not a big fan of allowing any P2P because of this on a wireless network. Also what version of router OS are you running?

I'm using routeros 2.9.27, how can i limit p2p connections by user?

nightstar

Hi, I tried to make some rules for limiting p2p,http,and other protocols,and i messed up all. Now i want only to limit p2p in the simpliest way: i added simple queue set target upload and download to 256k P2P=all p2p interface=interface where accepting pppoe and pptp connections i didn't set target ...

nightstar

Hi, i need help with three things: 1.How i can limit all p2p programs,not only some that are listed in mikrotik/queues (make some kind of filter) ? 2.How i can see which services is used everyday,and how much each service use network resources (mail,p2p,http...) 3.I want my users who pay bussiness p...

nightstar

VPN is the solution, don't forget to forward the right port from your adsl router

Greetings,
i'm not very familiar with mikrotik, so can you write some short tutorial,how to make these things to work? and i'm not using ADSL, i use wireless internet.
Thanks!

nightstar

Hi! i wonder can i make somehow my home router visible on the internet? it have a pppoe conection with public static ip.
And what i need to setup on mikrotik to be able to access to my computers that are behind nat ,from another place?

Thanks

nightstar

Greetings! Your info is limited, but since you can ping Google from the RouterOS box, I will presume all is ok there. Can you ping from the wireless clients by IP? If not, can you ping your gateway from wireless clients? In your dns settings, do you have allow-remote-requests=yes? Hi, the problem w...

nightstar

Hi, i need help,i want to setup my routeros to work as standard wireless router. I added two ethernet cards,and one wireless card on some old PC, and installed routeros. I added ip addresses to ether1 (public interface) and wlan (local interface for conecting my computers),PPPoe out,dhcp server,masq...

Search found 62 matches