MikroTik

juibar

petrik,

Everything you say sounds great, but are your comments based on something you ever tested or just suppositions?

Thanks,
juibar

juibar

Thank you all for your inputs. danletkeman, My customer cannot dig across the street. ste, Laser is an option too. Any laser manufacturer you can recommend? marksx, You mean 4 wireless cards on each end for bonded Nstream dual? But is not true that bonding is rather used for load balancing and failo...

juibar

jorj,

If you read the subject, I did mean wireless. Cost is not an issue here, but I am really looking for 100 Mbps or higher.

From the forums, it looks to me that Nstream dual can provide the highest throughput, but how high for that distance and with what hardware?

Thanks,
juibar

juibar

I need to set up a link between two buildings located 50 meters apart from each other. There is LOS between the two ends.

What hardware would you suggest to achieve the maximum bandwidth and what would that bandwidth be?

Thanks,
juibar

juibar

jo2jo, Spammers use port 25 to send emails, so I actually want to set our outlook clients to use a different port to send emails, and have the MT box block port 25 and change the port number in email packets back to 25 so that they can be routed normally. Therefore, I am looking to change the port n...

juibar

jo2jo, I saw your post here: http://forum.mikrotik.com//viewtopic.php?t=9397&highlight=smtp+redirect, but this is not exactly what I want, as the IP address should remain unchanged. As for your questions, yes, I am using NAT masquerading. Regarding your edit, I understand what you are saying, bu...

juibar

Sorry if this has been asked before, but at least I could not find in the forums. I just want my MT box to identify packets going to port S and replace the port number, such that w.x.y.z:S --> w.x.y.z:T, where w.x.y.z can be ANY IP address. I tried to do it with the rule below, but it did not work b...

juibar

I put a non-zero IP address in the field "To Addresses" and this time it worked, but what I really need is to change the port in the IP packet leaving the IP address unchanged.

I will appreciate your help.
juibar

juibar

cmit, I am trying to use the firewall rule you suggested, but my outlook client will not send emails. I even edited the rule to "redirect" from port 25 to port 25 and still outlook will not send emails. Below are my rules. 0 ;;; masquerade hotspot network chain=srcnat src-address=192.168.0...

juibar

Please send it to jbibarra@gmail.com

Thanks,
juibar

juibar

jfan,

Please check the link, as it does not work.

Thank you,
juibar

juibar

jfan:

Can you post your configuration?

I appreciate it.

juibar

juibar

Here is a drawing of my intended setup. http://www.teltian.net/files/papagayonetwork.jpg In black is the current network and in blue what I am trying to do, which is sharing a PtP link to provide wi-fi Internet hotspot service to users at location B from a broadband Internet connection at location A...

juibar

I set up the two MT routers as suggested, but now it turns out that I can ping stations out of the VLAN!

For instance, I can ping a station on vlan 2 at location B from a station on vlan 1 at location A.

What am I doing wrong?

Thanks,
juibar

juibar

Sorry for not mentioning, but the PtP link is based on Proxim Tsunami radios and I am planning to add a MT router at each end to handle the two VLANs. Would this still be possible?

Thanks,
juibar

juibar

I have two locations, A and B, connected together over a PtP link and now I need to set up a new network between A and B sharing the PtP link while keeping both networks logically separated. I think VLAN is what I need. Could someone give me a basic setup -beyond of what the manual has? Can I do thi...

juibar

Yes, it could be a firewall problem. Check the folders' user permissions as well.

juibar

juibar

Edit your files hosts and lmhosts and add the hostnames and IP addresses of the hosts at the office.

Regards,
juibar

juibar

From time to time, when I connect to an MT router via WinBox, some plugins are downloaded before the main WinBox window is displayed. And this happens without having upgraded the router or anything. Why is that?

Thanks,
juibar

juibar

I have version 2.9.7 installed on a RB-532 and when I open a terminal window either from WinBox or via SSH, I get the ASCII-drawn MikroTik banner, but not the command prompt.

I generated the supout file, but I do not know how to attach it here.

Thanks,
juibar

juibar

Since both ends are now bridged, would a single DHCP server suffice for the two LANs? Also, on a related note, step 4 of the EoIP manual says, "Addresses from the same network can be used both in the Office LAN and in the Remote LAN". What IP domain would those addresses be in? Would that ...

juibar

Yes, sergejs, that did it. Thank you!

juibar

juibar

I have two LANs that I want to bridge through a PPTP tunnel over the Internet. Each LAN is connected to a MT router with a private interface on which there is DHCP server/masquerade. And of course, a WAN interface. So I first set up the two routers as per the "Router-to-Router Secure Tunnel Exa...

juibar

It looks to me that the RADIUS server is case-sensitive for both username and password, right?

Is there a way of setting it up such that ONLY passwords are case-sensitive?

Thanks,
juibar

juibar

Thank you for your reply. I tried your suggestion and it did not work. By the way, I noticed that I have two srcnat chains. Can the problem be related to this? Also, the counters of the dst-nat rule increase when I try to login the AP, but I get no reply. How can I find out if a filter rule is block...

juibar

Going back to the original post by shanen_au, I also need to remotely manage an access point behind a MikroTik hotspot. In my case, I just want to be able to reach the AP through the http port, which is configured to be 82. And even though I followed the information on http://www.mikrotik.com/docs/r...

juibar

Is the SMTP authentication coming in MikroTik OS any time soon?

Regards,
juibar

juibar

You probably know this by now, the radio card sockets are different because the 532 takes mini-PCI cards while the 230 uses PCMCIA cards.

I don't know about performance their performance though.

juibar

juibar

Take a look at http://www.mikrotik.com/docs/ros/2.9/ip/hotspot, especially the section called "Customizing HotSpot: HTTP Servlet Pages".

juibar

juibar

I did everything over: download, burn and install... same result.

Now it's official: my computer does not support MT v2.9rc7. I'll have to stick to v2.8.26.

juibar

juibar

I reinstalled v2.9rc7 several times and got the same result. I reinstalled v2.8.26 back on the same computer and it booted normally. There is definitely a problem with my v2.9rc7 install. Is it possible that my CD image is corrupted somehow? Is there a way of checking the integrity of the file I dow...

juibar

Where could I download previous versions from, for instance 2.9rc5?

Thank you,
juibar

juibar

By cycle I mean: 1- I turn on the PC 2- The computer does memory scan, loads BIOS, etc 3- The screen displays "Loading system" 4- The screen gets black 5- The computer goes back to step 2 I downloaded the CD image from MT Web site (http://www.mikrotik.com/download_rc.html) and burned it. I...

juibar

I installed MT 2.9rc7 on a laptop computer for testing purposes. Although the installation went through smoothly, the system will not boot. It just cycles. :roll: The computer is an IBM TP 600E with a Pentium II processor. BTW, I had MT 2.8.26 working fine on the same computer before. Has anybody ha...

juibar

I am testing MT to use it at my hotspots, which run with Airpath AAA. In order to change the default login page, I followed the hotspot servlet section of the Hotspot manual. However, even though I get the Airpath login page, I get redirected to the same login page after entering username/password. ...

Search found 35 matches

Re: Maximum possible bandwidth for wireless PtP link

Re: Maximum possible bandwidth for wireless PtP link

Re: Maximum possible bandwidth for wireless PtP link

Maximum possible bandwidth for wireless PtP link

Port redirect

VLANs with RB-532?

Download of plugins

Command prompt disappeared

DHCP not working with bridged EoIP interfaces

Case sensitivity of built-in RADIUS server

Previous RouterOS versions

MT 2.9rc7 unable to boot

Airpath login page