MikroTik

challado

Same issue here on HexPoE - health stats in webui and cli show zero Volts. Worked with previous version. Upgrade path - stable versions only 7.17.2 (working) direct to 7.18 (stable) I have a problem, after updating to 7.18 voltage reporting shows 0V At 7.17 it worked just right <snip> Same here. Vo...

challado

Yep. Same here too.

challado

Me too.
Several POWER OUTAGES on log without any explanation. I have switched power supply, power it over ethernet, with no success.

challado

Good morning. I have some VPLS that won't re-connect to your peer when one side goes down for any reason (energy problems, ptp problems, etc). I use mikrotik version 7.12.1 to do that VPLS. On A side (VPLS destination) /mpls interface add disabled=no interface=sfp-sfpplus1-328-MPLS /mpls ldp add dis...

challado

Same problem here. Wifi problems with HW-OFFLOAD on hAP ax^3 Latest versions of mikrotik solve the problem to some hardwares, bring problem to others. Solve to others, back to some. Very complicated. Unable to get hardware offloading working on a hAP ax3 (C53UiG+5HPaxD2HPaxD), any suggestions? /inte...

challado

Same problem here. And with a linux openvpn client, all works fine on UDP too. Only with mikrotik I have these problem. Did you find any solution?

challado

Anav, I won't understand so good your question, but my English is poor. In really check-gateway=ping is a good choice to detect problems to your router, but... If the problem is ACROSS the router, never detect link downs. Here we have several problems with that with two links for redundancy. The int...

challado

No. I have posted same post, in different topics, that are excluded. Perhaps anyone are annoying with my sincere opinion, because simply have EXCLUDED my post and another topics in forum. But OK, it won't change the reality: product have bad project and bad design, only with low price and nothing mo...

challado

No. I have posted with the hope that something in Mikrotik read these. As you can say, several users post, without answer...

challado

I think that "if the value is not set, I WON'T WILL use these metric", but mikrotik put on it a DEFAULT value, and all metricits works only with AND operator, not with OR. Simply is inneficient and bad designed.

challado

I disagree. Yes is a rocket science because every vendor do your understanding about Word, nature, Global Warming, etc. In manual simply but "thr-loss-percent". But HOW thr is these? Is average of all tests? What is? and thr-rtt-avg? What is? And, obviously, these information is ommited on...

challado

Solution found: let'sencrypt, as default, generate ECDSA key, unsupporte by mikrotik. Use --keytype rsa on certbot command to generate a let'sencrypt RSA key, that works on mikrotik.

challado

Any solution? I have same problem here.

challado

Please finish command line support, many items are missing, once completed you would open up a wide range of possibilities with scripts. We may automatically add discoveries to our networks and create maps fully automatically.

+1. Agree with you.

challado

Did you have any progress with these Natan?

challado

The most important feature on a monitoring system is the capacity to interact with them. The dude doesn't have ANY form to interact with your data. Doesn't have a simple programatically add devices, neither in API, neither in Console. Observium, nagios, prtg, zabbix, all of these have a way to inter...

challado

Did you ever get an answer to the questions about Default Authenticate and Default Forward? I too, want to authenticate only certain signal levels via an access list entry.

Waiting for these answer too.

challado

Josh Put the keys here, in my concern, can cause a chance to anyone have access to my keys. But I promess that I won't repeat any key here. I have thinked to create several instances of wireguard but on Linux it works like a charm. But to solve problem I'll do that. put the keys in here? What? When...

challado

challado, to get the fastest support - its easiest if you can provide us with your complete configuration so that we can review and provide the changes necessary. Snippets of configuration omit key details that could be causing or contributing to the issues you are facing. a network diagram would a...

challado

The problem is your central router having 192.168.10.0/24 in allowed addresses. It will map that to just one peer. Thanks for your reply eworm. If I remove 192.168.10.0/24 from allowed-peers, the communication between routers are lost. All communications between central router and peers are OK and ...

challado

Why are you wasting our time. Read the article, provide a diagram and put in an honest effort here if you want help, my help anyway. I have put the configuration above. I won't see any "wasting time" puting it on here, because a word to the wise is enough. It's a mesh network using wiregu...

challado

Less talk, more config. If you can't understand the cenary with few lines, sorry for you. But, follow the configuration to help you with your difficulty to understand. On central Router /interface wireguard add listen-port=14340 mtu=1420 name=wireguard-wg0 add listen-port=14341 mtu=1420 name=wiregu...

challado

Hello all. I have several sites to integrate using wireguard. Each site have your internal class C network (192.168.XXX) and all sites need to communicate with each other. I have configured a central point with address 192.168.10.1 and I have estabilished a OSPF PTMP route distribution with these ro...

challado

You can load the backup bootloader to the Device. Then when it successfully boots you can use the force-backup-booter=yes parameter. Or downgrade ROS and then upgrade the Firmware to that version. To load the backup bootloader hold the reset button and only then apply power to the device. As soon a...

challado

Sended to mikrotik and no response at all.
Problem still continues ignored.

challado

All devices are with version 6.48.x and firmware on same version.

challado

I have upgraded a powerbox now and same problem: only recover device using netinstall. These version corrupts the bootloader sector

challado

I have the same problem here.
I have bricked several devices upgrading the firmware to version 6.49. All devices are SXT.

challado

Open a ticket on support. If you won't open it, Mikrotik will do nothing.

challado

Dear Developers. Predicting the error, you put a error message on the system and simply IGNORE the queue creation. If you have putted that alert, certainly you know the bug, but insert the new feature... Now, how I solve the problem? I have a lot of radius client with dhcp that simply doesn't insert...

challado

Well, no answers... I believe that problem is to lock a resource that mikrotik team doesn't like to work in your devices.
I'll think better in a future when I waste my money with mk products with design problems / os problems / people-that-think-how-resources-i-can-use-in-MY-devices problems...

challado

Bug on this new interface.
Bridge filters with in/out interface simply "disappear" from winbox but still appears on console.

challado

The question is why? Have any good reason to that? If not, I consider it a bug!!!
On time, the problem occurs with my S4 even I do a complete power cycle on Routerboard. The phone isn't detected as media share and won't enable option to activate thethering.

challado

/system routerboard print routerboard: yes model: 751G-2HnD serial-number: 2F860125DA99 current-firmware: 3.12 upgrade-firmware: 3.12 /system resource print uptime: 2w3d7h59m13s version: 6.10 build-time: Feb/12/2014 13:46:18 free-memory: 44.9MiB total-memory: 64.0MiB cpu: MIPS 24Kc V7.4 cpu-count: ...

challado

Hello All. I have a Samsung S4 smartphone with 3g chip. I have an 751G-2HnD Routerboard acting as Access Point in my office. When I plug my smartphone to 751G-2HnD, all works ok, the cellphone is detected w/ success. I go to thethering option and turn on the USB Anchorage, Mikrotik detect the lte0 i...

challado

ffernandes Please make sure there is no problems on layer2 network at your setup (broken card, wire, etc.). there was no problem with v5.20 ..... this rx drops only appeard in the 6.0rc1....... Same problem with me. I Already sended a supout.rif file to support.mikrotik.com. That's is the answer. H...

challado

I have found the solution for the problem
In tools, Traffic Monitor, we can do what I need.

Thanks for your help

challado

Hi Folks. Mikrotik have the rate estimator module? In linux, I can estimate the rate in/out in a interface and I can do something based in data from these rate estimator module, from iptables. When a one link is full, I can redirect some traffic to link X, if I need. Mikrotik have these resource, as...

challado

Hello Friends I have a problem to solve, and I need a ligth in the end of tunnel. I have 3 BGP servers. These 3 BGP servers make a full routing with another 3 different peers (3 servers X 3 links = 9 different links). I will call these routers the Router A, Router B, and Router C. The problem is tha...

challado

Upgrade for new version (4.4) and still persist problem.

I use the cards only in B mode, won`t in B/G. In my case, fix the rate in 6 Mbps is only possible if I use the B/G mode.

I try to fix the speed to 1/2/5.5 and/or 11 Mbps, but the problem persist.

Downgrading the version again.

challado

But the problem isn`t in nstreme! I use this cards to my 2.4 clients.

The problem is with my clientes, don't in my point-to-point connections

challado

Yep

With the card
DWL-G520 on x86 4.3 version persist the problem
R52H on rb433 bootloader 2.23 mikrotik 4.3 we have problems too.

Very strange.

challado

I upgrade to 4.3 version, the problem persist.

The only answer that I think is that the Hotspot rules in firewall destroy the mangle rules to insert any another mangle rule to hotspot!

Still waiting solution.

Thanks

challado

Hi folks... I'm having problems with client signal (and connection/disconnection issues) when I upgrade my rb's from 3.30 vrs of Mikrotik to 4.3. The clients, before the upgrade, have -64, -63 dbm of signal. After the upgrade, have -72,-78,-80 and worst. Another case is clients that have signal with...

challado

Follow the Mangle table and the queue tree I have only two network interfaces: The network schema [cisco router]----(router interface)[Mikrotik 4.1](omni interface)----[clients] /ip firewall mangle add action=mark-packet chain=prerouting comment="" disabled=no in-interface=router new-packe...

challado

Hi all. I have a RB600AH mikrotik router mk 4.1 version. Before I activate the Hotspot in this RB, I mark the packets using the PREROUTING MANGLE chain, and, in Queue tree, i associate a queue and make the traffic shapping and classification very fine. When I active the hotspot, without change any f...

challado

Hello Friends. Recently, I change a machine with Linux and two AG-530 cards by a RouterBoard 333 with Mikrotik RouterOS with Atheros AR5413-based chipset (mac 00:02:6F:4E:88:75, I don't know the card's manufacturer). Well, I have a Ovislink AP-1120 with R8180 chipset and a Ovislink AP-5000v2 (athero...

Search found 47 matches