http://www.roamad.com are using mikrotik equipments to support their own os, and they mention someting like they can actually support up to 8 radio per node.
so i think it will be ok just to support 3 radios

regards

Kipel,

Can find much information here, like firewall rules, cache ruls and etc

regards

hi all,

anyone try anything with realtech chipset ?

regards

Why not order the cards ONLINE!? Now that would be neat if you could actually order things over the internet that you could not get locally! /sarcasim

i have try order online but most of them dont delivery to my country or the freight charges cost a lot, like triple the price of the cards.

regards

Eugene,

Thanks for everything, it works great now. Can you please let me know if there is any documents i can find on mikrotik for more detail setup guide or training materials.

Regards

yogi,

how do you check if the the computer is running at 100% cpu-load?

regards

Eugene,

What about "/ip firewall rule input add src-address=192.168.0.0/32 "

Thanks & Regards

Eugene, with the /24 change to /32 the command "ip firewall dst-nat add in-interface=ether2 protocal=tcp dst-address:192.168.0.1/32!:80 action=redirect to-dst-port=8080" enter without error, but the problem is, the client station are not getting any gateway and dns-server ip address, is th...

Ups, obviously, the mask should be /32 for a single host:

Eugene,

i'm new so please let me know

/32 for single host, by that you mean, single server or single broadband line

/24 for multiple host, and is there anything other than /32 and /24

regards
Robot714

with ip firewall dst-nat add in-interface=ether2 protocal=tcp dst-address=!:80 action=redirect to-dst-port=8080 the transparent web proxy still wont work but with ip firewall dst-nat add in-interface=ether2 protocal=tcp action=redirect to-dst-port=8080 it works. but will i would like to work with th...

Eugene,

ip firewall dst-nat add in-interface=ether2 protocal=tcp dst-address=!192.168.0.1/24:80 action=redirect to-dst-port=8080

ERROR: destination bad

regards

wildbill442, what you mention is true we can onlu used 2 to 3 channel on 2.4, using 3 channel will still gives you some interference if you are using amp to boost signal on all those radio. Another question, how many client station can connect to a 5.8Ghz base radio link through WDS mode ? most of t...

yancho, i have re-format the os and follow the same sets of instruction with your suggestions, but now the client MUST set their proxy before they can connect to the web, it is getting worst, can you please point out my errors. regards /interface enable ether1,ether2 /ip dhcp-client set enabled=yes ...

i have reformat the whole thing and follow exactly on the documents /interface enable ether1,ether2 /ip dhcp-client set enabled=yes interface=ether1 /ip address add address=192.168.0.1/24 interface=ether2 /ip firewall rule input add connection-state=invalid action=drop /ip firewall rule input add co...

added

ip webproxy access
add src-address=10.20.0.0/24 action=allow disable=no
add action=deny disable=no

but still not work can anyone PLEASE HELP

regards
Robot

thanks for the tips guys, by that it should mean tha ti could only get D-LINK on this market ?

still no luck yet, found lots of edimax and prolink cards, some linksys,dlink & cnet but there is no 520 & 650 around.

regards

normis,

MT can goes up to 8 radio so by that it should be able to support up to 800 simultaneous user, correct?

regards
robot

thanks for the reply Eugine

cheers

Hi, Can someone help me out, here is my config please spot my errors interface enable ether1,ether2 ip dhcp-client set enabled=yes interface=ether1 ip address add address=10.20.0.1/24 interface=ether2 (by the way /24 what does that mean) ip dns set allow-remote-request=yes ip firewall src-nat add ou...

Hi,

I know this is out of the question, but any of you guys here provide 1 stop solution for voip calling card ? Maybe we can work together

regards

on how to connect your home network to xdsl line no.9 line 2 ip dhcp-server network add gateway=182.168.0.1 address=192.168.0/24 \dns-server=195.13.160.52,195.122.59 domain="mail.com" can anyone please explain to me why we need this particular line for ? \dns-server=195.13.160.52,195.122.5...

What do you mean by "proprietary cards"?

Off the shelf cards, where you can buy anywhere, i need this information because i stay in a country where there is limited resources.

regards

Hi

I would like to know does RouterOS support any proprietary 54G wireless PCI Cards? Examples D-Link, Netgear, Linksys etc

Regards

Where are you based? Some countries, that's a real problem, others not.

I'm from brunei, our limits are 200mw but will be heading to 1w as we follow sigapore regulation

Mr. stephenpatrick, Thanks for the reply ! But RouterBOARD 532 only come with 200~333 processor, do you have any suggestion on other products which can be install in a Waterproof enclosure ? i would like to reach the maximum throughput, A>--54-->B--54-->C and A,B,C--54-->Public A to B to C on 5.8GHz...

Hi,

I would like to know how many simultaneous user can a single radio system support ? and what will be the maximum setup using router board equipments ?

Regards

Hi,

What do I need to build a 4-radio system, where 2 x 5.8 radio will be talking to uplink, downlink and 2 x 2.4 radio talks to the public? Does RouterOS support such features?

I’ll try to use everything Mikrotik, so please advice.

Hi,

What do I need to build a 4-radio system, where 2 x 5.8 radio will be talking to uplink, downlink and 2 x 2.4 radio talks to the public? Does RouterOS support such features?

I’ll try to use everything Mikrotik, so please advice.

Regards